Poor Christie, having to stand out there and film you for two days in the sun and heat and poison ivy blowing around. What a great wife you have. Very interesting test. I appreciate your input.
Tim, what I find interesting on this project is the old farmer’s always told me that when the outside rounds of a field were done the field was 1/4 way done. Even with the odd shape you mowed that math of 1.5hrs to do outside rounds would put you at 6hrs for the whole property. Those old farmers sure did always know what they were talking about.
My little blue 94 Ford 1320 bought new in 94, yup 30 years in this seat, 5' cuts 1 acre per hour with ease, keeping pto at 540 burns about 3 quarts per acre/hour. in heavy grass 2 quarts in light duty.
we had a flail chopper in ohio we used to chop oats or grass to feed for silage, then we took the upper off and put cap on to chop corn stalks and it worked well for brush
For cleaning off the grille, I have a small battery powered workshop blower that is just the thing for getting all the grass seeds and fluff off the tractor and give the thing a quick clean when I'm done. Saves bringing the seeds back to the house yard and the shed..
I used to mow an R/C model airplane field with a Ford 8N and flail mower of equal age. No rocks, no brush, and it was set low. Did a finish mower quality cut. I use a 48” Everything Attachments HD rotary on my 1025R, but in addition to an old pasture now mostly just a dog play area I mow trails through brush lots and paths through woods. LOTS of rocks, roots and occasional small fallen branches and dogwood/milliflori rose.
well, i have ten acres and about half of it is mowable. I started out cutting it with my 1025. did a great job. was slow though. then I got a 9 series zero turn and cut my time in half.
This was a fun informative video thanks. I have been watching videos here for a long time and I seem to recall back years ago when Tim would have thought $100 an hour for mowing was a good rate. The wealthier you get the smaller $100 looks.
No, that is incorrect. We have a complete video attempting to help folks set prices. In general, $100/hr is insufficient to make any money operating a tractor. And this has only got worse with inflation. How Much Do We Charge? Tractor Side Hustle ua-cam.com/video/FdQU_dshQ3g/v-deo.html
Absolutely have to agree with you TIM, a canopy and fan make a huge difference on a tractor when mowing. I use an green top canopy from ebay and a 16" radiator electric fan from Amazon and made my own mount and screen.
Need to put a reverse fan they don’t exist but should be an option. or have one 3-d printed if it senses i’m getting too hot it reverses to self clean dust etc.
I have a 2032R with a 6’ fail mower and mow 4.1 acres. It takes about 3:15 hours to do. It is surprising that a bit more HP and 2’ more mower will cut the time by a fair bit. My ground is a bit smoother but not park like.
2’ more cut. …. One could say that it is 50% more cut. BUT if you could overlap, I suspect you get 5 ft cut per pass where I get 3’ cut per pass. So, 66% more.
Nice video. I used to mow with a similar set up and then switched to a JD997 zero turn mower and cut my mowing time from 7 hours to 2 hours. The jd997 can handle very tall grass. As you showed in this video, the subcompact tractors are nice but lack the power to get things done quickly.
I'm glad you talked about the hydraulic temp. I'm going to drop Hydros + a note and let him know I'm interested in a gauge. As always, thanks for sharing.
I use my 2025R with a Frontier 48' b-hog to do walking/ATV trails and it's perfect. If someone would make a 54" cutter I'd seriously consider buying it. Like you said Tim. A 48" works but could be a little bigger.
Good vid Tim. I have an old Woods 5' rotary cutter pulled by old IH 274 diesel (27.4 PTO HP) and could mow the stuff you were cutting in high range 2nd or sometimes have to drop down to high range 1st. Slow, but got-er-done (10 - 12 acres). Do it now with a Deere 997 ZT with 72" deck, lots quicker and lots better.
Hi Tim! Loved the video. I just finished mowing my 8 acre field with my 1025R and a 4’ RC2048 cutter. Grass was taller than the hood. Slow going to cut through that much material but it gets the job done. Hasn’t been anything I can’t do with this tractor. Might take longer than I’d like but that’s another issue!! Took me about 14 hours. Keep up the good videos!!
Hard to beat a rotary cutter. I use a 60 inch Howse brand from the 80s. They are lighter and my sub compact runs it fine. I use a massey 25hp and it has a fan that keeps the oil cool. I would use a finish mower but I like knowing that when I hit a branch or rock I don't have to worry about spindle/blade damage.
I use this same set up on my 5 acre lot. It takes ALL DAY. Grass isn't as thick so it does a better job and I use less fuel but it sure uses a lot of time.
I think all things considered for the height of the grass, the size of the tractor and the mower, it did what its supposed to do. Not sure how often this is maintained but Im sure time and effort all around would come down with more frequent maintenance. The TB equipment seems to holding up well for the value.
Great video work. I mow my 7 acres with the 1025R and the GM1060E. Although I don’t let the pasture get out of hand by cutting them once every 3-4 weeks. The grooming mower on the 3point, in my opinion works better for me than the belly mower. Living in SC, I agree an oil temp gauge would be nice. Thanks for your videos.
