+Revegelance You realize that is a movie. That relatively would not be possible I mean Roberty Downy Jr (Tony Stark) is not precisely a genius in real life.
did you try to turn it off then on again..?:: ok did you try playing card games with someone?.:: will that usually works.... hmmm.....did youuuu..did you try to call a someone to fix it?.::: will fuck it and get a new one god damn it
That would look a hell of a lot better if you weren't so damn reliant on hot glue. It's got its uses, but it's messy AF. You'd have been better off using superglue or epoxy resin.
you could wire a relay in by itself to rapidly blink and then you add some glow in the dark in a couple of areas so it could look like some areas to looks like it dimming when other parts just go dark
But you can get those in stores. It would be cool if he did but I think he's focussing on iconic props which you can't see in stores. But good suggestion.
I Loved This.. I Have Seem Some Others Before.. But Your Idea Was The Best.. I Will Be Making My Own In 2016.. {After My PaceMaker Upgrade}.. I Have Always Said.. I'm Like (IRONMAN) Just On A Smaller Budget.. This Is Awesomeness.. Thank You Very Much..
for the tube.. if you want to bend easier use a heat gun and warm it up a little until i gets pliable. instead of hot glue use CA glue, its super thin and drys in 20 sec. Ive used CA glue as a coating because you can polish it up and make a glossy hard to scratch finish.
When I made my latest arc rectors, for the light ring I took clear 1/4 in Plexiglas and took a circular drill bit and cut out a hole, then went a couple bit sizes bigger and cut out the ring, then I used my dremel to sand it down and make it opaque and murky, my latest arc reactor, I drilled in 1/2 way into the ring in several areas and inserted 3mm LEDs and wired them all in parallel
if you want to avoid all the hot glue over the place (a lot of people commented that it decreased the projects value) you could use another foggy tubing that is more pliable, or you could use super glue instead of hot glue, or you could use a hot glue stick, shave it down a bit to be thinner, then put it in some warm water to make it more pliable, then glue it to the arc reactor (just some ideas)
Depends: Special editions of games? Not at all. Plastic of something of the hardware store? Depends (again): If you haven't stuffed your house full of it, so your house basically won't be "lifeable" anymore, then nope.
This was rather fantastic. I have to say, though, I was hoping you'd make it so we could wear it under a shirt or something. I guess that's what imagination and work is about! Call me inspired!
his kid's holloween costumes are probably dope af
Yea he makes his kids fly
The problem he had with the plastic tube at 5:10 Could be solved by dipping the tube into warm water until it soften.
Gabriel Abreu Lugão Ooh that's a good idea!
You've watched way too many soft tubing water cooling videos 😜
Or using a heat gun
james while , this is an easy tip that iv found in Cosplays forums/reddit.
I built an arc-Reaktor like this, too.
It looks very nice. Without this video I never had built it. Thank you.
Great!
Now let's cut a whole in our chest so the reactor will tightly fit
Luke Schwartz Yeah
*hole
I'm going to use a dremal but you don't have one you can use a hacksaw, just be a little more careful
Gavyn
Luke Schwartz oof
"Tony Stark was able to build this in a cave! With a box of scraps!"
+Diego Valenzuela well he is not tony stark
+Hrishikesh Siv and stark made a better one once he was home
i dont think missles are scrap
+Hrishikesh Siv its a joke dude, just understand
+Hrishikesh Siv its a referance from the iron man movie...
AWE Me shows you how to make Awesome Stuff! ►► brk.cm/1JsMubC
AWE me Make an Assassin's Creed hidden blade that can extend and retract with a flick of the wrist. That would be awesome for AC cosplayers.
AWE me make a assassins creed hiddemblade
You should do something steampunk
AWE me Make the Hylian Shield or Majora's Mask from Legend of Zelda ;)
Make odin's sword
PORTAL GUN!
Do you want to kill the poor guy ???
Lmao
001100AAAEA It's easy
Yes portal gun!
***** yeah easy step one buy it from the valve store
there is no step 2
After watching all these DIY videos, every time I go shopping I'm always on the look out for items that might come in handy for my prop builds.
Write “proof that tony stark has a heart”
R.I.P tony stark
And plus he died In endgame
sonle ik but he’s not dead irl
@Sarah D the character is though
Now the next step is to carve a circle in your chest and put it in
That would be impressive, but Tony Stark was able to built this in a cave! With a box of scraps!
