Sundown Audio SFB-5000D Amp Dyno
Вставка
- Опубліковано 6 січ 2020
- Get your Sundown Audio hoodies and tees here
sundownunofficial.com/
Follow us on Instagram @sundown_audio_unofficial
/ sundown_audio_unofficial
Make sure to Like and Subscribe!!!
#sundownunofficial #sundownaudiounofficial #sundownunofficialdotcom #sundownaudio #sundown #projectspl #amptesttuesday #woofertestwednesday #techtimethursday - Авто та транспорт
Thanks for the video. I’m glad amp test Tuesday is back! Stay blessed!
I can dig it! A lot of power in a small package
Oh, yeah!!! Its definitely gonna be copped by me!!! Great video brotha
Like always.. great produce... Can't wait to see what is next
Bad ass!! I can't wait to see the SFB 8000!!!
Would be nice to know the amp draw. This way I would know if I could power it with the other stuff in the car. As always it would be better if D wiz was the test one.
Gotta be upwards of like 600amps lol
I like there bass knobs!! Especially the one for the sia3500 it's nice!!
Can't wait for theses amps to ship out when I saw the certified number I went to down4sound and pre-ordered my SFB5000.
Another great video thanks Derrick
Such an awesome amp.im ready to see the 8k
Hell yea yalls products always produce and give customers what they want and they know it without even thinking twice.The faith and trust is there I personally haven't had the pleasure of owning anything sundown but "game recognize game" and that jus speaks for itself keep it up and happy new year to you guys 2020 is starting of right for yall.
I just got this one today and oh my god Ita everything I’ve been looking for get one you won’t regret it
Been a subscriber since you started this channel. Great little amp. Sundown audio ftw!!
Thanks for the support!
@@UnofficialAudio always will , and as soon as I get up a few extra bucks I will be repairing my blown saz3500 v1 that burned a bunch of fets on the power supply side for no reason. I have used this amp for a long time and love it, it pushed my sa15rev2 nicely.
Sundown is one of the best all time goat beazt
I love it bad ass!!!!
Nice, I’ve got a 5000D going on Eight 6.5” in a Bandpass.
Awesome video. I like how you can daisy chain off that amp that makes for shorter runs, shorter runs are always better.
slightly odd question, do you use negative terminal disconnect on your bank setup?
They on sale right now!!! Down4sound
@Brennan Blackmon they sure are. I just ordered the SFB 5000D amp on Thursday. So it should arrive this coming week. For only $375.99 & free shipping I couldn't pass up that deal, I had to order it!
Plus it comes with a free t-shirt, free volt meter & free stickers. I'm a sucker for a good deal lol 😆
@@itdoesntmatterwhatyourname6128 where did u get the amp from? What website
i missed it damn
@@owenrook6467 car audio seems to go on sale often. If you are in no rush then you can catch a great deal again just keep your eye out.
Thanks for the update derek. I loved the way you explain things. I know for a fact that it can do more then rated power. I wanted to let you know the video was glitching. Thanks for sharing man.
I am curious. While doing the dyno runs, why did you go from track 12 on the head unit to track 4 between the different ohm loads? What is the difference between the two tracks, and how does that affect the dyno.
Don’t ever get me wrong I love what you do and you’re good at it. Just D wiz gives a little more information that is important to us.
Big D does a great job
@@UnofficialAudio I just ordered a SFB 5000D amp on Thursday. Will be my 1st experience with a Sundown full bridge amp. I'm just hoping it performs as well or better than my Taramps have, if so then I know I'll love my new SFB amp!
Anxious to see how Chinese full bridge amps hold up during back to back songs w/heavy bass. Thanks for the video Derrick!
@@itdoesntmatterwhatyourname6128 How do you like the amp so far sir? I'm looking a getting one myself.
@@mac4782 I don’t think they have enough capacity. It’s a blurp amp
Great i was wanted to know does it run continuously on 2ohm and 1 ohm when it gets hot
Big D Wiz just gets straight to the dyno after giving specs.
Planning to run 1 of these to a 12" v4 nightshade in about 3 cubes vented at 32hz! yah buddy!!!