Your points are spot on. I have more trimming in my woods which takes more time than the long clear areas. Even with my 6 foot rotary cutter with somewhat more acres, it still takes time. I guess it’s all relative, and what one is willing to put up with. But doing it with a cab tractor is so much more tolerable :-). Blessings
I remember last year you used the blue tracker (battery) cutting the hole field and it did a great job. I do miss watching you work on that tracker around the farm. Sorry to hear that there out of business.
Great informative video. Would like to see it with a 5 or 6 foot, and then the flex wing. Then summarize each mower, the rate per hour of each, and total cost per job per machine for those 4.3 acres
Total cost per job is much more difficult. We have an entire episode on this. How Much Do We Charge? Tractor Side Hustle ua-cam.com/video/FdQU_dshQ3g/v-deo.html
Deere will let me order a canopy and fan. Green Parts Store will ship for free with your code. I had decided to try the canopy alone until I heard your comment about the fan.
My LS tractor the seat is like sitting on plywood and I really don't have leg room. I bought a mower from tsc and they don't really have instructions except for cutting the driveshaft. I bought a 5 footer but still not as wide as the back tires, so i kinda overlap when mowing and I find it better to remove the bucket. It's over priced for what it is and i probably wouldn't buy another one like it. The lower pins i had to loctite them to keep the nuts tight. I never had that happen before. I like that seat you have, it's like the one on my zero turn and it doesn't work anymore, maybe from the salt air in Florida. This mower does cut well, just this year the grass and weeds were taller than the tractor in spots.
Tim an old farmer taught me if you think you have been exposed to poison ivy wash with bar laundry soap washes the oils off also helps to use if you get poisson ivy to dry it out
I have 6.5 acres and a few cows keep it mowed and fertilized for the most part. I shred 2 times a year with an undersized 5’ Ford shredder that is old old. Would like to get a 6’ since that’s width of tractor but cost doesn’t add up for two cuttings a year. I’m wondering if the HST is cause if heat issue as they’re more setup for stop and goes than constant run? I have gear drive but no temp on hydro so have no clue if it runs cooler or not with hydro.
Tim. Your video was spot on. I spent 7 hour the other day to mow 6 acres of thistle. Much bigger tractor 60 HP Kubota, with 6 ft brush hog, but new air ride seat. The issue is how rough my field is. Much rougher than yours with terraces carved into the hillside years ago. I can't do more than 5-6 hours a day, in low gear, without morphine at end of for my surgically repaired back. :-) I would like a much bigger bat wing but don't have the rear hydraulics, yet. So dollars for batwing ($$$), dollars for hydraulics ($$), or just mow a few acres every week and rely on drugs to recover. As a hobby farmer it looks like the third option for now.
Tim, I just got the new seat figuring it would work on my 2018 1025R. Well I’m having a challenge. I had to remove the existing seat hinge plate and use the supplied mounting brackets. That means I can’t use my backhoe. I will be contacting the vendor to see if they have an alternative. I will update this as we get a resolution
It does not work with the backhoe. Sorry. I mentioned that in the full review/install. I believe that info is also in the seat’s description. Unfortunately, I failed to mention it in this episode. Sorry.
Tim, we talked to the manufacturer and they said we were the first to bring it to their attention. They indicated they would try to fabricate a base with a hinge
The SCUTs work well only on properties which are small. The SCUTs niche is working in more confined areas where their smaller turning radius is an advantage. When you get to long straight runs, bigger will always be quicker.
I find I’m faster if I don’t picture frame the mow first. I take the longest straightest line and do my cleanups in the turns. Also I don’t think you need an older tractor. A 2wd 5050e cost about as much as a 1025r with a loader. I mow a couple properties like this with my 3025e and a 5’ rotary cutter. I always question whether or not I should be doing it. I do enjoy it though. It’s a nice change of pace from the spraying I normally do.
id be interested to see if the 1025r can handle a 5 ft trailed cutter ive got a 5ft trailed king kutter or my 9n ford and they are roughly the same pto hp
Correct. The last one I used was a 1960s or 70s model on my grandfather’s IH 300 tractor. I did some research a few years back on the newer versions for my old JD 790, but never demo’s or picked one up.
Would be interesting to mow this property with every one of your tractors and implements as part of a series then do a summary episode comparing them all. Include in this a zero-turn if you think it can mow this property without tearing it up. You could include subjective elements like sub-compact vs compact vs utility comfort to mow the property. Part of that will be features of the tractor but also wheelbase, width and weight should benefit larger tractors. Just some thoughts. Thank you
My 48 Brush Hog is 40+ years old, and still works perfectly and has never broken down. I bet a Flail mower cant go a season. They are definitely the best value per dollar youll ever spend on implements.
Flail mowers do alright. I have an Italian built 88" that I purchased new about 15 years ago. I have mowed about 80 acres per year with it every year. Most years It mowed that area twice, so 160 acres x 15 = 2400 acres to date. I've put one new set of belts on and turned the fails, that's it for mechanical work. I just grease it and go. It cuts fast and leaves a nice job behind. The material gets chopped up fine which is good for regrowth. The suction created by the fails lifts the material flattened by the one set of tires that runs on the uncut pasture. I also have a 72" Landpride bush hog type mower ( inherited) but don't use it. The flail mower is faster and does a nicer job. Cost is the only issue. I think the Landpride cost about $1200 new while the flail mower was about $8,000, so it ought to work better!
