+radx99 you're right, it is a pretty simple design, but in many ways that's actually harder to do well. With something super fancy you can simplify it a lot and still look good. With a simple design you have to go all out and nail every little bit because there isn't any leeway.
I like that he got away from using a lot of hot glue. That stuff gets all over and makes things look messy. Clean cuts, cement glue and proper bondo blending should be done a lot more on this channel. This set the bar. I hope they don't go in the other direction.
once I went to mcdonalds drive thru and in my best rick voice said "ill have some sezchuan sauce!" then my friend whimpered "uhh rick there isnt any szechuan sauce on the list..."
You should make a plumbus! Here are some instructions: 1. You take the dingle bop and smooth it out with a bunch of shleem. 2. Re-purpose the shleem for later batches. 3. Now take the dingle bop and push it through the grumbow. 4. Now rub it against the phleeb. (This is an important step because the phleeb has all of the phleeb juice.) 5. At this point a shlamy shows up and rubs it and spits on it. 6. Now cut the phleeb. 7. You will notice that their are several hizerds in the way. 8. Have the blamphs rub against the chumbles. 9. Now shave away the plubis and the grumbow. Finally, this leaves you with a regular old plumbus. Total Cost: about 10 phlerbows
Thank you for your kindness. Grandpa wouldn't show me how to build it. You have shown me a great gratitude today. I will never forget it. #JoinEvilMorty
I replicated your DIY Portal Gun step by step and it turned out AMAZING! Can't wait for Halloween. Liked, Commented and most definitely subcribed. I'm hooked.
This looks badass, but even though the budget was short, I would go through all of this just to have it. Sure, it looks cool, but this looks like a lot of work.
For those who are not so much into eletronic stuff, just do the gun without the lights. It's super easy. It's way cooler with the lights, but if you need something just for a costume party or something, just the gun itself will do it. And by the way, if you do it, people wont even know that there was a light version of it and will worship you for being so talented. Trust me.
Hello, the template is not exist anymore. Can you send me a screen shots of the template on email. kris.kaczynski11@gmail.com I hope you read this and help me Thank you !
+Odin Abbott The best part is that I already have one exactly like that lying around in my garage! I'm also following your tips about the sheet styrene and pic pipe. I carved the grip with floral foam
+Levi Coffman Metric 10 milimeters = one centimeter 10 centimeters = one decimeter 10 decimeters = one meter Imperial Just a bunch of measirmeants based on a random persons body parts with no relation to eachother
Why not modify the Metroid arm canon they did? It shouldn't be too hard to add claws to the front and change the body structure to something more flowing.
You know how much Morty is against selling illegal weapons to potentially murderous people, but there's no reason to not make some easy cash when people want some plumbuses
In the process of making one of these and I wana say the price for a normal person even borrowing tools (step bit / soldering iron / saw) is well over 40 bucks. magisculpt $20, Styrene $34, plastic cement $8. It may just be my area but the styrene was near impossible to find. Home Depot has it in huge sheets and they will not cut it, you have to buy the whole sheet. The soldering was easy as my uncle is a master electrician. Cutting the styrene was a ridiculous task I went through about 10 blades and each cut had to be gone over about 6 times (for the thinner board) I think the title should more or less be "DIY Difficulty level out of 10" or something lol Never the less this is a great prop! Odin ♥
Agreed, this involves a lot more cost and expertise than it appears. I get excited to make these builds, then quickly realize I've been duped. At least explain the soldering with some more detail...
The exact flashlight for $1 is at walmart I built it to a tee you guys!! Was defintely a little more expensive but I borrowed a step bit from someone and boom everything fell together nicely. If you want to see a pic, let me know. I'm pretty proud.
You know, those "For Sale" and "Beware of Dog" signs are styrene, and there's a pretty cheap but good plastic cement made by Testors. I'd also recommend getting a knife sharpener so you dont have to keep buying new blades and instead just sharpen them as you go. Not to mention, now you have plenty of styrene for future builds.
+Torbjørn Austad how is a portal gun that just transport you to another end of a room better than a portal gun that takes you to an infinite number of different dimensions?