Have a question concerning the current draw on this amp. I've been using this amp for about 6 months now and it powered four Alpine swr-10d2 in a 2.4 cu ft sealed enclosure. When playing music and there was a bass track, my system voltage would drop to 10 volts or so. I have recently replaced these subs with four X8v3 with upgraded coils in a 2.9 cu ft ported box tuned to about 25hz. I have noticed that the current draw is significantly less. System voltage only drops to about 12.5 volts and that is only during an extended bass track. All of the speakers are dual 2 ohm wired in series than all four in parallel to present a 1 ohm load as before. Charging system has mechman 270 amp alternator and 2/0 power and ground. Just wondering if the lower power draw is normal for this amp when switching from a sealed box to a ported box. This is my first time using a ported box, have always been a diehard sealed box basshead until now.
What did you used to make it so you could get 4 power cords connected?
tell us moar about the sundown HOME audio that jp mentioned in that video with those really sweet enclosures, plz desu
Would this amp do well with a single 12" v4 nightshade?
I wish I could find a 2nd sae 2000. If I did how do you think this amp would compare to 2 sae 2000s
Unrelated, but whatever happened to the Sundown Audio SA earbuds that were supposedly in the works a year or two ago? Any word on those?
How this compare to the salt series if you still getting rated power @ 1 ohm from both series.
What size fuses does this reccomend
Up date on the salts 4k or 6k not sure which one i need
well i would definitely like to know what she runs uncertified at 1ohm derek!! please and thank you!
Can you test a sundown sia 3500d amp. I would really appreciate man. You guys rock.
OK 👌🏻👌🏼👌🏿👌🏾
I Missed that by 3000 Watts. LOL
i'm more impressed by the SFB-3000's power.all the SFB's are nice little power houses. they pull a shit ton of current the charging system upgrade will cost more than the amp's lol
I am trying to decide between this and the Taramp 5000 smart bass.
Am curious as to what electrical is required to maintain 14.4v on this in order to get the watts you pay for?? 240a alt? 300a? Cap bank? Agm 3400's?? Anybody wanna give me a clue?
do these amp do ok 15v up..?
What size fuse can it take?
Does anyone think it will give my sundown x 15 good power at 1 ohm.
Are these more reliable than the Taramps?
I'm glad the 2 ohm test was at 14.2 volts cause that's where my car sits at (14.0-14.2)
How many amps does it draw when running at 1 ohm
Bought a sfb5000 from their scratch and dent sale. Worked till it didn’t. 2 months. When I power it up, the clip light stays on with no input. Trouble shooted everything. Clip on W/ no protect light = dead. Running 2 x-15
On Willistons channel he did the same Dyno with same amp and it read 5781..my question is why such a big gap ❓ do these dynos need to be calibrated
What's the absolute max voltage setting can this 5k can handle safely?
Where can you buy this? Amazon doesn’t carry it
I got a sundown salt 2k. What's the difference between that and a sfb 2k? Salt amp is more clean bass? I mean what?
I want to know if u can run this amp at HALF OHM
What's the current draw on those?
HOW ABOUT PART 2 OF THE NIGHTSHADE TEST?????
mase720 thank you!!!!
I just don’t get how everyone else isn’t asking for it. Numbers must have been low
I can't find part 1 of Nightshade test. Can someone post the link
@@mase7207 years now we all waiting, feels like i wont buy another until i see results
i asked him about the video awhile back. he said its part of some video tried searching for it nothing
Have you considered using a clamp meter to show current draw while testing the way Ryan and Big D do?
Yes and in some videos I have but it's kind of a pain with the clamp we have right now. Need one of those fancy remote display versions and then it'll be added to every video.
so what was the current draw?
That is a cold amplifier! It gives more power than some of the larger amplifiers and that thing can almost fit in my pocket. Lol
Wait..... this is the official sundown channel 😯
Can this play a night shade 12
I bought the 5k and when I took it the thing play highs through my u 18. Can you show how to set the controls. No sub sonic.
Make sure your low pass filter is set properly. And subsonic should be set low.
I have a tech question as far as the low pass filter will any vocals come out of it when I put a sub on of any size on the this SFB amp with the low pass set all the way down to its lowest point thanks
This amp can be used as a sub amp utilizing the low pass crossover to only play sub frequencies.
@@UnofficialAudio Ok awesome thanks
Do both sides of the power terminals need to be connected or can I use just one of the negative and one of the positive terminals?
Run both. I own this amp, I have single runs (1/0 OFC) to each terminal (2 power, 2 ground) without any power issues at all. Makes the single Zv5 very happy.
Hey I have a question!!!! On the SFB 5000 there is only a single input RCA and a single output RCA. I have two RCA coming from head unit like most everyone does. I notice in this video you also have two RCA connected. Do I only use one for input or just plug in both? I’m lost!