I have had a different experice with my flail mower, i have a 28 hp compact tractor and using a 5ft flail in heavy grass requires a lower gear and seems to bog the tractor more than my 5 ft rotary cutter.
I’m looking for a brush mower to use with an Oliver Super 77. 7 or 8ft wide. The tractor has a drawbar and 540 pto. The only problem is it has NO hydraulics. Any recommendations from anyone on what to get/do? Thanks!
Hi Tim I have only owned a bunch of belly mower garden tractors and now B2601. I do only smaller yards with grass sometimes that tall. I really don’t have to many problems with using just that. I was wondering is there an advantage to a rotary cutter vs belly mower? Other than getting under trees. Having a rotary cutter for that would be great.
Rotary cutter is built stronger. The blade mechanism is totally different, with swing away blades. Much less risk of damaging the gearbox. Especially in the kubota MMM which have the center blade directly attached to the gearbox. (Deere belt drives all 3 blades). Additionally, rotary cutters are equipped with stump jumpers to help the spindle ride over larger obstacles. These cutters are simply made tougher for mowing larger stuff.
I just have a question. How come you don't have to engage the RIO button while backing up with PTO running. With my mower deck it instantly stops the tractor.
Good Morning and thank you for the information. What do you do with the most of the attachments after you get done doing test / demonstration? Do you sell them, send them back, or keep them? Asking because I do live kind of close “Delphi “ and I have a 1025r .
Great video. I do side mowing as a means of extra cash. Based on your money videos, I doubt the land owner would pay what you feel you needed for the time spent. As far as the mower, you called it a rotary cutter. Is it a cutter with a sharpened blade or a bush hog bar? When I’m asked to do a property, my first question is “how long has it been since it last cut”? If it’s over a month I take the brush hog. If it’s a monthly cutting, I’ll take a finishing mower or flail mower. As you mentioned they all have advantages and disadvantages. Good video 👍
Tim, while I agree that larger property mowing would not be real feasible with a sub compact, I would caution folks on how big of a tractor/cutter they should purchase. If they go to a large frame tractor (often the case with the 99-100hp tractor, they could end up needing a smaller tractor to do trim work under and around trees or other objects in many properties. Personally, I would never take a fail mower to a property that I did not know or a property I knew had debris and or rocks on it.
The number one advantage a flail mower has over a rotary is it doesn’t throw rocks, sticks, etc, I have had rotary mowers throw rocks 300 feet, unless your out in the middle of nowhere then I would take the rotary over a flail.
If i remember right it looks like the batwing mower mows better then the 3 point hitch mowers but it seems like a bigger tractor is needed for the batwing
Front cut; I believe the bigger Deer tractors in Europe have a front PTO option. Obviously more tractor cost. Would the mini front end articulated loaders be an option for front cut?
How much would you charge the tower people to mow this if you were being paid by them? 6hours mowing and some travel time. and would your hourly rate be much different if you were using the 3 or 4 series Johnny and the 10-foot batwing mower. This video was great example of the seat time you can have if mowing your own property or the same time earning a living.
I have a 1023E and I watch TTWT all the time. I really enjoy seeing what you have going on. Watching you haul that loader and grapple around for hours is agonizing. I realize you have some rocks there to deal with and I get that. But JD has engineered this tractor so well, it take 2 minutes to remove the loader. Why wouldn't you have it on site, but remove it for the hours you spend bouncing around the field. Plus your center of gravity will be lower for a smoother ride side to side. My 2 cents. You probably are used to it and do not even notice. Like my neighbor who used to mow his lawn with a 1025R with a belly mower, loader on the front and backhoe on the back. 🙂😲
If I take it off, folks have a fit. If I leave it on other folks have a fit. I used it here to push back some brush on the brush piles. I find it advantageous to have it on while mowing.
@TractorTimewithTim well I certainly get that. And you are very good at what you do. I really appreciate how, in one day, on my 2 acres, I can till my garden, haul things in the loader, then remove everything, drive over my belly mower, and mow the lawn. And only lose 10 minutes switching things over. I love it. And mowing with the one series with a belly mower is fun for me. Lots of blade speed and nimble enough to mow around the house. Now, if I could just stop hooking the blinkers on tree limbs...
Fair enough. There are many different types of flail mowers, and there are many different types of materials. So, plenty of room for different experiences!
A lot of this question depends on the job you’re doing. I own a junk and debris removal company myself and love the 1025R we will be using it on Friday to remove a bunch of old rotten railroad tie garden plots and level up the yard afterward. It is perfect for a job like that. My skid steer would tear their yard to oblivion.
Iam starting to love your 1 series videos as well....I just found out that there are also some (very rare) great deals on 1 series machines in germany....I see my self starting a business with a one series someday....🙂 it was a 2012 1026R with a loader (and!) backhoe! interesting....there is normaly no backhoe avialable in germany....🤨 the price was only 15.500EUR....great deal right?
