If you're going to rely entirely on a visual medium (i.e. no text, no voice-over), it behooves you to master that medium and make every effort to exploit its potential fully. This also means not under-cutting yourself. Things to consider relative to this: - light the field within the frame to eliminate shadows, however diffuse, unless shadow is necessary to convey depth or to show contour (see last item);- remove background elements which do not directly contribute information that is of immediate relevance to the subject matter of the current video (e.g. the 'branding' information on your work surface, possibly serving as a watermark, can be eliminated, visually, during the build process, so as not to detract from the presentation);- take advantage of the fact that you own -- and, implicitly, control -- not just the entire frame, but also all aspects and potentials of the camera in use and of the entire editing process to fill the frame whenever possible (e.g. change the number of frames retained per second and switch to macro mode at points where you have succeeded in reaching an intermediate point in the global process, such as when completing the preparation of a sub-component or sub-assembly); - wear surgical gloves or finger cots to bring more, or most, visual attention to the tools, components, and discrete procedures under consideration at any given point (depending on the colour of the gloves, some adjustment to the quality and quantity of lighting might be necessary to ensure that, when relevant, specific manual techniques can be highlighted).
+Michael Thibault i really appreciate your advice Actually it's not just advice because you helped me to understand new things This video was one of my very first videos 1 year ago Now i learned new things you can see in my last video I also used a narrator i know it's not the best choice but i can't do this by myself I want really to say thanks a lot And if there any chance to contact i will be happy :) Find my Facebook page send me a message and i will add you personally :) Thanks again :)
Nice video
It's working !
Sir i found in CFL bulb transistor bd4202 can I use it sir?
Yes it's high voltage fast switch npn transistor
Go ahead
Good luck :)
Can you make 4v to 12 v circuit ? What components will be necessary?
Hi sorry for late reply
I'm not sure but maybe tweaking the coil to achieve more emf saturation can do the job
Plus higher frequency also can help :)
Thanks
No need resistor??
If you're going to rely entirely on a visual medium (i.e. no text, no voice-over), it behooves you to master that medium and make every effort to exploit its potential fully. This also means not under-cutting yourself. Things to consider relative to this: - light the field within the frame to eliminate shadows, however diffuse, unless shadow is necessary to convey depth or to show contour (see last item);- remove background elements which do not directly contribute information that is of immediate relevance to the subject matter of the current video (e.g. the 'branding' information on your work surface, possibly serving as a watermark, can be eliminated, visually, during the build process, so as not to detract from the presentation);- take advantage of the fact that you own -- and, implicitly, control -- not just the entire frame, but also all aspects and potentials of the camera in use and of the entire editing process to fill the frame whenever possible (e.g. change the number of frames retained per second and switch to macro mode at points where you have succeeded in reaching an intermediate point in the global process, such as when completing the preparation of a sub-component or sub-assembly); - wear surgical gloves or finger cots to bring more, or most, visual attention to the tools, components, and discrete procedures under consideration at any given point (depending on the colour of the gloves, some adjustment to the quality and quantity of lighting might be necessary to ensure that, when relevant, specific manual techniques can be highlighted).
+Michael Thibault i really appreciate your advice
Actually it's not just advice because you helped me to understand new things
This video was one of my very first videos 1 year ago
Now i learned new things you can see in my last video
I also used a narrator i know it's not the best choice but i can't do this by myself
I want really to say thanks a lot
And if there any chance to contact i will be happy :)
Find my Facebook page send me a message and i will add you personally :)
Thanks again :)
awesome soundtrack! is that ferrante and teicher?
+ShaggyUltraLounge no it's "if i had a chicken "
Eslam's Lab 👍🙌
Hi. What is the resin you are using?
it's natural rosin
Cool. Thanks!
any time :)
I did the same with 4202BD trasisitor from a broken CFL,
LED did not glow but transistor got heated up ....... reason...?
+Gaurav kumar led shouldn't glow
Have you referred to transistor pinout?
Because maybe connection in your circuit is wrong
Is it necessary to use the ferite ring
It worked with me on iron core before but ferrite is better
what is the number of this transistor
Any npn
السلام عليكم ورحمة الله وبركاته
ما هي نوع الكاوية هل هي كاوية الهوت اير وهل تباع منفصلة
لدي كاوية الهوت اير 50 وات وتعمل على 24 فولت
salem amen هى نفس الكاويه المرفقه مع الهوت اير بس وحده منفصله حجمها صغير
wicked music!
+John James people always complain the music which I choose
So I'll be appreciated if someone suggested me some music examples to use in my videos
John james: How much music you can understand?
Can used 4242Dm
Please bataiye na
how much trun toroit?
Sang Generasi Muda 10 or more
Very smart idea
+HowTo DIY homeMade Electronica thank you :)
Is that rock??
+SUSHMITA RAI no it's rosin for soldering i like it more than paste
Very nice
كم لفه تلفه
هيئة مكافحة تبادل الاشتراكات من 12 فأكثر
thanks good idea.
اشطا أسلم بور سعيديا زى بعضينا اه الله ينور عليك ابرنس
MÒĤÃMĘĎ ÀĻMÃŞŔÝ شفت بقى بذمتك مش فرحت لما شفت كلمة بورسعيد على يوتيوب :)
منور يا صديقى
Can I use 13003br transistor that is inside cfl
Any npn yes
WOOO HOOOOO! THANKYOU!!!!!!!!
Bacterium Gaming my pleasure :)
Great vedio nice
Thanks
Thanks sir
طول السلك كام
Very helpful thanx
buenos
Carlos Valverde gracias :)
subhanallah...
megustan
Carlos Valverde gracias amigo ^_^
useless....
can i use 13003 transistor on this