Thank you for this video. I have been struggling to assign Safe to a switch for weeks. This is my first plane with AS3x technology & the manuals don’t go into the details that you show here. After watching this I found that Safe was assigned to my chosen switch, the problem was the switch was not programmed to change the gains. Yours is the only video I found that talks about what the switch does & how to adjust safe.
Thank you Mike. I find these tips to be very useful. I'm 50+ just getting into this, and it's so much easier to see someone do it, than trying to read it lol :)
Hey Mike Great video. Got a question. On my DX9, I have my SAFE / AS3X switch on the " A " switch. By Default, SAFE is pushed all the way back, and AS3X is pulled inwards. How can I reverse that function to where SAFE is inwards and AS3X is pushed back. Hope I'm making since. Let me know please. THANKS.
Great video. Now I finally understand where is the AS3X and Safe technology controled! Channel 5! And the amount of stabilisation is decided by a 2 or 3 way switch! So I could on my heli, assign another switch for the throttle and pitch curves! Am I right?
If you have retracts would you set your switch over to back far right or still use A switch ? Judy wondering is assigned switch “ gear” gets impacted when you have retracts ?
I'm confused, as I usually am by Horizon Support. Are we adjusting SAFE mode or the AS3X system. When you opened the manual I saw nothing relating to AS3X, just SAFE. In a recent phone conversation with Product Support the person I talked to about AS3X had no idea who Mike Lee is and when I shared the information regarding this video with them they were not helpful.
Reassign the switch as Mike mentions at the end. He says it can be assigned to the knob for variable gain, but at the beginning he tells you it can be assigned to any open switch; and that a two position switch is best.
From what I understand this video is totally wrong you would have to Bluetooth the ax 3x to a phone on iPad and adjust threw the app you do not adjust from your radio
Mike, can this be implemented with the AR636 Rx (SAFE SELECT) that has both SAFE & AS3X? My Tx mode switch controls SAFE ON or OFF, and AS3X is always ON. Can I setup a switch to turn AS3X ON & OFF while leaving the SAFE ON/OFF switch and functions as they are?
In order to set the AS3x ON/OFF in my models, I have the fly modes assigned to switch "H" (I only use two fly modes: FM 1 NO gains; FM 2 gains). You can do this from the AS3X screen on your TX. I don't use the safe function so, I can't comment on that one.... Hint: On the receiver(s), I have all the Rates set up at 100% and the Expo at 0%, that way I can adjust these parameters from my TX. So, AS3X on/off in "H" and H/L rates in "C".......
This information is ALL wrong.... his not doing anything with the as3x. Also, it seems like he thinks his adjusting a gyro or something but his messing with the SAFE system... don't listen to what his saying.
This AS3X was soooooo not needed I pist away $100 for a micro Spitfire. Right at take offit would not respond to my control inputs. It would partially respond then suddenly do it's own thing. Less then 30 seconds of flight it crashed and I was out my money.
Thank you for this video. I have been struggling to assign Safe to a switch for weeks. This is my first plane with AS3x technology & the manuals don’t go into the details that you show here. After watching this I found that Safe was assigned to my chosen switch, the problem was the switch was not programmed to change the gains. Yours is the only video I found that talks about what the switch does & how to adjust safe.
Great presentation! Good view of the screen and each step/keystroke explained. This is what such presentations should be.
Thank you Mike.
I find these tips to be very useful.
I'm 50+ just getting into this, and it's so much easier to see someone do it, than trying to read it lol :)
Thank you Mike! Very clear and easy instructions!
Thanks so much!!!! helped me seating up my DX8 II with the A-10 twin 60mm !! thanks thanks thanks
AMAZING 👏 HELPER HAS COME TO THE RESCUE TOP STUFF 👏
Hey Mike Great video. Got a question. On my DX9, I have my SAFE / AS3X switch on the " A " switch. By Default, SAFE is pushed all the way back, and AS3X is pulled inwards. How can I reverse that function to where SAFE is inwards and AS3X is pushed back. Hope I'm making since. Let me know please. THANKS.
I got as far a RX assignments, but found that there was not a "next" to go to?
Great video. Now I finally understand where is the AS3X and Safe technology controled! Channel 5! And the amount of stabilisation is decided by a 2 or 3 way switch! So I could on my heli, assign another switch for the throttle and pitch curves! Am I right?
Me too
If you have retracts would you set your switch over to back far right or still use A switch ?
Judy wondering is assigned switch “ gear” gets impacted when you have retracts ?
I'm confused, as I usually am by Horizon Support. Are we adjusting SAFE mode or the AS3X system. When you opened the manual I saw nothing relating to AS3X, just SAFE. In a recent phone conversation with Product Support the person I talked to about AS3X had no idea who Mike Lee is and when I shared the information regarding this video with them they were not helpful.
My t28 seems to have a 2 step safe... safe and giro
How about doing it when you have gear to use !! all my planes have retracts !!
Reassign the switch as Mike mentions at the end. He says it can be assigned to the knob for variable gain, but at the beginning he tells you it can be assigned to any open switch; and that a two position switch is best.
.
From what I understand this video is totally wrong you would have to Bluetooth the ax 3x to a phone on iPad and adjust threw the app you do not adjust from your radio
Amount of authority? What do you mean?
Dont you mean SAFE?
Mike, can this be implemented with the AR636 Rx (SAFE SELECT) that has both SAFE & AS3X? My Tx mode switch controls SAFE ON or OFF, and AS3X is always ON. Can I setup a switch to turn AS3X ON & OFF while leaving the SAFE ON/OFF switch and functions as they are?
In order to set the AS3x ON/OFF in my models, I have the fly modes assigned to switch "H" (I only use two fly modes: FM 1 NO gains; FM 2 gains). You can do this from the AS3X screen on your TX. I don't use the safe function so, I can't comment on that one....
Hint: On the receiver(s), I have all the Rates set up at 100% and the Expo at 0%, that way I can adjust these parameters from my TX. So, AS3X on/off in "H" and H/L rates in "C".......
Hope you figuredvout how to eliminate the beep on the wheel as you scroll. I have to reset my Maule as3x, it doesnt work
It's under the transmitter setup settings. What transmitter do you have?
This information is ALL wrong.... his not doing anything with the as3x. Also, it seems like he thinks his adjusting a gyro or something but his messing with the SAFE system... don't listen to what his saying.
Yes...what if you have gear retracts with a DX6....got me stumped
buy a new radio........fool....!
100% 0% -100% -100% is nothing and 0% is 50% gain Did I understand that right?
This is for the gyro, not safe. Very confusing.
This AS3X was soooooo not needed I pist away $100 for a micro Spitfire. Right at take offit would not respond to my control inputs.
It would partially respond then suddenly do it's own thing.
Less then 30 seconds of flight it crashed and I was out my money.
SORRY BUT YOU GUYS MESSED UP BIG TIME AS3X IS NOT S.A.F.E. !!!!!!!!!!!!!!!!!!!!!!!!!!
THIS DUDE HAS NOTHING TO DO WITH HORIZON HOBBIES !!!'
WHY WONT YOU FIX THIS, WHAT A WASTE OF TIME. YOU REALLY MESSED THIS UP, YOU CANT EVEN ADMIT YOUR WRONG?
Help..... f*^k.... 🤬🤬🤬🤬🤬🤬💥
How do we activate AS3X...?
Someone needs to do a “From Scratch” vid
FIX this blatant error
This video sucks, just figured out how bad, dont use this guys, just dont.
TRIM YOUR FINGERNAILS MAN!!!! JESUS
lower the beep.