@@TractorTimewithTim Thanks for answering. :) I dont need it right away, might be a couple years...but you know what?it was gone this morning anyway...🤣 Someone thought the same like we did...
Tim, following the "fail mower hype", I'd really be interested in seeing larger flail mowers like 7'-10' for the 5075e, maybe even a pull-type vs 3-point
@TractorTimewithTim Aside from the typical Tiger and Alamo commerical mowers, Peruzzo makes a 4200-R triflex flail mower that looks pretty interesting.
Is there a stopping point that your hydraulic oil temp gets to? I see that 240 is the upper range of that gauge, but you said the previous day it ran at that temp all day. Just wondering if there is a point which you stop to let things cool, or if it's just a creature comfort to have the gauge?
Tim how many hours do you think a 1025r is gonna be able to take. No modifications. perfect service record. i dont think anyones got enough hours on them becides you lol to tell yet.
You might be able to run a 4' behind the L1500, but it would not handle it well. The gear drive tractor, combined with the clutch dependent PTO would be frustrating. ...and you really don't. have enough HP. Keep the ole L1500 on other lighter tasks :-)
I gotta say I prefer the cut quality of a flail mower.... even with hammer blades I can cut my lawn. Then I can take it out into the forest and it is more nimble around trees etc. That being said I don't have a rough cut mower to compare....
Your biggest complaint seems to be cutting behind the tractor. You even mentioned how Vinny Ventrac cuts better with the front mount mower. Have you looked into one of those European style front 3 point hitches and any solutions to front mount a mower on little Johnny? I've seen front mounted snow blowers and power brooms on 1 series with the front 3 point but no mowers yet.
Been a while since we’ve seen you at the tower site. I’m sure you’ve seen some dash thunder videos. He makes a living with a 1025R and 4 foot implements. He recently changed the name of his channel. His actual name was Dash Thunder so that’s probably why he changed it. I couldn’t watch all your video this morning because my wife started talking and I’ll catch it this weekend. Tell Christy I said hey. I’m sure if you had a time machine you would go back in time and rename the channel Tractor time with Tim and Christy…
Poor Christie, having to stand out there and film you for two days in the sun and heat and poison ivy blowing around. What a great wife you have. Very interesting test. I appreciate your input.
She really is special. 😊
I remember when you started this property. What a transformation 😮 Hope your lives are getting back to normal.
You have done so much for the small tractor community
Awesome demonstration Tim! Next cut let’s mow it with the 3046r and the ts10 !!!
Tim, what I find interesting on this project is the old farmer’s always told me that when the outside rounds of a field were done the field was 1/4 way done. Even with the odd shape you mowed that math of 1.5hrs to do outside rounds would put you at 6hrs for the whole property. Those old farmers sure did always know what they were talking about.
I've NEVER been first on a video. 4' mower on more than 4 acres? Amazing. Great drone shots.
The hero we need
Tim like that you took the time to explain the advantages and disadvantages of the 1025 setup. Like you said there are alternatives.
I really enjoy the tower project.
that extendable wheel would be nice on my brush hog since it doesn't attach to the quick hitch
My little blue 94 Ford 1320 bought new in 94, yup 30 years in this seat, 5' cuts 1 acre per hour with ease, keeping pto at 540 burns about 3 quarts per acre/hour. in heavy grass 2 quarts in light duty.
Can we get a comparison on the 1025 mowing to the ventrac on time wise mowing the tower property?
we had a flail chopper in ohio we used to chop oats or grass to feed for silage, then we took the upper off and put cap on to chop corn stalks and it worked well for brush
For cleaning off the grille, I have a small battery powered workshop blower that is just the thing for getting all the grass seeds and fluff off the tractor and give the thing a quick clean when I'm done.
Saves bringing the seeds back to the house yard and the shed..
As much as I enjoyed mowing that with you guys (with Johnny 5 and the TS-10), I'm glad I missed this adventure!
Yea! Wish I had!!!
I used to mow an R/C model airplane field with a Ford 8N and flail mower of equal age. No rocks, no brush, and it was set low. Did a finish mower quality cut. I use a 48” Everything Attachments HD rotary on my 1025R, but in addition to an old pasture now mostly just a dog play area I mow trails through brush lots and paths through woods. LOTS of rocks, roots and occasional small fallen branches and dogwood/milliflori rose.
well, i have ten acres and about half of it is mowable. I started out cutting it with my 1025. did a great job. was slow though. then I got a 9 series zero turn and cut my time in half.
This was a fun informative video thanks. I have been watching videos here for a long time and I seem to recall back years ago when Tim would have thought $100 an hour for mowing was a good rate. The wealthier you get the smaller $100 looks.
No, that is incorrect.
We have a complete video attempting to help folks set prices.
In general, $100/hr is insufficient to make any money operating a tractor.
And this has only got worse with inflation.
How Much Do We Charge? Tractor Side Hustle
ua-cam.com/video/FdQU_dshQ3g/v-deo.html
Absolutely have to agree with you TIM, a canopy and fan make a huge difference on a tractor when mowing. I use an green top canopy from ebay and a 16" radiator electric fan from Amazon and made my own mount and screen.
