@@beavisjj Unfortunately, my website is experiencing an issue & i'm actively working on it right now to fix it. If you're in the USA, you can text me for a quote: 702-670-2711
Another good repair, Thanks for the video. In my experience, I have repaired quite a few iPhone 11 boards, mainly for that no signal issue that stems from certain caps on 2-3 specific lines shorting or partial shorting causing it to be searching all the time, but that aside, I have found that those boards are very heat sensitive, they use 138 solder from the factory so, you only need to go to about 150c or so to split it safely. I found that sometimes if I reballed them with 183 instead of 138 and I had to heat the board to 200c to have the half's solder back together, I found in about 1/5 cases, the baseband would end up with cold solder. However, using a good quality 138 solder, and heating to 150c i found in over 100 iPhone 11's I have never had a cold solder issue under the baseband and issues related to the bottom board again. It just kinda scared me when you heated it up at the start so hot. On another note. When it comes to removing that plate, I find it is much safer to just use a rotary tool of some sort, and as long as you are very careful not to press too hard, or scratch the board or any components, it works very well. I guess the only trade off is, you have no plate left to solder back on there.
Yes, I've been fixing these for years on a regular basis. I understand how to handle the heat on them. Never had an issue as you described. To each their own
@@VCCBoardRepairs Absolutely, To be clear, I wasn't criticizing your work, You do a very professional job, I have been watching for a long time now, I have seen the quality of your work. I think there are a lot of technicians out there who watch these videos to learn how to solder, and I think it is important to share our stories and experiences so that after they have watched the video, they can read the comments and perhaps be encouraged to share their own To be honest the issues I was referring to are long term, say 3-6 months down the track. A lot of the devices I repair have been sold, and come with warranty for 1-2 years, which is where I can see the issues come back over time, in the short term there is no issues to worry about. Any way, as I said the first time, Another great repair, Thanks for the video. And I will add too, Please keep making more, I love to see them
what if your shorted component was on the bottom board? can you manually inject power to still use the thermal camera to identify the overheating component? multimeter probes perhaps?
Good video ❤ I have a similar issue! iPhone 14 Pro Max shut down suddenly why it was 3% charge I am wondering what the issue might be and if you guys can fix it ! Now it’s not turning on or charging and also I had issues charging it with a third party cable from apple
@@VCCBoardRepairs when i click on more it shows description, transcript and few links to your youtube homepage. there is almost nothing. no other info. i must me doing something wrong. i am desktop. youtube layout changed yesterday. im going to investigate more. thanks for reply. i think youtube eFd something.
No longer available. Get this instead ⭐ Mechanic Boot Cable Box: www.injuredgadgets.com/mechanic-power-pro-max-boot-cable-w-15-fpc-connectors-for-iphone-6-up-to-13-pro-max/?acc=3d2d53e5abcd70e24cc444935b88e6ac21
Sir i want to say u plz Upload a full course for mobike reparing no body teaches Mobile reparing for free they all cost so much plz 😢 its my request sir
@@VCCBoardRepairs What else does it provide that I'm missing (just curious)? The price is quite high which is why I'm asking. I looked at the product, couldn't really find any other advantage...
i am facing an issue of whatsapp chat. i got the same folder with all the whatsapp files. But i need to backup the whatsapp from that. Please kindly help me sir
Phone maintenance professionals in Iraq make a lot of money. What about you in the United States? Is it a perfect job? How many phones do you repair per day? What's thier issues
hello sir my neme is Mohammed hoesn in living in use now I like to work with you. If you need it. as assistant and I would like to learn to you. more about fixing in phone I work before in Bangladesh 2007 to 2017 in mobile repair shop. I would like to learn more.
Do you need your data recovered? Send me a message for a quote: vccboardrepairs.com/contact
Hi, I had tried the link and says"account suspended"
@@beavisjj Unfortunately, my website is experiencing an issue & i'm actively working on it right now to fix it. If you're in the USA, you can text me for a quote: 702-670-2711
Network issue diagnosis
Thank you. I am following from Thailand.
Thank you! Appreciate the support!
You've earned a loyal viewer!
Thanks for sticking around, you're awesome!
You work amazingly it's very nice to watch you. Can you do videos on how to replace charging ports and connectors on the board
I have many videos on this topic. Search my channel to find them 😀
Another good repair, Thanks for the video.
In my experience, I have repaired quite a few iPhone 11 boards, mainly for that no signal issue that stems from certain caps on 2-3 specific lines shorting or partial shorting causing it to be searching all the time, but that aside, I have found that those boards are very heat sensitive, they use 138 solder from the factory so, you only need to go to about 150c or so to split it safely. I found that sometimes if I reballed them with 183 instead of 138 and I had to heat the board to 200c to have the half's solder back together, I found in about 1/5 cases, the baseband would end up with cold solder. However, using a good quality 138 solder, and heating to 150c i found in over 100 iPhone 11's I have never had a cold solder issue under the baseband and issues related to the bottom board again. It just kinda scared me when you heated it up at the start so hot.
