Let's FREE up some BLOCKS on the POD Go!
Вставка
- Опубліковано 2 гру 2024
- FREE POD Go Tone Secrets PDF Guide HERE:
►►jimmy-cooper.m...
Link to all EXPANSE Packs HERE:
►►www.heyworship...
FREE Helix/HX Tone Secrets PDF Guide HERE:
►►jimmy-cooper.m...
Get your Worship Pads Bundle HERE:
►► www.heyworship...
Get your 2022 Digital Worship Planner HERE:
►► www.heyworship...
Here's the VIDEO where I found the idea on the channel HELIX for Worship:
►► • HOW TO GET MORE BLOCKS...
OTHER SWEET DEALS:
►► JET Pedals Store: jetpedals.com/...
Use code HEYWORSHIPLEADER to save 10% at checkout!
Church Sound Made Simple (Course)
►► churchsoundmad...
X32 Mastery
►► x32.church/?ref...
►► Get Sunday Keys 2022 Edition HERE:
sundaysounds.c...
►► Westminster Effects Pedals:
www.westminste...
►► Let's hang out:
www.heyworship...
WATCH NEXT:
○ HX Stomp Playlist: • HX Stomp Mini Board Bu...
○ JET Pedals Playlist: / watch
v=C5kmi2c96Wo&list=PLKBqjDj5XyB6F7m2rcaKaVTN3pWA-Wq18
○ Digital Planning for Worship Leaders: • Digital Planning for W...
○ Worship Guitar Essentials Playlist: • How To Dial In Your OV...
○ Shepherd Your Congregtaion Playlist: • Our First Attempt At W...
○ Gear Up For The Weekend Playlist: • Worship Leader Vlog | ...
ALL MY GEAR:
www.heyworship...
If you're in the market to purchase some gear, use these links to support this channel at no extra cost to you! Thank you so much for your support!
COME SAY HI!
Instagram: / heyworshipleader
Facebook: / heyworshipleader
DISCLAIMER: Links might be affiliate links which help support this channel. If you purchase a product with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting HeyWorshipLeader.com so I can continue to provide you with free content each week!
And make sure you subscribe to my channel! / @heyworshipleader
Check out the EXPANSE Preset pack for all the HELIX / HX / and POD Go devices! Pay once, get updates for life! Check it out here: www.heyworshipleader.com/helix-page
Still working in Pod 2.01, 03/27/2024. Many thanks.
you will end up burning your dsp overuse...
Working like a charm in 04/01/2024. But I found in the comment section that if you replace the number for an x (example: "block2" for "blockx"), this hack works even better and you can also delete the volume pedal leaving all the slots available. Awesome! Cheers from Brazil!
Thanks for sharing!
You will end up burning out your dsp overuse... by forcing it to work for what it is not prepared for...
@MniaTk how do you know?
@@3frenchtoast3 simple logic of operation of electronic components?
@@3frenchtoast3 Overclock a computer processor and you will see how the useful life decreases dramatically, or stops working altogether. This forces the DSP to work on the floor for which it is designed by engineers.
Do you think that the creator of this video knows more than the electronic engineers who work for Yamaha?
Thank you for this. My favorite patch was just missing one last effect: tremolo. It's not a DSP-hungry effect, but it's a key sound for me, and I was out of blocks. With this jailbreak, I was able to add it in. Works great!
I realize you posted this awhile ago but just in case you never tried it and was curious, I actually tested pulling out both the EQ and the volume pedal and it actually worked! I did not try pulling out the amp and cab as this is still a need for me but I have a feeling it would work as well. I freed up 8 blocks! We're of course still limited to the Pod Go's DSP but it did give me full flexibility to try more things. Thank you so much for this video and all the video's you've done on the Pod Go and Helix, you've been my call a friend when trying to quickly get ready for Sunday service. I'd love to see more Helix video's as I am going that direction very soon. God Bless!
That's awesome...yeah I tried pulling out different blocks as well with success. I also tried puling out everything with limited success. It would work and load, but then it began to bug out
Excited for your course with the POD GO. Often times people do courses on the HX time and helix, it seems like the pod go often forgotten so thank you for making that!
Yes! Still working on it!
Works in 8/2024, thanks so much !!!!
Thanks! and yep...still works for me!
it isnt working for me and im on the latest firmware
Couple of things. Yes this still works as of 9/3/24. I did a few things; you can yank EVERYTHING and have a blank preset, but if you do this, you won’t be able to add a cab or amp back into that preset. 2nd if you have a preset built but you want to remove say the wah to make room for something else, you can. I pulled the wah out of an existing preset and replaced it, no issue.
This really should be a feature for the pod go as an optional structure for presets. Yes you are still limited by DSP but this has made a WORLD of difference for me and how I use the pod go.
My same experience. Thanks for sharing!!