Need to put a reverse fan they don’t exist but should be an option. or have one 3-d printed if it senses i’m getting too hot it reverses to self clean dust etc.
I have a 2032R with a 6’ fail mower and mow 4.1 acres. It takes about 3:15 hours to do. It is surprising that a bit more HP and 2’ more mower will cut the time by a fair bit. My ground is a bit smoother but not park like.
2’ more cut. ….
One could say that it is 50% more cut. BUT if you could overlap, I suspect you get 5 ft cut per pass where I get 3’ cut per pass. So, 66% more.
Amazing video! Thank you for all that great advice in my opinion. Thank you for posting 😀
Thank you for sharing this info.
Nice video. I used to mow with a similar set up and then switched to a JD997 zero turn mower and cut my mowing time from 7 hours to 2 hours. The jd997 can handle very tall grass.
As you showed in this video, the subcompact tractors are nice but lack the power to get things done quickly.
Uh, no, z997 is not equipped to handle this size grass.
Wonderful machine, but not for this application.
I'm glad you talked about the hydraulic temp. I'm going to drop Hydros + a note and let him know I'm interested in a gauge. As always, thanks for sharing.
I use my 2025R with a Frontier 48' b-hog to do walking/ATV trails and it's perfect. If someone would make a 54" cutter I'd seriously consider buying it. Like you said Tim. A 48" works but could be a little bigger.
Good vid Tim.
I have an old Woods 5' rotary cutter pulled by old IH 274 diesel (27.4 PTO HP) and could mow the stuff
you were cutting in high range 2nd or sometimes have to drop down to high range 1st.
Slow, but got-er-done (10 - 12 acres).
Do it now with a Deere 997 ZT with 72" deck, lots quicker and lots better.
Those drone shots are incredible! Way to go team!
Hi Tim! Loved the video. I just finished mowing my 8 acre field with my 1025R and a 4’ RC2048 cutter. Grass was taller than the hood. Slow going to cut through that much material but it gets the job done. Hasn’t been anything I can’t do with this tractor. Might take longer than I’d like but that’s another issue!! Took me about 14 hours. Keep up the good videos!!
Wow! Persistence!
Hard to beat a rotary cutter. I use a 60 inch Howse brand from the 80s. They are lighter and my sub compact runs it fine. I use a massey 25hp and it has a fan that keeps the oil cool. I would use a finish mower but I like knowing that when I hit a branch or rock I don't have to worry about spindle/blade damage.
I use this same set up on my 5 acre lot. It takes ALL DAY. Grass isn't as thick so it does a better job and I use less fuel but it sure uses a lot of time.
I think all things considered for the height of the grass, the size of the tractor and the mower, it did what its supposed to do. Not sure how often this is maintained but Im sure time and effort all around would come down with more frequent maintenance. The TB equipment seems to holding up well for the value.
This would be a good test case for HydroPlus's larger hydro cooler to see if temps come down or improve with sustained use
I never see over 165 with Hydrosplus.com oil cooler. Use code TTWT :-)
Great video work. I mow my 7 acres with the 1025R and the GM1060E. Although I don’t let the pasture get out of hand by cutting them once every 3-4 weeks. The grooming mower on the 3point, in my opinion works better for me than the belly mower. Living in SC, I agree an oil temp gauge would be nice. Thanks for your videos.
Your points are spot on. I have more trimming in my woods which takes more time than the long clear areas. Even with my 6 foot rotary cutter with somewhat more acres, it still takes time. I guess it’s all relative, and what one is willing to put up with. But doing it with a cab tractor is so much more tolerable :-). Blessings
Yes. I was DEFINITELY missing the cab!
My New Holland 1630 has an oil cooler in front of the radiator. My 1520 may also.
I remember last year you used the blue tracker (battery) cutting the hole field and it did a great job.
I do miss watching you work on that tracker around the farm. Sorry to hear that there out of business.
Wait, you remember incorrectly! I mowed for 1 hour 50 minutes then the battery died. Not even 1/2 the field.
@@TractorTimewithTim Thank Tim. I don't know that. I thought you cut the hole thing. Glad you remembered..
Great informative video. Would like to see it with a 5 or 6 foot, and then the flex wing. Then summarize each mower, the rate per hour of each, and total cost per job per machine for those 4.3 acres
Total cost per job is much more difficult.
We have an entire episode on this.
How Much Do We Charge? Tractor Side Hustle
ua-cam.com/video/FdQU_dshQ3g/v-deo.html
I use a chain on my top link for any rear mower.
I’ve got a old supper B 80s model and yes it helps on wear & tear on cutter
Fascinating experiment! Love the content, channel, and results?
Deere will let me order a canopy and fan. Green Parts Store will ship for free with your code. I had decided to try the canopy alone until I heard your comment about the fan.
My LS tractor the seat is like sitting on plywood and I really don't have leg room. I bought a mower from tsc and they don't really have instructions except for cutting the driveshaft. I bought a 5 footer but still not as wide as the back tires, so i kinda overlap when mowing and I find it better to remove the bucket. It's over priced for what it is and i probably wouldn't buy another one like it. The lower pins i had to loctite them to keep the nuts tight. I never had that happen before. I like that seat you have, it's like the one on my zero turn and it doesn't work anymore, maybe from the salt air in Florida. This mower does cut well, just this year the grass and weeds were taller than the tractor in spots.