On another note. When it comes to removing that plate, I find it is much safer to just use a rotary tool of some sort, and as long as you are very careful not to press too hard, or scratch the board or any components, it works very well. I guess the only trade off is, you have no plate left to solder back on there.
Yes, I've been fixing these for years on a regular basis. I understand how to handle the heat on them. Never had an issue as you described.
To each their own
@@VCCBoardRepairs Absolutely, To be clear, I wasn't criticizing your work, You do a very professional job, I have been watching for a long time now, I have seen the quality of your work.
I think there are a lot of technicians out there who watch these videos to learn how to solder, and I think it is important to share our stories and experiences so that after they have watched the video, they can read the comments and perhaps be encouraged to share their own
To be honest the issues I was referring to are long term, say 3-6 months down the track. A lot of the devices I repair have been sold, and come with warranty for 1-2 years, which is where I can see the issues come back over time, in the short term there is no issues to worry about.
Any way, as I said the first time, Another great repair, Thanks for the video. And I will add too, Please keep making more, I love to see them
Excellent and clear work, well done
As always Jesse... # 1 🎉❤
My pleasure! Happy to hear you're enjoying my channel!
Clean job thanks for sharing 🎉
Thanks for watching!
The 3 lines are the intial lines after the battery connector and they are input lines up to pmu.
Correct
Great job Jesse!!!
Your support means a lot, thank you!
what if your shorted component was on the bottom board? can you manually inject power to still use the thermal camera to identify the overheating component? multimeter probes perhaps?
Yes. I have videos on that as well
Can you share that link?
@@iphoneanakart8034 just browse my channel. most of my videos cover this
I always watch your best video thanks ❤
Thank you! Appreciate the support!
Excellent work. Thank you for sharing.
I really appreciate your support. Thank you so much
You are really good working...I like it
Good video ❤
I have a similar issue! iPhone 14 Pro Max shut down suddenly why it was 3% charge I am wondering what the issue might be and if you guys can fix it ! Now it’s not turning on or charging and also I had issues charging it with a third party cable from apple
Yes! We specialize in board repairs, as you can see in my video. Send me a message for a quote: www.vccboardrepairs.com/contact-us
Good work boss thank you
Thank you! Appreciate the support!
there are no links to tools in the description in the new youtube layout?
There is. On desktop, it's on the right side
@@VCCBoardRepairs when i click on more it shows description, transcript and few links to your youtube homepage. there is almost nothing. no other info. i must me doing something wrong. i am desktop. youtube layout changed yesterday. im going to investigate more. thanks for reply. i think youtube eFd something.
Bro where did you buy your single cable? The blue color?
No longer available. Get this instead
⭐ Mechanic Boot Cable Box: www.injuredgadgets.com/mechanic-power-pro-max-boot-cable-w-15-fpc-connectors-for-iphone-6-up-to-13-pro-max/?acc=3d2d53e5abcd70e24cc444935b88e6ac21
I've never seen a video of a dead mobile with 0.00amp draw on usb meter . Could you please share , what could be the problem?
What blade brand do you use to remove the underfill?
I personally use quian li mega idea brand but literally any x-acto or similar blades work well.
Good Job
Thank you! Appreciate the support!
Sir i want to say u plz Upload a full course for mobike reparing no body teaches Mobile reparing for free they all cost so much plz 😢 its my request sir
my channel is a full course. watch every video sir
I don't get why that mechanic power pro mmax is needed? Can't you just use your power supply directly and ramp it up slowly?
And how would you connect the DC power supply to the board?
@@VCCBoardRepairs custom cable
@bobby9568 the mechanic box is the custom cable
@@VCCBoardRepairs What else does it provide that I'm missing (just curious)? The price is quite high which is why I'm asking. I looked at the product, couldn't really find any other advantage...
I have a dedicated video on it on my channel. Also, it's like $40. Not expensive at all
Do you need any assistant? I like to work with you
I don't
i am facing an issue of whatsapp chat.
i got the same folder with all the whatsapp files.
But i need to backup the whatsapp from that.
Please kindly help me sir
I need nand programmer which one will you recommend for me
JC V1S Pro
@@VCCBoardRepairsthat’s too slow
jesse i want to buy sugon 8610dx hot air station do you recommend me to buy please
Quick 861dw best
I've never used that. I prefer the Atten ST-862D over the Quick 861DW
super reparation
Thank you! Cheers!
After u took out the bad capacitor u not putting back a good capacitor
Correct ✅
😢 can you repaired my i phone 11 Since 2020 i was using this 😢phone i have lots off data it’s borad problem i am from dubai.how can i sent YOU
Yes, I can! Send me a message for a quote: www.vccboardrepairs.com/contact-us
Phone maintenance professionals in Iraq make a lot of money. What about you in the United States? Is it a perfect job? How many phones do you repair per day? What's thier issues
Yes, I make great money
hello sir my neme is Mohammed hoesn in living in use now I like to work with you. If you need it. as assistant and I would like to learn to you. more about fixing in phone I work before in Bangladesh 2007 to 2017 in mobile repair shop. I would like to learn more.
I'm not hiring
@@VCCBoardRepairs thanks sir
I have never done rebbling and data recovery if want to learn from you what should I do I really want to learn