Revegelance Well I'm sorry, Dustin's not Tony Stark lol
Revegelance and parts from military equipment
And the help with some cool dude
+Revegelance You realize that is a movie. That relatively would not be possible I mean Roberty Downy Jr (Tony Stark) is not precisely a genius in real life.
+Sir FusionMiner How dare you .-.
I want to know how you made that Flux Capacitor in the background :)
Fred Banionis
Same here. I'd put that up in my office.
He made a video on how to make it
Make a Pip Boy from Fallout! That would be awesome.
You should put a blue film over it so it looks more true.
I don't watch to make these things (that would be impossible), but I am fascinated by the talent.
You should specify that its the MK I, "Proof that Tony stark has a heart"
WarMachine216 That's true, I forgot to mention that.
DO IT NOW PLWWWWEEEAAE...
im weird now
Dustin McLean Can you try to make a FLUO future weapon like Lucas Bishop in the film X-Men: Days of a Future Past?
Francesco Cocchiara
apkd
That's great, needs a bit of an ice blue glow though.
kdk
Dustin Mclean was able to build this in his house, with a box of junk and some stuff he got at the hardware store
I used to watch only if Dustin was the one crafting. This is soooo goood
Omg this man used to do homemade movies 🥺
HELP something went wrong, the reactor isnt powering my iron man suit!
Leonard Greenpaw Did you add enough Palladium?
Dustin McLean
That wasnt shown in the video!
Did you turn it off and on again?
Ce Tee
yes! Several times! I even unplugged the modem and router too!
did you try to turn it off then on again..?::
ok did you try playing card games with someone?.::
will that usually works....
hmmm.....did youuuu..did you try to call a someone to fix it?.:::
will fuck it and get a new one god damn it
Would be great if you could list all the items needed in the description. Could you do that, on this episode and the rest, please?
infinity orb from guardians of the galaxy
Now this is the best kind of DIY
That would look a hell of a lot better if you weren't so damn reliant on hot glue. It's got its uses, but it's messy AF. You'd have been better off using superglue or epoxy resin.
Omicron9999 that can be expensive tho. Hot glue is cheap, cools quickly and is easy to use
I thought this was a hacksmith video for some reason.
Same
Don't worry ME TOOOOOOOOOO!!!!!
me too xD
XD
still waiting for him to fly like a mf...
I'm following your instructions so closely that I'm aware that the parts can be found at Home Depot!
There's too much glue.
Yah I thought the same thing
Really like the effect at 7:06, nice one!
"TONY STARK WAS ABLE TO BUILD THIS IN A CAVE WITH A BOX OF SCRAPS!"
1:04 just like where Tony went in iron man 3
why am I even watching this I'm a clumsy fourteen year old
oh my god same
B
Me too
Me three
hey another clumsy 14 year old!😂😂😂😂
great video! can you make a batarange from arkham asylum/city/knight?
you could wire a relay in by itself to rapidly blink and then you add some glow in the dark in a couple of areas so it could look like some areas to looks like it dimming when other parts just go dark
Woah awesome vid and God Bless!
Make the Doctor who's Sonic Screwdriver
Yes
11th doctor please
But you can get those in stores. It would be cool if he did but I think he's focussing on iconic props which you can't see in stores. But good suggestion.
Yes very good idea
MrAltje I'd prefer 10th
did youtube just update?
Pipdockan Their video player, yeah.
Pipdockan looks the same to me
Behemothokun Yeah it did
You should make John Hammond's cane from Jurassic Park
it looks so real😲
I Loved This.. I Have Seem Some Others Before.. But Your Idea Was The Best.. I Will Be Making My Own In 2016.. {After My PaceMaker Upgrade}.. I Have Always Said.. I'm Like (IRONMAN) Just On A Smaller Budget.. This Is Awesomeness.. Thank You Very Much..
Not working, tried to power up my pc with it. Totally waste of 30 bucks -.-
+Pan Severus XD
+Pan Severus you realy made my day bro :D
=]]
that would destroy ur PC, when you book your next flight tell them to power the plane with it
Mine is powering my entire house right now, you must have a wire crossed.
Please. Make a Corvo's Mask from Dishonored...
LOL THE NEW UA-cam
Who still remembers the circular arc reactor? I'm so used to the triangular one now :)
Proof that Tony Stark has a heart.
Make the Pip-Boy 3000
I've been Dustin so now my room is Mclean (say it outloud
WolfieVids NerfMods & More
guys you are playing with Tony Stark's heart😷
sagar kella
he you fool that's not his heart it is used to control the electro magnetic force to stop peaces of the boom
for the tube.. if you want to bend easier use a heat gun and warm it up a little until i gets pliable. instead of hot glue use CA glue, its super thin and drys in 20 sec. Ive used CA glue as a coating because you can polish it up and make a glossy hard to scratch finish.