Tim an old farmer taught me if you think you have been exposed to poison ivy wash with bar laundry soap washes the oils off also helps to use if you get poisson ivy to dry it out
,we used felsnapha soap
I have 6.5 acres and a few cows keep it mowed and fertilized for the most part. I shred 2 times a year with an undersized 5’ Ford shredder that is old old. Would like to get a 6’ since that’s width of tractor but cost doesn’t add up for two cuttings a year.
I’m wondering if the HST is cause if heat issue as they’re more setup for stop and goes than constant run? I have gear drive but no temp on hydro so have no clue if it runs cooler or not with hydro.
Tim. Your video was spot on.
I spent 7 hour the other day to mow 6 acres of thistle. Much bigger tractor 60 HP Kubota, with 6 ft brush hog, but new air ride seat. The issue is how rough my field is. Much rougher than yours with terraces carved into the hillside years ago. I can't do more than 5-6 hours a day, in low gear, without morphine at end of for my surgically repaired back. :-)
I would like a much bigger bat wing but don't have the rear hydraulics, yet. So dollars for batwing ($$$), dollars for hydraulics ($$), or just mow a few acres every week and rely on drugs to recover. As a hobby farmer it looks like the third option for now.
Funny!!!
One of the big things about cut quality on a rotary mower is keeping the blades sharp
All Good
Tim, I just got the new seat figuring it would work on my 2018 1025R. Well I’m having a challenge. I had to remove the existing seat hinge plate and use the supplied mounting brackets. That means I can’t use my backhoe. I will be contacting the vendor to see if they have an alternative. I will update this as we get a resolution
It does not work with the backhoe. Sorry.
I mentioned that in the full review/install. I believe that info is also in the seat’s description.
Unfortunately, I failed to mention it in this episode. Sorry.
Tim, we talked to the manufacturer and they said we were the first to bring it to their attention. They indicated they would try to fabricate a base with a hinge
The SCUTs work well only on properties which are small. The SCUTs niche is working in more confined areas where their smaller turning radius is an advantage. When you get to long straight runs, bigger will always be quicker.
i made a flex hitch on my 48" cutter , they help
I find I’m faster if I don’t picture frame the mow first. I take the longest straightest line and do my cleanups in the turns. Also I don’t think you need an older tractor. A 2wd 5050e cost about as much as a 1025r with a loader. I mow a couple properties like this with my 3025e and a 5’ rotary cutter. I always question whether or not I should be doing it. I do enjoy it though. It’s a nice change of pace from the spraying I normally do.
Fair statement on the 2wd 5e. Quite cost effective.
id be interested to see if the 1025r can handle a 5 ft trailed cutter ive got a 5ft trailed king kutter or my 9n ford and they are roughly the same pto hp
Hey tim for the poison ivy, try scrubbing down with rubbing alcohol, you probably know that tip, but it works for me, thanks for the videos
I would be interested in seeing you review one of the newer design bar mower for ditch and pond bank mowing.
Sickle bar?
Mowing Overgrown Ditch Banks! Turbo Subcompact Tractor + Sickle Bar Mower!
ua-cam.com/video/06WkyVFqi-g/v-deo.html
Correct. The last one I used was a 1960s or 70s model on my grandfather’s IH 300 tractor. I did some research a few years back on the newer versions for my old JD 790, but never demo’s or picked one up.
@@kordnplucheck out the video I linked. I have a couple more.
Would be interesting to mow this property with every one of your tractors and implements as part of a series then do a summary episode comparing them all. Include in this a zero-turn if you think it can mow this property without tearing it up. You could include subjective elements like sub-compact vs compact vs utility comfort to mow the property. Part of that will be features of the tractor but also wheelbase, width and weight should benefit larger tractors. Just some thoughts. Thank you
My 48 Brush Hog is 40+ years old, and still works perfectly and has never broken down. I bet a Flail mower cant go a season. They are definitely the best value per dollar youll ever spend on implements.
Flail mowers do alright. I have an Italian built 88" that I purchased new about 15 years ago. I have mowed about 80 acres per year with it every year. Most years It mowed that area twice, so 160 acres x 15 = 2400 acres to date. I've put one new set of belts on and turned the fails, that's it for mechanical work. I just grease it and go.
It cuts fast and leaves a nice job behind. The material gets chopped up fine which is good for regrowth.
The suction created by the fails lifts the material flattened by the one set of tires that runs on the uncut pasture.
I also have a 72" Landpride bush hog type mower ( inherited) but don't use it. The flail mower is faster and does a nicer job.
Cost is the only issue. I think the Landpride cost about $1200 new while the flail mower was about $8,000, so it ought to work better!
When you mentioned it in a previous video I thought you would have Dave doing it 😂😂
Why didn’t I think of that!!!?
I always overlap tires width it gets the best cut, and I can go faster
I use a 5 foot brush hog on my mahindra 26 hp and it doe's a fine job!
I do commercial work with a 2025r and a 5' light duty rotary and that is about all it will handle.