Brooke-chan umm. A drill is $15 bucks at a thrift store and a soldering iron is around $10. Plus you don't need a table saw you can just use a hacksaw which is like $15. So it's not that expensive and you can use them for furpture projects
Bro for the plasma ball affect you could just use hot glue and molded into the sheep you wanted but I anyway I love your videos and I hope to see more good stuff in the future
I like that he says that the stuff he builds is from HOUSEHOLD ITEMS so I was like great!......but than he said you can buy this blah blah from the store. Hold up..didn't you say house hold items? Anyway later on he does all this crazy electronic stuff and has all these crazy tools! Anyway I LOOOOVVVVEEEEE THIS so don't get me wrong but what I was basically saying is that it's kind of hypercritical. Thumbs up anyway and an extra sub👍
most is stuff you can get at a dollar store or craft store at the mall. Pretty close to household. The wiring is super basic. If you have enough problem solving skills to change a tire you could figure it out. The only crazy thing is the table saw which he admits. I feel like people were looking for something made out of cardboard and coat hangers but if you want something that looks decent you have to kick it up a notch.
Awww. This made me happy then really sad. In high school I used to diy props all the time now that I'm in college I have no time do it and I miss it so much
this is easily one of the best-finished pieces I've seen on this channel. very well done.
To be fair, it's not a very complicated piece to begin with. Still, it does look good.
yeah i agree, that companion crate the other guy did was kinda messy it doesn't look like a pro did it
+radx99 you're right, it is a pretty simple design, but in many ways that's actually harder to do well. With something super fancy you can simplify it a lot and still look good. With a simple design you have to go all out and nail every little bit because there isn't any leeway.
I like that he got away from using a lot of hot glue. That stuff gets all over and makes things look messy. Clean cuts, cement glue and proper bondo blending should be done a lot more on this channel. This set the bar. I hope they don't go in the other direction.
agreed
Now all I need is the Mulan Szechuan chicken nugget dipping sauce and I'll be set for life
You guys know what I'm talkin bout I'm sub in to y'all and y'all don't need to sub back dawg! Idk why I said y'all
binging with babish has a video where he makes the sauce
once I went to mcdonalds drive thru and in my best rick voice said "ill have some sezchuan sauce!" then my friend whimpered "uhh rick there isnt any szechuan sauce on the list..."
Brotherhoodofarandommetal k know how to made it
Or you could get a close estimate by mixing maccas BBQ sauce with sweet and sour
I thought at the beginning this will be simple, then I finished the video
Justin Brown a halo fan I see
IT Is simle...
Nejsem tvuj tata! THIS HAS NOTHING TO DO WITH IT!!!!!!!!!!!!!
You think cardboard, paint, and a green lightbulb. Then you end up with this.
Same
I don't know why, but I really like this guy
Agreed. He is one of the better prop guys on this channel.
Yeh. I like him
Me too.
Him and Vinny are cool.
He's the man
can anyone, like, seriously, make one exactly like this and sell it?
i'll definitely buy it
eupholia how much you paying
Ben Games I assume $14. Or whatever that is in euros.
Tychoootje well. i would buy that.
Ben Games 15 and a half flurbos or 45 schmeckels.
eupholia It's called etsy =P
The new "How its Made" sure looks good
*How they do it (How it is in R&M)
ThatoneMCpro - MLG Videos Almost Every Week lol
make a plumbus
Mobile yes they should do that
CT 7567 He has a portal gun. It wouldn't be hard to find one.
Mobile the responses are the funniest things ever
Mobile I
But you should already have one
now show me how to make a plumbus
Not just any butthole, Mr. PoopyButthole
james dashee You take the fleeflob juice and smear it over the megops
Brendan Eades no, it's the fleet juice
Fleeb*
See the interdimensional cable!
you've gotta flip em off Morty. I told them it means peace among worlds
Isaac Hobbs 1
Isaac Hobbs hi
Um..........I'ma pretend I didn't see that
MORTY SMITH where is eye patch morty
XD LOL
You should make a plumbus! Here are some instructions:
1. You take the dingle bop and smooth it out with a bunch of shleem.
2. Re-purpose the shleem for later batches.
3. Now take the dingle bop and push it through the grumbow.
4. Now rub it against the phleeb. (This is an important step because the phleeb has all of the phleeb juice.)
5. At this point a shlamy shows up and rubs it and spits on it.
6. Now cut the phleeb.
7. You will notice that their are several hizerds in the way.
8. Have the blamphs rub against the chumbles.
9. Now shave away the plubis and the grumbow.
Finally, this leaves you with a regular old plumbus.