Nice work DUSTin mClean....future Tony Stark for sure .
Make a PipBoy 3000 from fallout game please (fallout new vegas, fallout 3 and 4)
Ben 10 omnitrix or Capitan America shield
Under the 310 club
Smh
310 club doesn't exist mate.
Proof that Tony Stark has a heart
When I made my latest arc rectors, for the light ring I took clear 1/4 in Plexiglas and took a circular drill bit and cut out a hole, then went a couple bit sizes bigger and cut out the ring, then I used my dremel to sand it down and make it opaque and murky, my latest arc reactor, I drilled in 1/2 way into the ring in several areas and inserted 3mm LEDs and wired them all in parallel
Ok you got the end product but you didn't exactly show us very well hit to make it
built a ironman suit
C'mon give him a break he tried to make it really good. I say he is the real life tony
if you want to avoid all the hot glue over the place (a lot of people commented that it decreased the projects value) you could use another foggy tubing that is more pliable, or you could use super glue instead of hot glue, or you could use a hot glue stick, shave it down a bit to be thinner, then put it in some warm water to make it more pliable, then glue it to the arc reactor (just some ideas)
super excited man
Do the spy's arsenal from tf2
Yah do that
*make a mark 1 arc reactor
Not make an arc reactor
KiKi 😅
Carmen Garcia ??
Halo halo halo halo
please make a web shooter
Joshua Williams ???
I always keep all packaging.
Hoarder?
Depends:
Special editions of games? Not at all.
Plastic of something of the hardware store? Depends (again):
If you haven't stuffed your house full of it, so your house basically won't be "lifeable" anymore, then nope.
Tactical Ultimatum Not if he has an actual use for it
_Savantis _ I meant for light fittings and such
SuperSMT That's what all hoarders say :)
Tactical Ultimatum Notice I said _actual_ use...
This was pretty awesome. Also the TMNT Ooze canister was absolutely BOSS!!!!! #NeedIt
You should give that to Tony Stark, bring him back to life!
Iron man is the movie about harry potter having to fly in The enterprise to blow up the death star to defete saroman right?
Yep, 100%
to destory the evil Ewoks created under the evil lord SubZero and his minions Superman and Batman 😂
webshooter
is your girlfriend Australian???
Tim Jakub Haha no but she does sound like it now that you mention it!
Dustin McLean really good job.
+Dustin McLean will nyou ever at least geust star on homemade movies? please. please, after all, you started it all
I guest starred as Indiana Jones! And reprised my roles as Tony Stark and Haymitch. I'd love to be in more, just waiting to be invited :)
Dustin McLean well yeah, but we miss you man!
amazing work dod
that is soooooooooooooooo sick !
Make a cyclops goggles
"Goggles"...I take it you don't read the X-men comics.
google translate kullandım
can u make a Ben 10 whach
that looks terrible.
+kaarl m lets see you make one buddy
Beautiful
Amazing diy bro 😊
This was rather fantastic. I have to say, though, I was hoping you'd make it so we could wear it under a shirt or something. I guess that's what imagination and work is about! Call me inspired!
Super cool!👍🏼
Your videos inspire me love them👍
good job it looked very nice
this dude is awesome
Dustin the ground,dustin the desk, dustin everythin i can find.
you are a genius dude
Awesome Did you make the thor hammer yet
Very Crazy!!! good Job...
That is awesome! Just found this an thought it was great! Cheers for that!
the funniest part 7:17
JK i hypnotized you, now you will like this comment
looks pretty cool to me
nice arc reactor!
TONY BUILT THIS! IN A CAVE! WITH A BOX OF SCRAPS!
Dead Scientist of the year: Well I'm not Tony Stark
nice of good idea Dustin !!!
Looks great
AWE WAS ABLE TO BUILD THIS AT HOME! WITH A BOX OF SCRAPS!
Would love to see you make a T-Virus container from Resident Evil, I'm sure you would do a great job.
I've done mine as just a bright white disc built into the armour! 🤖
Nice! I am also making Iron Man 3D models and finished mark 1 arc reactor
Walmart sells little Puck lights that are perfect size and no assembly required for those who don't wanna build it.
How cool is that Love it
This is awesome
Iron Man helmet that opens and close, lit the eyes and can see through it
amazing