Excellent video, thank you! My alternator wouldn't charge and I had a few other quirky issues I think related to the PCM. I got the same part # ECU out of a wreck and followed your video with my MK808. It runs like it should now.
Thank you very helpful I have a 2011 Jeep liberty do to alternator the ecu got burn i replace alternator and used ecu I rewrite the vin like you said and now everything working fine, very easy procedure thank you again 👍
Que tal crees que pueda aser el mismo proceso pero con la misma computadora ya que mi problema fue una mala programacion no fue por que fallara la grand cherokee 2011 estaba funcionando la lleve a que hicieran otra llave y me lo desprogramó
So the PCM is just plug and play? (other than the vin change) Did you have to program the IMMO too? Also, can this be done on a used computer? Or does it have to be new??
Did the vin rewrite but wouldn't start after light kept blinking so even reprogram the key to the new computer with the rewritten vin an still wouldn't start@@AutomotiveCircuitSolutions
Yes that about all that waste of money took can do is a relearn I can do the same thing with a 25 dollar to and a vin fee of 20 bucks per car, don't waste money on glorified code readers
Could you program it with a snap on scan tool I have a 06 ecu to go in a 08 jeep commander because I'm using a 06 engine which has a diffrent egr valve I believe
Not that I'm aware of. I have the model just below this and it wouldn't do it. There's an app out there for your phone called PIN PULL or CHRYSLER PIN PULL that's fairly cheap to use $14-25 I think, but I'm not a fan of apps / permissions, so I found a local mobile key / fob guy on Marketplace after the local dealers refused to give me my own code like they apparently used to because they want the money from programming an OEM only fob that they want to sell you. (No thanks) The local guy charged me like $25 each to pull PINS from a couple of my '08 Jeeps. I'd rather support him that dealerships that feel like they have you under a barrel.
THE METHOD WAS DONE WRONG I JUST DON'T UNDERSTAND IT WORKED CHANGING THE ORIGINAL WITH THE NEW ONE,THE RIGHT WAY ITS GOING IN TO SPECIAL FUNCTION AND CHANGE THE VIN ONCE YOU HAVE WRITE THE RIGHT VIN IT WILL ASK YOU IF THIS ITS CORECT YOU PRESS YES,AND THEM THIS WILL BE CHANGED OUT.
I have a 2005 Jeep Liberty that has the code p0888. I don’t believe it has a faulty tmc/pcm because the Jeep drive fine. No issues shifting gears,etc. I opened up the tmc box and it looks clean. I reset the code and it stayed off until the vehicle shifted gears and came back on. Any advice? I don’t believe it is a faulty tmc. Anyway to test it or test the wires?
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Excellent video, thank you! My alternator wouldn't charge and I had a few other quirky issues I think related to the PCM. I got the same part # ECU out of a wreck and followed your video with my MK808. It runs like it should now.
This video perfectly helped me install a new PCM. Now the TCM is having issues with the new PCM but at least it runs now. If only in 2nd gear.
Best way to fix any chrysler product is to sell it. It’s cheaper too.
Thank you very helpful I have a 2011 Jeep liberty do to alternator the ecu got burn i replace alternator and used ecu I rewrite the vin like you said and now everything working fine, very easy procedure thank you again 👍
Nice work!
extremely good video Automotive Circuit Solutions. I killed that thumbs up on your video. Keep on up the first-rate work.
Very nice thank you for your knowledge and support
Nice. Any other way to do it without the $2000+ tool?
Pay someone that has one to do it
You can do this procedure with almost any scanner on the market, not necessary a $2000+ one
Que tal crees que pueda aser el mismo proceso pero con la misma computadora ya que mi problema fue una mala programacion no fue por que fallara la grand cherokee 2011 estaba funcionando la lleve a que hicieran otra llave y me lo desprogramó
this is 2012 jeep liberty pcm easy to do can you show us how to program a new or used pcm on a 2018 and up Pacifica or 2019 2020 dodge caravan pcm?
Same problem on my 2011 liberty. Is there an install video by chance?
Hi
If I program original ECU in car with different vin# will the car start?
Thank you bro much help
With a used pcm does the model numbers need to match or just change the vin?
So you said that if i change pcm with same p/n i dont need reprogram but if i change pcm with different p/n i need reprogram ??