Total Cost: about 10 phlerbows
Thats a bit expensive for me. Is there an easier way?
Flurbos*
Lol
Angpug1 ha I love the instructions
Angpug1 thanks for the directions
That was kind of incredible.
Thank you for your kindness. Grandpa wouldn't show me how to build it. You have shown me a great gratitude today. I will never forget it. #JoinEvilMorty
lol
I replicated your DIY Portal Gun step by step and it turned out AMAZING! Can't wait for Halloween. Liked, Commented and most definitely subcribed. I'm hooked.
Forgive my ignorance if this has been already been done but have you considered doing a Meeseeks Box?
Seriously, why would anyone even bother? They're so simple.
I just hit the red button and had my Mr. Meeseeks make me one...
Hopefully your Mr. Meeseeks made you one with a blue button. :P
Not so simple now is it!
Nope. The red button was on my Mr. Fleeseeks box. He made me a Mr. Meeseeks and Meeseeks made the Meeseeks box.
And *that's* the waaaaay the news goes
Uh ohh, somersault jump! Looks like you, uh, looks like, uh, you got me there, Internet Rick.
Mr Meeseeks Box
Wubalubadubdub!! 🙌
+The Rickest Rick are you Earth Rick C-137
HEY I'M MR. MEESEEKS LOOKS AT ME
OOoooo Yeah! Caaan dooo!
The Rickest Rick*Birdman died ;( you can't call him anymore.*
This looks badass, but even though the budget was short, I would go through all of this just to have it. Sure, it looks cool, but this looks like a lot of work.
"Next on, How They Do It"
Plumbus
Khonijn Everyone has a plumbus in their home
Katquinn but do you know what they made it?
How*
They Confics- GURP- ated my p-portal gun, can you bail me out?
conficsated lol
Rick Sanchez why did I read this in ricks voice 😂😂😂😂
Isaiah Luna Probably because Rick wrote it.
G U R P
Rick Sanchez aww Jeez rick y-y-you know i cant do that
For those who are not so much into eletronic stuff, just do the gun without the lights. It's super easy. It's way cooler with the lights, but if you need something just for a costume party or something, just the gun itself will do it. And by the way, if you do it, people wont even know that there was a light version of it and will worship you for being so talented. Trust me.
It has been a difficult mating season for bird person
Please do meseeks box
Cruel Memes It Seems im mr meseeks look at me!!!
Thanks I made a awesome portal gun that I hold when I watch Rick and Morty
Hello, the template is not exist anymore. Can you send me a screen shots of the template on email. kris.kaczynski11@gmail.com
I hope you read this and help me
Thank you !
That was awesome, and I like how you explained how to make it
Perfect timing! I just started making one of these! The idea of using the bubble wand is genius!
+Odin Abbott
The best part is that I already have one exactly like that lying around in my garage! I'm also following your tips about the sheet styrene and pic pipe. I carved the grip with floral foam
+Isaiah Moorehead
I made the button with a water bottle cap
+Odin Abbott
In what store did you manage to find the sheet styrene. I don't know any with a remnant bin
+Odin Abbott
Thanks!
How about a PKE meter? I'm sure you'll nail it! Good build as always, King of Asgard!
Excellent tip about the bubble wands & polyfill! Will try this in the future.
Thats pretty awesome, now how do I make the power armor they used on the purge planet?
Lol
Ill sell you one.
Rick you know you sh-shouldn't do that Rick Rick don't do that ok
Ethanator 520 it's Blips and Chitz
Does anyone even make this DIY Props or you guys just like watching the build?