I have had a different experice with my flail mower, i have a 28 hp compact tractor and using a 5ft flail in heavy grass requires a lower gear and seems to bog the tractor more than my 5 ft rotary cutter.
Makes sense. Lots o mulching goin on inside that mower.
Morning 🇨🇦
I’m looking for a brush mower to use with an Oliver Super 77. 7 or 8ft wide. The tractor has a drawbar and 540 pto. The only problem is it has NO hydraulics. Any recommendations from anyone on what to get/do? Thanks!
Hmm. I think you can add a hydraulic remote, right? There are pull type 7-8 ft mowers available.
Hey Tim! Just wondering have you ever thought about haying this? I think that would be cool for the viewers and also a little bit of side money.
Hi Tim
I have only owned a bunch of belly mower garden tractors and now B2601. I do only smaller yards with grass sometimes that tall. I really don’t have to many problems with using just that. I was wondering is there an advantage to a rotary cutter vs belly mower? Other than getting under trees. Having a rotary cutter for that would be great.
Rotary cutter is built stronger. The blade mechanism is totally different, with swing away blades. Much less risk of damaging the gearbox. Especially in the kubota MMM which have the center blade directly attached to the gearbox. (Deere belt drives all 3 blades).
Additionally, rotary cutters are equipped with stump jumpers to help the spindle ride over larger obstacles.
These cutters are simply made tougher for mowing larger stuff.
I just have a question. How come you don't have to engage the RIO button while backing up with PTO running. With my mower deck it instantly stops the tractor.
I don’t think that applies to the rear PTO.
….in any case, I zip tied that switch.
Good Morning and thank you for the information. What do you do with the most of the attachments after you get done doing test / demonstration? Do you sell them, send them back, or keep them? Asking because I do live kind of close “Delphi “ and I have a 1025r .
I got a John Deere 50 and a 6' single spindle brush hog that I use for my brush hoging jobs around the farm
Great video. I do side mowing as a means of extra cash. Based on your money videos, I doubt the land owner would pay what you feel you needed for the time spent. As far as the mower, you called it a rotary cutter. Is it a cutter with a sharpened blade or a bush hog bar?
When I’m asked to do a property, my first question is “how long has it been since it last cut”? If it’s over a month I take the brush hog. If it’s a monthly cutting, I’ll take a finishing mower or flail mower.
As you mentioned they all have advantages and disadvantages.
Good video 👍
A man in wv he and his wife use two ventracs to cut with does a great job cutting
I learned a lot Tim! Mostly about the accessories. Likely ordering the seat. By chance do you have a link for the canopy fan. I want that for my 3039R
don't forget code ttwt for the seat. I may have failed to mention.
I'm afraid there may be a legal issue on the fan. Contact artillian.com to see if it is still available.
If you did say it, I definitely didn’t remember.
Would a 6ft flail mower be to big for a 1025r with future plans to turbo?
Likely too big. Might not be able to lift
You mention a few other types of mowing attachments for the tractor. How about a sickle bar mower?
We have shown a sickle on this channel. ...on a 1025r
ua-cam.com/video/QQwc2tbliIE/v-deo.html
Great video!
Is there a reason why you did not remove all that brush next to the towers? I would expect it to get tall enough at some point to be a problem.
Still working at it, Ken. We save a bit of it in case we get a new brush mulcher to try :-)
Tim, while I agree that larger property mowing would not be real feasible with a sub compact, I would caution folks on how big of a tractor/cutter they should purchase. If they go to a large frame tractor (often the case with the 99-100hp tractor, they could end up needing a smaller tractor to do trim work under and around trees or other objects in many properties.
Personally, I would never take a fail mower to a property that I did not know or a property I knew had debris and or rocks on it.
The number one advantage a flail mower has over a rotary is it doesn’t throw rocks, sticks, etc, I have had rotary mowers throw rocks 300 feet, unless your out in the middle of nowhere then I would take the rotary over a flail.
If i remember right it looks like the batwing mower mows better then the 3 point hitch mowers but it seems like a bigger tractor is needed for the batwing
correct.
Very nice
Front cut; I believe the bigger Deer tractors in Europe have a front PTO option. Obviously more tractor cost. Would the mini front end articulated loaders be an option for front cut?
Would removing the loader help reduce the buildup of grass and dust on the front filter and mesh?
Probably not. Likely would be worse.
yea i wish i had a oil cooler on my 2305
How often do you have to sharpen the blades on the mower like that? Every job, once a year.. or just when needed?
Only when they ‘roll’ upward. We leave them quite blunt. Otherwise they roll upward pretty badly, or break off
How much would you charge the tower people to mow this if you were being paid by them? 6hours mowing and some travel time. and would your hourly rate be much different if you were using the 3 or 4 series Johnny and the 10-foot batwing mower. This video was great example of the seat time you can have if mowing your own property or the same time earning a living.
I wondered how they mow those areas.
