Thank you, I used this guide to enable sport transmission on an F32, it worked, but I additionally flashed ECUs specified by a coding cheatsheet for F30. LC is active now and the car shifts faster.
Good explanation. Thanks for sharing this Video. My Launcherpro has unfortunately no CheatSheet build in. I was not able to code that easy as you did it in your video. Thumbs up 👍
Hi, I added the steering wheel with pedals, and connected the wires from the szl to the bdc body that were missing for the pedals, can you tell me which ecu I need to code for the pedals to work on the steering wheel,and sport transmition after I added the 2tb VO? Car is G30. Thanks
I did this coding, but the bdc_body module does not appear on my car. can it be fem body? Also, DS appears on the board and not S1. what else should be coded to appear S1 in sport mode?
@@cristidragusin5686 I’m guessing your mini is a r55 ? These have footwell modules fem body . To have sport 1 etc you need to have a sport button or driving modes button. If you get stuck there are plenty of people that can remote code.
it doesn't work with icm coding either. if anyone knows what needs to be done to change the display from DS to S1, S2... please help me. The car is a Bmw F31 318dA
Thank you, I used this guide to enable sport transmission on an F32, it worked, but I additionally flashed ECUs specified by a coding cheatsheet for F30. LC is active now and the car shifts faster.
Good explanation. Thanks for sharing this Video. My Launcherpro has unfortunately no CheatSheet build in. I was not able to code that easy as you did it in your video.
Thumbs up 👍
Very good video.Thanks.Only when you present something just show before and after.Just for referance.
How could we make sure which ECU should be coded after VO change? Is there some overview/"calculation" possible in E-SYS for this?
Hello , can you code my transmission from a distance with teamviewer?
Hi, I added the steering wheel with pedals, and connected the wires from the szl to the bdc body that were missing for the pedals, can you tell me which ecu I need to code for the pedals to work on the steering wheel,and sport transmition after I added the 2tb VO? Car is G30. Thanks
Hey, did the retrofit work?
你好 可以知道你的联系方式吗
If i don't have paddles shifter, do i have to code the BDC Body module?
Thanks for your answer
I would flash as per vid then go into bdc and deactivate paddle shifters if you don’t have them
I did this coding, but the bdc_body module does not appear on my car. can it be fem body? Also, DS appears on the board and not S1. what else should be coded to appear S1 in sport mode?
@@cristidragusin5686 I’m guessing your mini is a r55 ? These have footwell modules fem body . To have sport 1 etc you need to have a sport button or driving modes button. If you get stuck there are plenty of people that can remote code.
Sorry, my car is BMW F31 2013. I have driving modes button. I guess i have to code icm module
it doesn't work with icm coding either. if anyone knows what needs to be done to change the display from DS to S1, S2... please help me. The car is a Bmw F31 318dA