Just watch :)
Kick von Burg Same!
i make them i made the pipboy the chainsaw machibe gun and the warp scythe
I made a small version of the portal cube
I made the golden snitch as a gift for someone, but other than that just watch ;D
Imagine in 100 years there's gonna be tutorials like this, except for fully operational portal guns
Odin's builds are sooooo good.
Vigor bottles from Bioshock!!!
Yes please
YES
Yes
Lets make this happen folks! We all love Bioshock
yes!
Rain drop, drop top my names Odin Abbott and welcome to DIY Prop Shop
THIS GUY IS SO SMART HE MAKES ME FEEL DUMB!!!!!!!!😂
bluuberiii there is nothing smart about this.
too true
bluuberiii u r dumb
TnT Filmz shut up bully butt
The imperial system is ridiculous. One and 5/16 inch tall
The Imperial system of measurement is far superior to metric. It's intuitive, based on 1 whole or 1 half.
no
+Levi Coffman If you were taught metric first, it would feel more intuitive to you
Plus almost the entire world uses the metric system
+Levi Coffman Metric
10 milimeters = one centimeter
10 centimeters = one decimeter
10 decimeters = one meter
Imperial
Just a bunch of measirmeants based on a random persons body parts with no relation to eachother
I would’ve put a kinda bottom on it and put water dyed green in the tube
Now to do the portal gun from portal
Jessss
yes!
Why not modify the Metroid arm canon they did? It shouldn't be too hard to add claws to the front and change the body structure to something more flowing.
YEAAAAA!
Last time I saw you, you still made Portal 2 Chambers for rage.
Make a plumbus.
I-I got o-one if you want you know
Okay Morty, you tell Rick not to sell an armor, but you're going to sell a plumbus? Jeez, not my man
You know how much Morty is against selling illegal weapons to potentially murderous people, but there's no reason to not make some easy cash when people want some plumbuses
J The Fandom Weaboo
Dude, you don't understand! He's doing what he told Rick not to do! Lmao
*First, take the dinglebop and smooth it out with a bunch of shleem.*
Video: $20 magic skulpt clay
Me: $5 Walmart air-dry modeling clay
I should be able to shoot portals
Oh wait, never mind...
Gravity Breaker Draws lol autolike
is it just me or dose he have the perfect body shape for zoiburg
I forgot how to spell it
ART2G2 zoidberg :v
woop woop woop woop woop!
ART2G2
Why not Zoidberg?
The spelling is bad and you should feel baaaad!
This looks like something they use for cosplay than just a diy
In the process of making one of these and I wana say the price for a normal person even borrowing tools (step bit / soldering iron / saw) is well over 40 bucks. magisculpt $20, Styrene $34, plastic cement $8. It may just be my area but the styrene was near impossible to find. Home Depot has it in huge sheets and they will not cut it, you have to buy the whole sheet. The soldering was easy as my uncle is a master electrician. Cutting the styrene was a ridiculous task I went through about 10 blades and each cut had to be gone over about 6 times (for the thinner board) I think the title should more or less be "DIY Difficulty level out of 10" or something lol
Never the less this is a great prop! Odin ♥
Where did you find the flashlights?? Please help!
Adam Theall I found them at a dollar General (dollar store). They are not exact but they serve the same function.
Agreed, this involves a lot more cost and expertise than it appears. I get excited to make these builds, then quickly realize I've been duped. At least explain the soldering with some more detail...
The exact flashlight for $1 is at walmart
I built it to a tee you guys!!
Was defintely a little more expensive but I borrowed a step bit from someone and boom everything fell together nicely. If you want to see a pic, let me know. I'm pretty proud.
You know, those "For Sale" and "Beware of Dog" signs are styrene, and there's a pretty cheap but good plastic cement made by Testors. I'd also recommend getting a knife sharpener so you dont have to keep buying new blades and instead just sharpen them as you go. Not to mention, now you have plenty of styrene for future builds.
WUBBA LUBBA DUB DUB!!
Grass... Tastes bad!
TheWispSings Ricky Ticky Tavy!
And that's the waaaasaay the news goes
F**k you morty
Uh oh summer Sault jump
Now the Galactic Federation knows how to make one...
