My Strange 4th Axis CNC // 3D printed
Вставка
- Опубліковано 4 бер 2022
- I hope you have enjoyed my dedicated 4th axis CNC project. I wanted the opportunity to share most aspects of the build, however I just couldn't fit everything into one video. I really love this machine and great to finally be able to mill rotary projects.
Here are my files on Thangs if you want to check out...
social.thangs.com/m/54430
////////////// Music Credits ///////////////
Credit from www.epidemicsound.com
www.epidemicsound.com/track/E...
www.epidemicsound.com/track/4...
www.epidemicsound.com/track/p...
www.epidemicsound.com/track/u...
www.epidemicsound.com/track/k...
Music also from the UA-cam music library - Навчання та стиль
Thanks for posting. 4th axis work is tons of fun for me. Even better results with 5 axes but the affordable software is lacking of course. Some software like VCarve allows you to adjust the cutting direction between 0 and 90 degrees to the orientation of the piece.
Hey Myles that is the Coolest enclosure build I've seen!
Thanks Don 😁😁
Really really impressed. Well done
Thanks Warren!! 👍👍😁
Awesome job man. Love it! Great video too, I love the detail you go into. I agree, it's so hard to film and get stuff done at the same time. You wish you could capture it all but its just not practical.
I appreciate your kindness! Thanks @Peacemaker Motion 😁
You are a god m8 .. great job !!
Thanks Naif 👍👍
Cool build! I'd say that the strangest thing with it is that it is not actually a 4 Axis CNC ;) Its a a lathe with a 2 axis turret and rotating tool ;)
Yes you are correct 👍 it’s really a 3xis machine… however it has been so fun experimenting!!
cool machine !! really enjoyed watching it peck that wood to smithereens
Great stuff!
You mentioned these connectors you used in the wiring. I think you said they were used in aviation? This is new to me. Could you share a bit more about them?
Thanks for your question. These are secure plugs and come in various pin amounts. I use typically use the GX20 4pin versions for my steppers. They are great to use with shielded cabling through to elec case body. They can be purchased in many online shops, however I purchase through AliExpress. I’ve heard them called other names, so you might need to see who stocks these near you. They can be fussy to wire the first one, although with plenty of flux they can be very secure.
@@NEWTechCreative I googled that info so now I know what you are referring to. Thanks a bunch!
I've been thinking about making a mount and run water thru it?. So water coooled?.
Sounds great!! Keep me posted 😁 I would love to see progress. Tag my Instagram #newtechcreative
This looks awesome, I will be starting this project soon! Did you ever have a problem with the A-axis rotating too many times and needing to return to the "home" position while in the middle of a program? I run a large CNC mill with a rotary axis for my day job and you can only rotate it so many times before it needs to return to the "home" position.
Thanks for your comment Zach. No I haven’t run into this issue yet! Are you using mach 3? Your machine might be set to a limit, or your cam software might be set to a limit to ensure to limit the runout over too many rotations. I can’t see this being a massive issue, however adding this in would increase the machine time.
@@NEWTechCreative Yeah the machine has a hard limit of 200 rotations before it needs to return home. Its just a limit the machine builder has. Thanks though!
Hey, amazing build, quick question what were the percentage infill did you use , especially for the main core?
Thanks for your comment Hollee! I was aiming for around 60% for rigidity and took a day or two to print!! It’s best to invest in more infill than less. 😁👍👍
@@NEWTechCreative I went with 40% since I'll be using it with a Dewalt 611 and only for wood and pvc. Going for a belt driven with a grbl cnc.
You must keep me updated with how the build goes. Feel free to email me or tag me on Instagram. Sorry I haven’t provided much build info, however happy to guide if you get stuck. Enjoy 😊
Hi. Great job, my compliments. Just to understand well, you are using the X axis (instead of Y axis for F360 post processor compatibility) for left and right movements, the Z axis for up and down movements but the A axis is for what ? Is it a slave axis for X or Z ?? ps: sorry for my bad English
Thanks for your comment @IceCreams62 . The A axis is for the rotary/turning axis . This works on a 360 degree motion and reads degree rather then travel distance. This motor turns the material. I hope that makes sense 😁
@@NEWTechCreative Me stupid stupid. I completely forgot the rotary axis management :-(. Thanks a lot for the clarification.
No problems 😊
I probably missed it. What software where you using?
I have Fusion 360 but I think without extensions I can’t use the 4th axis the way you showed here?
Yes I’m using fusion 360 to create the gcode. You will need to purchase the 4th axis add on if you only have a hobby license. Then I’m using mach3 software to control my 4th axis. 👍
@@NEWTechCreative i bought the yearly subscription but I don't own the extension for CAM. Have to look for other CAM software the extension is too expensive for hobby use.
do you think i can build a 4th axis for mpcnc (which is 3d printed )?do you think it will work?
Great question! I have seen other smaller 3D printed 4th axis add-ons for the MPCNC! You should definitely check it out!!
what u have here is a CNC lathe with live tooling...not a "4th axis cnc project", you should be able to call this a turning center but dont let this detract from this being an awesome project none the less
Thanks for your comment! Yes you are correct here 👍 thanks for your support 😁
do we have to precut the stock before curving by 4 th axis cnc?
I would remove as much material as you can! It will make it far quicker to shape 🤩