@@HeyWorshipLeader no thank you!! I was able to understand and follow the logic of your steps from this video. Now I have presets specifically for going direct into the board w/ model amps and ones for going into an amp using solely as a multi fx stomp box (which is my preferred method of use)
Does that mean you can have 10 blank blocks?
Game Changer! Just tried and worked like a charm. Took an existing preset of mine and dumped the wah. Thanks bro.
Glad it helped!
Now I definitely want to get a POD Go!
so cool
This is awesome! Hope Line 6 doesn't "fix" this in an update
They have previously indicated that they don't plan to. They also don't actively support it, either.
I know!
I haven't seen where they have addressed it...do you have a link?
@@HeyWorshipLeader They are basically taking a neutral stance on it. They aren't promising that an update won't kill the ability to do this, but they also aren't going to go out of their way to prevent it. And no customer service support, which is completely understandable.
I really hope not..if not i Will not update...this fix is crucial for me
I needed to remove the amp and so it didn’t interfere with my KSR Ceres or my KSRPA50, I also needed to figure out a detailed way to utilize my pod go more. Thanks man!
That’s awesome man glad to help
Code is close enough. That stuff is called JSON, JavaScript Object Notation, and it's not quite code, but close enough. It's a data file format, a very nice easy to alter and share one. It's awesome that you can tweak these externally. Generally JSON generated by software written in C++ like the PodGoEdit program, would write out the JSON items in no particular understandable order, that is, its not important what order things in { "this": 1, "that":, ... } form are represented in.
dude, thanks a loooooooot!!!!! it works with EQ for me. This change my life, really. greetings from chile
Hmmm, I was trying to sell mine, felt like I needed just one more block to do some of the more complicated things I wanted to do. Now I'm keeping it for sure.
that's great
Something else to keep in mind is getting something like a midi controller and send messages to the midi and assign it to an effect. I’m going to be getting the bridge 6 and pod go and that’s probably what I’ll do even tho that’s not really what the midi it’s for, it’s super useful for someone who is on a budget like me
Thank you so much for this!! I was so dissapointed with The pod go.and i really needed that extra block..very greatfull! Thank You so much and best regards from Chile, southamerica
You are so welcome!
Thanks, Jimmy. Good refresher on the hack.
you bet!
Awesome video! I saw this before getting the Line 6 Pod Go and it was one of the reasons why I got the Pod Go.
that's awesome!
Glad I could help!
Cool, it works. I got rid of the EQ also using the same hack. Thanks
awesome!
Very excited for this video!
game changer for sure
YOU ARE THE MAN. Great video!
I appreciate that!
It seems like this modification isnt applicable with the update of the moment. I did the same modifications as you in the text code to remove the wah and the fx loop but when I import it back in the podgo its showing an error and it wont import itself in. 😢
@Hey Worship Leader this worked perfectly. I'm so impressed I'm buying the Expanse Pack. Thank you for sharing.
Great to hear!
I am a long time Helix, HX Effects and (now) Kemper user. Just ordered a Pod Go to see what it can really do and to take with me on my travels as a practice unit. I will soon try out your packs :-) Thanks for your good work!
I love doing it man...glad to help
Would be interested to hear what you think once you get a PodGo. Moving DOWN to podGo, I wonder if you'll be a bit "underwhelmed" at the entry level capabilities, compared to a full Helix.
@@WarrenPostma Yeah...once you have the HELIX it's hard to go POD Go...although I do grab it pretty often because it's so light
@@WarrenPostma at this price point, I think my expectations are in check. I am not worried about the much more limited functionality, this thing weighs 1/3 of a Helix Floor and that is why it appeals to me. If the modeling gives me a decent sound, I will be fine :-)
How is it? A lot better I bet with the 2.01 update @@patgiff101055
Thank you been wondering how to get more room
Glad I could help
I tried this and no luck it just goes poof when I import it? Im using the newest firmware? Does this still work? with the latest firmware? ty @@HeyWorshipLeader
THANK. YOU.
Thank Mr.Unbox Therapy
Haha...not the first time I've heard that! lol
I applied the same method on all blocks & managed to free up all 10 blocks
but their are limitations w dsp
Good to know!
Well, THANK YOU!
glad to help
Thanks man this is really helpful 😀
Glad to help
good hack, definitely going to try it but I'm going to try to keep the wah and delete the volume block.
Nice!
OMG thank you!!! I did it :D
hi cool hack!! can you ever switch back to the factory settings without the hack?
Does this affect the other pataches? or just the one you hack?
Can you do a patch thats quarter, eight and ping pong
THANK YOU!!!
I was about to ask if this affected the Pod Go globally. But I just saw where you offered a preset with it already done. So my question was answered. I think maybe this might be useful for a four cable method in a live situation. It's too bad that you can't do the same with the amp and speaker blocks, if you're not going to use them with the four cable method.