When I asked for the portal gun......I meant the one from Portal :(
Rick's portal gun is better anyways
+ianG91910 nope
+Rum Ham I'm Gazorpazorp-Fucking-Field.
+Torbjørn Austad how is a portal gun that just transport you to another end of a room better than a portal gun that takes you to an infinite number of different dimensions?
+Torbjørn Austad Yup
Make the memory gun from gravity falls!!!
yesyesyesyesyes
totally
and the oscar for best idea goes to +Carlos Actosta
yessssss
No
This is the stuff the stuffed animals are stuffed with. ._.
Sandra Mills "hello Darkness, my old friend...."
☹️
So it's really inexpensive to build if you have a workshop with a couple thousand dollars worth of power tools. xD
Brooke-chan the tools used aren't super expensive, they don't really go past $30
Brooke-chan umm. A drill is $15 bucks at a thrift store and a soldering iron is around $10. Plus you don't need a table saw you can just use a hacksaw which is like $15. So it's not that expensive and you can use them for furpture projects
Brooke-chan your so dumb. This would only cost about 45 dollars if you didn't have any of the tools or materials.
Karie Miller actually you're dumb cause u don't even know how to use you're
Flying Tortoise wow. I didn't know misplacing an apostrophe made you dumb.
*IM MR MEESEEKS LOOK AT ME!*
Matty River I
Matty River no, you're bender
Lucas and Marcus FAN Well i'm here because he roped me in too this.
Mushroom Aiden. Well I'm here because he roped me in too this
RedGlow Vitality well I'm here because he roped me in
I need a tiny porta gun for Tiny Rick!
*I am not blasting your build. I am just quoting rick.* "T-t-t-t-this is just poor craftmanship."
Shut up!
Rick Sanchez M-*BUUUURRRRRGH* MAKE ME RICK DIMENSION C-137
I'm C1-39 Rick jackass!!! 😉
Rick Sanchez Well excuuuuuuuuuuuuuuse me!
AND AWAAAAAAAAY
WE GOOOOO
MY NAME IS MR MEESEEKS LOOK AT ME
Wubalubadubdub! 🙌
oooohhh yeeaahh
Caaan do
time to get snifty
Rick Sanchez its wubalubadubdub
Fucc man it didn't work, I can't go to the dimension where somebody loves me
Try remaking it 🙃
I’m stuck in a dimension where everyone is human
@@BOASYDOG try recalibrating it, human technology is so inferior to mine
Make 'Gwendolyn' lol
Please, please do something overwatch related!!!
+Granite lol
That would be great! Mercy's staff? Hanzo's Bow? Anything?
Tracer's booty
+POZOLEDECARAMELITO GG WP
Stop over watch sucks
Loved the video and how innovative you were with some of the parts (bubble wand, whisk, shot glasses). Keep up the good work!
I can't even draw a circle so I'm screwed if I ever try this
why does this guy not have more than 55M subs hes so good
Odin, you are and always will be the man
Please make a Riddler Trophy from the Arkham games!
I will now get lost in the comments
I found you
Gone but not forgotten
why get lost...
when you can get schwifty
+xXBantamCatXx good one, nice cartOo*burp*n refrence i love it when he sais that!
+xXBantamCatXx but i want more...
SHOW US WHAT YOU GOT!
I was so focused on his work that I didn't notice the Rick's clothes he was wearing
Can you do the conference call from borderlands 2. It will make my day
I need to go take a Morty.
Odin best DIY UA-camr ever!!
CAN WE HAVE DIY PROP SHOP EVERY WEEK INSTEAD OF EVERY OTHER WEEK -_-
It take times to do it be patient you spoiled brat....
lool someones butt hurt
make the gun from the brother of stan from gravitty falls
Or just something from gravity falls, cause gravity falls is awesome
+ICH MÖCHTE HIER ETWAS KLARSTELLEN! yeah but that gun is really awensome and i want to make one
+ICH MÖCHTE HIER ETWAS KLARSTELLEN!
the journals....
YESSSSSS!!!!
that was shown for a few moments
That's really a professional portal gun design
can you make 3dmg gear from Attack On Titan?
I love aot and would love to see that
TITAN!!!