I have a 1023E and I watch TTWT all the time. I really enjoy seeing what you have going on. Watching you haul that loader and grapple around for hours is agonizing. I realize you have some rocks there to deal with and I get that. But JD has engineered this tractor so well, it take 2 minutes to remove the loader. Why wouldn't you have it on site, but remove it for the hours you spend bouncing around the field. Plus your center of gravity will be lower for a smoother ride side to side. My 2 cents. You probably are used to it and do not even notice. Like my neighbor who used to mow his lawn with a 1025R with a belly mower, loader on the front and backhoe on the back. 🙂😲
If I take it off, folks have a fit. If I leave it on other folks have a fit.
I used it here to push back some brush on the brush piles. I find it advantageous to have it on while mowing.
@TractorTimewithTim well I certainly get that. And you are very good at what you do. I really appreciate how, in one day, on my 2 acres, I can till my garden, haul things in the loader, then remove everything, drive over my belly mower, and mow the lawn. And only lose 10 minutes switching things over. I love it. And mowing with the one series with a belly mower is fun for me. Lots of blade speed and nimble enough to mow around the house. Now, if I could just stop hooking the blinkers on tree limbs...
I'm surprised by your criticism of flail mower not handling the bigger stuff. My experience is the exact opposite.
Fair enough. There are many different types of flail mowers, and there are many different types of materials. So, plenty of room for different experiences!
A lot of this question depends on the job you’re doing. I own a junk and debris removal company myself and love the 1025R we will be using it on Friday to remove a bunch of old rotten railroad tie garden plots and level up the yard afterward. It is perfect for a job like that. My skid steer would tear their yard to oblivion.
I was specifically addressing brush mowing. Was that not obvious???
Iam starting to love your 1 series videos as well....I just found out that there are also some (very rare) great deals on 1 series machines in germany....I see my self starting a business with a one series someday....🙂 it was a 2012 1026R with a loader (and!) backhoe! interesting....there is normaly no backhoe avialable in germany....🤨 the price was only 15.500EUR....great deal right?
Yes. that is a good deal. Better jump on it!
@@TractorTimewithTim Thanks for answering. :) I dont need it right away, might be a couple years...but you know what?it was gone this morning anyway...🤣 Someone thought the same like we did...
Tim, following the "fail mower hype", I'd really be interested in seeing larger flail mowers like 7'-10' for the 5075e, maybe even a pull-type vs 3-point
Do you have a particular pull type flail in mind? I don't know of any majors that make them...especially flex wing.
@TractorTimewithTim Aside from the typical Tiger and Alamo commerical mowers, Peruzzo makes a 4200-R triflex flail mower that looks pretty interesting.
Is there a stopping point that your hydraulic oil temp gets to? I see that 240 is the upper range of that gauge, but you said the previous day it ran at that temp all day. Just wondering if there is a point which you stop to let things cool, or if it's just a creature comfort to have the gauge?
Nope. There is no built in sensor to my knowledge.
I would love to see a comparison between the 6ft and 10ft!
We have done cut quality, but not cut time.
ua-cam.com/video/3pZdfK_ddZM/v-deo.html
Do the isotunes mic work decent while on the tractor? Thinking phone calls. Or is there just too much noise?
The Link 2.0 with the extendable mic works great. The closer the mic is to your mouth, the better it works.
Tim how many hours do you think a 1025r is gonna be able to take. No modifications. perfect service record. i dont think anyones got enough hours on them becides you lol to tell yet.
Lots!
have you got a finger mower you could use as a comparison Tim
Finger mower? Doesn’t sound like something I want :-)
@@TractorTimewithTim sorry you guys in US would call them a Sickle bar mower 😃
You can use a wider flail mower then a rotary cutter, and a flail Does a significantly better job then a rotary cutting with Y blades on it
Tim, i own a 2240 John Deere and a L1500 Kubota sub compact, can i run a 4' rotary cutter behind the Kubota? Thanks
You might be able to run a 4' behind the L1500, but it would not handle it well. The gear drive tractor, combined with the clutch dependent PTO would be frustrating. ...and you really don't. have enough HP. Keep the ole L1500 on other lighter tasks :-)
I gotta say I prefer the cut quality of a flail mower.... even with hammer blades I can cut my lawn. Then I can take it out into the forest and it is more nimble around trees etc. That being said I don't have a rough cut mower to compare....
Having 85 acres of sagebrush I want to mow, my 6ft brush hog would take forever. I do want a flex wing mower but they are so expensive.
Your biggest complaint seems to be cutting behind the tractor. You even mentioned how Vinny Ventrac cuts better with the front mount mower.
Have you looked into one of those European style front 3 point hitches and any solutions to front mount a mower on little Johnny? I've seen front mounted snow blowers and power brooms on 1 series with the front 3 point but no mowers yet.
Yes, I have. I alluded to that in the video. I have been unable to find a suitable solution in the USA.
How do you like your new scooter
Love it. Did you see the video with details about it?
Been a while since we’ve seen you at the tower site. I’m sure you’ve seen some dash thunder videos. He makes a living with a 1025R and 4 foot implements. He recently changed the name of his channel. His actual name was Dash Thunder so that’s probably why he changed it. I couldn’t watch all your video this morning because my wife started talking and I’ll catch it this weekend. Tell Christy I said hey. I’m sure if you had a time machine you would go back in time and rename the channel Tractor time with Tim and Christy…