And it still works after the 1.4 update!
@@HeyWorshipLeader you can't add an extra two amp blocks so you can have a wet dry wet rig?
@@joethrelfall6370 I wouldn't let me
you got your self a new subscriber! would you do a video about changing the names of the amps and effects to the real names please!!!
I threw the Zoom MS70-CDR in the effects loop, thereby adding 6 blocks.
I don't know why, but in my case I can't use the extra 6th
Done this on my pod and even more , only amp and cab block left, assigned effects to all blocks it's working ok but try to move ,,new free blocks,, with assigned effect to different positions, it's start sounds weird
Hi, in the unlikely event that this “re-coding” ends up doing some damage, will a factory reset fix everything. Thanks for the super simple explanation btw.
I read somewhere yes it would.
@@frankiebananas2784 K thanks.
I think so...but good news is...it hasn't seemed to cause any problems yet. I think the problem might would/could come later with a big update and might erase the preset...but we'll have to wait and see
@@HeyWorshipLeader Got it thanks.
There is zero risk here. You are not changing code, you are changing data (JSON)... Data for one preset. It is impossible for this to affect anything else in the system.
Pod go just became op
for real!
About to buy my first Pod Go but seeing these hacks don't work with the new update, is this true that you know of? Thanks
Still works on my POD Go and it’s updated!
@@HeyWorshipLeader Awesome,thanks for the reply. Great videos and looking forward to your patches!
Just bought the Expanse Pack - it has the code set correct?
yes! the Jailbreak is in there and ready to go! Let me know if you need help. But email me so I don't miss if you reach out: jimmy@heyworshipleader.com
Don't have a POD Go but interested in this. Kewl!
it's def exciting
It is game changer bro! :D
I tried this on my windows 10 laptop
Saves in notepad , word pad and word but wasn’t able to drag it back to pod go edit
Do I need an specific app?
I want to get rid of the speaker simulator as well I took it out the same way that I did the The effects loop but no sound is coming out have any tricks for that?
Hmmm. not sure. I've had issues with taking out more than what's in this video. You can use the amp out. Go to global settings, select "Amp Out Source" and toggle "Pre Cab/IR" I know that doesn't free up a block but will allow you to use an external speaker
@@HeyWorshipLeader Yeah I was hoping to free up another block I already turned off the cab sim. I wish they were all blank and you just had a choice to put whatever you want I see there's EQ that's kind of stuck there I can't seem to get rid of.. anyway cool vids thanks
Hey worship leader, I wanted to let you know, I was able to free up all of the slots except for the volume pedal. So 9 empty slots! Yest it works with EQ, Amps, caps. The only thing it does not work block 1 (pedal).
Anyone can copy paste this starting on line 41 and ending right before the "input"
"block1" : {
"@position" : 1
},
"block2" : {
"@position" : 2
},
"block3" : {
"@position" : 3
},
"block4" : {
"@position" : 4
},
"block5" : {
"@position" : 5
},
"block6" : {
"@position" : 6
},
"block7" : {
"@position" : 7
},
"block8" : {
"@position" : 8
},
"block9" : {
"@position" : 9
},
Writing back to say I don't recommend this. If you use too much DSP it'll basically crash. The only way to get it working again is to replace that preset with another one.
Hello!
Is it possible to make 2 amplifiers and switch them on alternately?
No...the preset won't handle that much DSP
@@HeyWorshipLeader 😢
Can you only do this once? I tried to edit another preset…same process, but now when I go to drag it back in, it has a little white slash.
Does this just jailbreak that particular preset and leave the others alone?
Just that preset leaving the others alone
Can you remove other blocks to clear up dsp instead of Wah. Which I use frequently
Yes! I tried again yesterday and removed everything except the amp and cab!
And I can't tell you how many times and forums where I've said, "I understand it's not going to give me more DSP, I just never use a Wah pedal for worship so I'd like another option". #fixed
haha! For real
Thanks for sharing. This is great. I have the HX expanse pack...do I need to purchase the POD GO one separately to get the PG jailbreak?
Hey man...I'll email you :)
I just tried doing this and unfortunately it’s not letting me load the preset. Has something changed since an update
Did you make it yourself, or get it from the EXPANSE Pack?
Would deleting the fx loop be a bad idea if you are using a Catalyst like I am? Does it only effect the present you copied the jailbreak into?
It only effects that one preset...so you'll be good to go
If it's this simple, I wonder why Line 6 don't offer it as an update. Seems like a no brainer. I know the WT guys mention their annoyance with the permanent wah, etc and Frank from Line 6 is normally pretty responsive to them.
Yeah, I'm not sure
If want to do this with the amp and cab in order to add more fx, the hack will work too?