One is for strapping I believe
Do I have to use both inputs?
Do you have to run 2 hot wires and 2 ground, or can you just use one sidr?
Run both sides.
My amp turns on but it's stuck in clipping mode????? The clip lights is stuck on. Anyway you could help or ideas??? Thank you Louis.....
What's the current draw at 1ohm
Beat it
Can I run my subs at .5 ohms with box rise it will be around 3ohm so it won't be. 5 just subs wired to. 5 I'm running to two skar evl d2ohm 15
Yeah go ahead and do so lol
Why not a .5 ohm run?
Any reason why the subsonic filter was omitted? Just to keep cost down?
The high pass filter is the subsonic filter on a full range like this.
Sundown Audio unofficial appreciate the info
I'm assuming you can run the other 12v. remote to another amp if the voltage is high enough?
Or is that not recommended? I can imagine someone will want to try it.
2ΩINFJ CD5 he literally says you can
@@kevinlechner7722 oh. I don't know how I missed that. Well.. Now there's conformation in the comments too.
Oh.. @ 2:29. I wonder if I was typing my question as he was answering my question? Anyhow, thanks for pointing that out.
Should have shown amp draw and did a run at 12volt just for comparison. I've seen some amps do rated RMS at 12 volts which means they are way under rated at 14volts .
I got mine 💪🏾
You like it, I bought mine today
How are they running ?
@@ShaqBrown2x I got the Sfb 5000 on 2 12inch nemesis colossal series and that shit is competition quality I can’t turn it all the way up it hits too hard bro
@@SuperGiovonni that’s beast bro 🔥👌🏾. I might get it for my FI 18”
Would have liked to see it doing about 2500 at 4 ohm and 4000 at 2 ohm........ It did well though . I like to find D class amp at around 13 cents a watt at the 2 ohm mark . So paying around 450.00 would be a great deal on this amp
But in reality we NEVER get 2 set price. No tells manufacturer what it should cost. If to much try Dual Audio at local Walmart!
Anyone know if these are 16V stable?
How efficient are they?
Check out the latest sfb-1000d dyno video for the efficiency test. All the SFB series do really well.
So it's OK to hook up both RCA's as inputs? Even if one says IN and other says OUT?
Yes both for input or top for input
& bottom for output for strapping / daisy chain....NOTHING BELOW 1 OHM !!!!
@@Dauntless.steadfast.fortitude so basically internally both jacks are connected anyway? Thanks man
@@FortyTwoAnswerToEverything yes Sir you got it
any confusion replay video
What's the biggest sfb amp available? Need the salt 12k power but with the sfb price tag since I'm running a 1 ohm final
There's a sfb-13k in the works now then maybe even a sfb-20k later this year.
@@UnofficialAudio awesome! I'm running 3 nsv4 d1s so I'm at ~ .67 ohm final, think that should be enough?
Don't run the SFB models under 1ohm. You would do better to run 2 amps @ 1.3ohms
I have this amp on 4 x8 v3s. All 4 subs read exactly the same on each coil, my question is why do they read 2ohm final load wired in series? They are dual 4ohm by the way
Box rise
@@billycotham9272 so just installing and wiring them into a box with 0 power going to them, it changes ohm load just like that?
I’m not the one to perfectly explain impedance rise: but anytime you wire up subs you never get exactly what ohm load you are supposed to get. I have x15s d4s and they are d4. So I am wired to 1 ohm but with rise it’s more like 2 or 3 ohm. Search for videos on impedance rise and there are videos that better explain it
@@billycotham9272 it just seems wierd to me because I've had single, double and triple sub setups and they would ohm out close if not right on the dot. Once I went to to a four sub setup thats what messed with my noggin since the other setups didn't ohm out that high. (Within .2 on single double and triple....1 whole ohm on quad setup)
@@tonyv33ee are you testing the ohm at the speaker cup terminal? you could have some added resistance from the wires and your terminal or something. but yeah if you check the ohm on a multimeter with no power and just tap on the cone of the sub with your hand while doing so, the resistance will change even if its not getting power
Please make more videos. There’s no amp dynos anywhere of your SIA line (except one and that one did under the rated power 😱). Please dyno or send an amp to big D to dyno the sia 3500 and 5000
Is it better than s.i.a
Will that amp push a ZV5 15 D2???
Yes it will
Made exactly like Brazil amps. Doesn’t matter where it’s made at. The internals are the same
First
wow that is super small funsized
When can we expect them?!?