Thats hard man
+DvDmasters so?
+DvDmasters it's not really hard
Im mr meesters look at me.
lol
meesters.
Meeseeks is that you?
Rick Sanchez i thought you were in jail you cant talk to meeseeks if you are in separate places if you both dont have phones
look at ricks life behind bars mr meeseeks is there lol
MR, Meeseeks look at me, I'm mister meeseeks!
He’s a genius with his resourcefulness
Anyone find the Mulan McDonald sauce yet?
Xenia maybe in the 9th serie...
Xenia check out Binging with Babish on youtube. He makes it
No joke, McDonalds was giving it out 2 days ago, my friend and I went, but when we got there, it was sold out.
You should Make a plumbus like so he se😄😄
Better quality than any store-bought
Hey, I lost my portal gun and I need yours. Think you could help me out?
Rick Sanchez I have it
Like for pickle rick
Here I'll show you how to make one
1.grab a pickle
2.your done
Big Fan
Rick: I'm a pickle Morty! I'm PICKLE RIIIIIIIICKKKKKKK!
Bro for the plasma ball affect you could just use hot glue and molded into the sheep you wanted but I anyway I love your videos and I hope to see more good stuff in the future
Deleted template file?
This is the universe where Rick gains 100+ lbs. And runs a youtube channel about making props
Love the effort and time you put into this
the best portal gun irl I have seen so far
Can you make the omnitrix from Ben 10 omniverse
Wubba lubba dub dub!!!!!
Meowplayz_YT lol you thought you could get 1k likes copying other guys comment that got 1k likes
Thi- This was way more comp- (burp) licated than i imagined
make vibe's glasses from the flash tv show
arrow.wikia.com/wiki/Vibe_Glasses
yes please!!!!!"
Yes!
Those look super dumb
Sailent Carathras Maybe, but in a kind of cool way. And, honestly, it would be really cool to see them try to make it.
+Sailent Carathras you look super dumb
make a Mr meeseeks Box
Oden Abbott... Like DARRELL ABBOTT??!?!?!?! GIVE THIS MAN A GUITAR
Wubba lubba dub dub
Plumbus or riot
Keep it shwifty
Gotta get schwifty!
Please reupload the template!:)
I like that he says that the stuff he builds is from HOUSEHOLD ITEMS so I was like great!......but than he said you can buy this blah blah from the store. Hold up..didn't you say house hold items? Anyway later on he does all this crazy electronic stuff and has all these crazy tools! Anyway I LOOOOVVVVEEEEE THIS so don't get me wrong but what I was basically saying is that it's kind of hypercritical. Thumbs up anyway and an extra sub👍
ER9 Stopmotions you can use household items. It really depends on if you're a prop maker or a handy man.
Karie Miller true
ER9 Stopmotions hypocritical (!) isnt really the right word here, maybe misleading if you want so
Olive O'Connor thanks I was trying to think of that word at the time but I went with the closest meaning
most is stuff you can get at a dollar store or craft store at the mall. Pretty close to household. The wiring is super basic. If you have enough problem solving skills to change a tire you could figure it out. The only crazy thing is the table saw which he admits. I feel like people were looking for something made out of cardboard and coat hangers but if you want something that looks decent you have to kick it up a notch.
Hmm 🤔 build my own Portal Gun for $40 that kinda looks like it's from
Rick and Morty....OR 💡 buy it on Amazon for 14.99-29.99
That Portal reference xD
I knew there was going to be an aperture science reference
Did anyone else notice he's wearing what rick does?
Alexander Dee wearing what Rick wears not does
No Brainz No wonder your name is no brains.
Dom the Bomb IM ded
Did anyone else notice that if u turn ur phone upside down on the thumbnail it makes a smiley face with ricks unibrow and eyes
More Rick and Morty creations PLZ it love the show
omg, I love this build! All the clever use of various little items! :D
I love how dramatic the video started and then HI IM ODIN
Awww. This made me happy then really sad. In high school I used to diy props all the time now that I'm in college I have no time do it and I miss it so much
That turned out really well. Great job
I support this whole heartedly
I would love to watch you make a large infinity gauntlet.