I have not successfully removed the amp and cab and had it work properly...it glitches when I do it
I followed the instructions even using Notepad++ amd it won't drag and drop (or import). Sigh.
How do you get rid of the eq in every patch.. Im stumped I delete it but it remains
I kept the EQ in my patches. I made another Jailbreak 2 that gets rid of everything except the amp and cab and it's glitchy and won't save right and the volume gets low
why do line6 put a few space on pod go?
I'd love to ditch the Amp & Cab blocks as an option. I just want effects and rarely use the amps.
I remember reading somewhere that the PodGo can only take 2 time based / modulation blocks per preset, but I see you demonstrated a preset with 4 (chorus, delay and 2 reverb). Are you only able to have 2 of those blocks turned on at a time, or do you think that 2 block limit only applies if you only have 4 customisable blocks total?
I’ve never read that before. The only limitation I know about is DSP limitations. But if they are in the preset then you can use them all at the same time. If the DSP is out it won’t even let you put it in the block
well watching this video saved me the extra 1300 bucks a helix costs!
woo hoo! nice...glad to help
Great video! I just bought the Pod Go and needing to do some studying on this. Looking forward to watching more of your vids and hopefully learning this great unit!
Welcome aboard!
Is it OK to remove the volume pedal block as well?
I've heard that other people have had success
if i remove an effect block and then save the preset, could the pod go get system bugs?
I do that all the time with no issues
I have a challenge for you.
Make a Jailbreak preset and use a 2 button foot switch to add more functionality of the extra fx
Set up buttons 7/8 😊 with a Jailbreak preset. No one else seems to be talking about the 7/8 function
I think the 4 pedal limit is ONLY because there's only 4 buttons and accessing them means adding more buttons
Hey 👋
is that a reverend double agent?
It's called the Gil Parris Natural...I wanted a double agent for years but this thing is amazing.
@@HeyWorshipLeader really cool! It looks really identical to my double agent
woah!!
Does this work with v.1.4 update?
Yes!
I understand it does not work with 1.4? Tried it myself without succes
@@jaspersonneveldt3402 I haven't tried yet making a new jailbreak preset, but the one from this video (and in the EXPANSE Pack) still works on my POD Go!
@@jaspersonneveldt3402 I just tried it with 1.4 - fail. The block I'm trying to free shows as 'none' on the PodGo edit, but there's no option available to add another effect, e.g. I edited a 'New Preset', removed the FX loop and the Wah using this method, saved the .pgp file, dragged into the edit window - the newly named preset appears with the loop and Wah showing 'none', but there's no way to add any effect into the now empty block. Disappointing!
My interest is peaked 👀
All I got to say is that I’m pumped!!
Enjoyed Ben Craven’s earlier video then.
I think that's the guy, the guy I watched, watched...haha
If I would have known this before I got my stomp, it may have been enough for me
I bet
Dude this is amazing! I have been making patches per worship song and using snapshots as the V/C/B format, but I am considering using this method so that I can use one static pedalboard set up per preset and use snapshots for the songs instead, eliminating that pesky "gap" between patch changes.
Very cool! FYI: "Jailbreaking" is an Apple hacking term. You're just hacking the pod go.
Clickbait. Don't really blame him. Just tryna get more views.
You probably know way more than I do about it...but when I researched I found phrases that said it originated with iPhone but includes more than that now.
"The term jailbreaking is most often used in relation to the iPhone: it is considered the most ‘locked down’ mobile device currently on sale."
"Since the term first appeared, jailbreaking has also been used to refer to adapting the code on other devices, from phones to games consoles."
This doesnt work anymore 😭😭
Nvm i left the little brackets at the end of each code section 🤦🏻♂️
Why don't you just copy and paste two more of the empty pedal sections and load it
You will end up burning out your dsp overuse... by forcing it to work for what it is not prepared for...
You def have to watch DSp...but that happens anyways as things are greyed out, you can't use them. Still works pretty well though if you know the tricks to save DSP!
jesus would be angry
haha...nope
You cant edit presets from the pod go like a normal pedal, normaly freeze and you have to turnit off and on again if you do this.
Appears a graphic bug.
So.... carefull everyone..
I haven't seen that but good word
@@HeyWorshipLeader Sorry about my english.. I dont know how to explain it better :( . I got this since 3 month ago and i did this to unlock everything and using it like a modulation pedal to enter into the loop effects. If you put too much delay's pedals (to give you an example) can crash easyest. Its like have a roof to proces that you cant exeed. Hope you understand me... :P
I will never understand why people are so loyal to Line6. They have horrible customer service and you have to hack their products in order to use them properly. There are SO many more products out there that are so much better and so much easier to use and won't cost you any more than what you pay for this garbage. There's a reason why as soon as you buy these at retail price the value instantly drops by $200-300. They just aren't good.