The 3000 sfb are out but these are available in April 2020
Commenting through the video. Yes I think this amp will produce power, it's a sundown audio amp. 4ohm I guess 2k and 2 ohm I guess 3.2k.
I was over by 200 and under by 200. Pretty good guess
Oh corrected power I was right at 2 ohm
I vote 4.5k at 1.3 ohm
5.6k at 1ohm
I was right 1 out of 4.
This things going to sell like hot cakes
pff, taramps and soundigital are doing it a lot better
We found the 1 dislike∆∆
@@thatunknownguy2680 is not me! i drop like everytime, even if i don't like the product, the video is good and him too, so ok
I just purchased the Sae-2000 Amplifier last month.
Is that model now Obsolete??
I've been seeing nothing, but SFB-2000 Amplifiers.
I'm really thinking that I bought an Amplifier that was on it's way out, but at Full Price. 😕
I’m pretty sure you have the better amp that you can run at .5ohm. (But not covered under warranty)
These SFB amps are not intended for less than 1 and Jacob was very adamant about it.
@@ThisGuyDrives Thank you for the response. After I purchased my amplifier I really didn't see any New videos of people using, or testing them. All I see are the SAE amps, so I started feeling like I got screwed, because I bought an amp at full price that seems to be outdated. I'm not saying that it is a bad amplifier, because it Shreds. It's like buying the 2019 Corvette Z06 with a V8, and then seeing a 2020 Corvette Z06 a month later with a new V12 motor. That doesn't exist, but I think you get the point. I was worried that the New and Improved SAE Amps would be much better at around the same price. 😉
your good the SAEs are the current models
@@relaxationnation1189 Right on.
Thanks Bruthaman. 👍🏼
just swooped the sae3000. filthy!
To me certified doesn't matter uncertified is where it should matter.
Will this amp push 2 xfl 1244 12s
Yes with no problem.
Fuk!!.. you can run “Frankenstein laboratory !”
With that thing!!..
Larry
Are these full bridge type amps more or less efficient power wise than the class d type? I guess what I mean is how strong does the vehicles electrical have to be since the average person probably only does a single auxiliary battery and maybe an alternator upgrade.
Depends on impedance its driving. They tend to be more efficient into a higher impedance load.
Also...a 5000w class d, such as this is, will draw 500 amps at full output. Be sure your electrical can support a 500A draw.
Any chance you could run this amp or the SFB3k with a D2(1.4ohm) Fi audio sub? It would be wired down to .7. I was always told that's not what the amp really sees, so I was thinking it would likely be at 1ohm or above while playing music and would be ok? I still have 2 other Sundown amps, the old SAX 125.2 and 125.4, and am looking into getting another sub amp after selling my others. I ran the sub before on an SAZ-1500 and an SCV-4000. I wanted to get an SCV-2k or 3k this time around, but noticed they're basically discontinued now.
Dont worry about dcr. If the sub is a D2 you'll be fine.
@@UnofficialAudio Ok, thanks for the reply man.
Send this amp to bigd for better testing
Funny coincidence that their models match the numbers of the taramps md models, lol
Also matches some our past and present models of amps too.
3am crew where yall @💪💪💪
Its 6am.... not 3am. Lol
Then i am first on the west coast 🥳
@@Finga_Trappa 😁
The problem I have with chinese built amps is the longevity. They can be 3 times the power but, if they only last acouple years its not a deal.
Does the mid/vocal sound quality change after a certain size amp? I have a 3k and im very impressed with how my mids sound on it. But im concerned that an 5k or 8k wont sound as good as the 3k. I know some other full range high power amps dont sound the same as their small models.
if you neeed 5 or 8 k on your mids you need to get your head checked
@@skateboardkid420I need a clean ~3k at 2.7 ohms. So a 8k would be good I think. Right now my 3k is wired to like .6 so I need to get the same power I have now but at a much higher impedance. So sfb 8k.
@@skateboardkid420 haha thats funny
Nice ! Is this amplifier. 5ohm stable
Do not run this amp below its lowest rated 1ohm impedance. If you want to do that you should get a new Salt series amplifier.
When will the salt series be released
No
I need 2 sfb 5000
M first time installing dual inputs I touched and blew 600 amp of fuses
How'd it do THAT with the batt disconnected?
It was hot ... tight install and my fuses are underneath my enclosure platform, I know it’s not the smartest to have those fuses not readily accessible but hey