Is that programming ? 🤔 . I guess this is changing the vin only . Programming requires copying data from old pcm and installing it to the new one
Nice job thank you to show how to program the pcm I have a problem with my 07 Jeep Grand Cherokee 3.7 so I get a used one and program that will work??
Which autel do u use to do this job?
Where did you get the vin number from ?
The car.?
can i use a 2005 jeep grand cherokee 3.7 ecm and reprogram it to run 2005 jeep grand cherokee 5.7 hemi?
Can this work for a 2015 charger ?
can i use a regular snap on solus edge scanner to program it?
also my jeep is 2008 liberty
So the PCM is just plug and play? (other than the vin change) Did you have to program the IMMO too?
Also, can this be done on a used computer? Or does it have to be new??
As long as you match the part # then the VIN change is all that is needed for the vehicle to start.
Did the vin rewrite but wouldn't start after light kept blinking so even reprogram the key to the new computer with the rewritten vin an still wouldn't start@@AutomotiveCircuitSolutions
Does it work on any vehicle
Which Autel Boxes have the capability of correcting VINs in PCM to match up with vehicle after replacement ?
From personal experience I know the maxisys pro and elite series both work to do VIN relearn. There may be other model as well.
Yes that about all that waste of money took can do is a relearn I can do the same thing with a 25 dollar to and a vin fee of 20 bucks per car, don't waste money on glorified code readers
Nice and simple :))
I have 2022 jeep compass no engine computer in it
I got used one for 2022 compass
How I can reprogram it
Gotta be a unlock ecm that’s can be programmed
Did you need a PIN number?
No PIN needed on these.
Could you program it with a snap on scan tool I have a 06 ecu to go in a 08 jeep commander because I'm using a 06 engine which has a diffrent egr valve I believe
You shouldn't have a problem doing this procedure with a descent snap on scan tool. We do recommend replacing with an ecu with the same part #.
Can you get the secret 4 digits pincode with that tool?
Not that I'm aware of. I have the model just below this and it wouldn't do it. There's an app out there for your phone called PIN PULL or CHRYSLER PIN PULL that's fairly cheap to use $14-25 I think, but I'm not a fan of apps / permissions, so I found a local mobile key / fob guy on Marketplace after the local dealers refused to give me my own code like they apparently used to because they want the money from programming an OEM only fob that they want to sell you. (No thanks) The local guy charged me like $25 each to pull PINS from a couple of my '08 Jeeps. I'd rather support him that dealerships that feel like they have you under a barrel.
Is this a used ecm?
Yes
i don`t have 3k for Autel max
THE METHOD WAS DONE WRONG I JUST DON'T UNDERSTAND IT WORKED CHANGING THE ORIGINAL WITH THE NEW ONE,THE RIGHT WAY ITS GOING IN TO SPECIAL FUNCTION AND CHANGE THE VIN ONCE YOU HAVE WRITE THE RIGHT VIN IT WILL ASK YOU IF THIS ITS CORECT YOU PRESS YES,AND THEM THIS WILL BE CHANGED OUT.
I have a 2005 Jeep Liberty that has the code p0888. I don’t believe it has a faulty tmc/pcm because the Jeep drive fine. No issues shifting gears,etc. I opened up the tmc box and it looks clean. I reset the code and it stayed off until the vehicle shifted gears and came back on. Any advice? I don’t believe it is a faulty tmc. Anyway to test it or test the wires?
Can you swap and reprogram a pcm for Jeep liberty
We can.
Your using a machine that almost nobody can afford
not his fault you are trying to be cheap. besides, this is for people who have the tool and need help
yes my sentiment excatly
🤣 its also one of the cheaper options on the market....gotta pay to play
What would you suggest he use? An etch-a-sketch pro?
@@DakotaRaymond1999 exactly
I call bullshit why is there a time lapse
Also jscan for jeep does wonders for a fraction
You are right, there is a time cut off two hours DCCTOOLS unlocking permissions by dealers robber
How to fix a Jeep Liberty
Step one: Don't get a Jeep Liberty
Showing what? Talking nonsense, even can’t explain basic things about the problem
This is not programming this coding lol
Id love to find out more about finding the right equipment to reprogram Dodge, Jeep Chrysler vehicles. What do you know about reprogramming?
Absolutely nonsense video
Please clarify? Seems like this video has helped a lot of people based on the comments.