In New England? Lmao are u crazy? The weather here f’n sucks half of the year, not to mention the plows and drastic change of weather destroys the asphalt
@@dylanroach8612 yea bro Northeast US is mostly terrible for driving, however there are some good rides up in NH and Vermont, but there is a lot of salt on the roads in the winter
I had one of those filters, but removed cause it was causing too much pressure. I was starting to have oil seep out of the oil cap. Just a keep a look out on that. That hose actually relieves pressure and brings in cooler outside air into the crank. But it definitely does look nice. I sometimes miss it haha.
You wont have any issues deleting the AAV. Our Si's still have an IACV that will take care of high idle. You may want to keep the valve cover vent attached to the the intake though. The PCV system pulls pressure from the crankcase better when attached to a vacuum (like the intake) rather than open air. It does look fancy though lol.
i just don’t this last night and currently don’t have the hose connected. i been really thinking about it so here i am found this while checking into it more.. so it’s better connect the hose to the intake?!
So I’m just adding the k tuned breather. All I have to do is put the breather on the valve cover where the large hose is and then vacuum cap the short ram intake where the big hose goes in right?
You can take the whole IAV out and it will still have a high idle when it's cold. If you do decide to put the kit in, make sure to get some teflon tape and wrap it around everything
You need to have the pcv connected to your intake you wont have as much low end torque now. I did a similar mod to my v6 accord but i took it back off for that reason. It draws a vacuum on the crankcase and relieves pressure.
@@TheGerbsteve never mind .. I wonder if I should go back myself. I put my breather on the same time I did my head.. haven't drove it alot so I think ima do the same see if it feels like I have more power
Is the breather filter washable? I just got mine. Checked on their website but zilch..... Material doesnt look like washable K&N type cotton gauze though...:/ anybdy tried washing it?
Erm you are sticking a Crappy Valve cover filter/restriction In place of the Designed PCV system. Where intake vacuum evacuates the crankcase blowby.. Genius level work there... Expected I suppose.. from someone who has their v own scrap yard.
So you added a breather. The blowby is now venting into your engine bay instead of into your intake. Doesn't that make everything greasy? Also, why didn't you just install a catch can which separates the oil vapor before it goes back into your intake?
I have a 07 I’m looking to do some mods what do you think I should start with it’s all stock ,, an thanks for taking the time to write back ,, much love
i went to vip n got a brass plug send it lol i heard new england from maine myself also wondering how my dc5 will start this winter lol and why no cold air intake ???? got mine from amazon $30
i done the bypass last night and didn’t have a vac cap to go in the new intake so i used it without a cap for 10 minutes... i didn’t damage anything did i? i’m now reading comments and seeing i should re connect the hose to the intake?
Gerb Productions Indeed it is man.. I work at Liberty Honda of Hartford bro.. and I been thinking of getting an FA5 or a 350z Next year. Dont stop making videos man🔥
Eyyyy I was wondering if u was going to get one! I have one thought it made it look good . Little flashy whistle and hose delete.. I noticed when I put mine on a increase in heat especially under the valve cover. Hondata I'm hitting up to 203 sometimes but levels down and runs good still.
So what was the other hoses that you deleted ? You said something about making it warm up faster , does that do anything too it ? I just ordered a one of those breather ports
Only thing I might delete fully is the idle air assist valve. You do not want to remove pcv hose from valve cover to your intake. It is responsible for a few important things. My car was running kind of crappy
I tried the breather catch can on my si and I felt like at first it was good and the power was better. But then I noticed my gas sucked afterwards. I had it for about a week...maybe the results will be different with you. I dont know lol let us know in another video please. 8)
@@TheGerbsteve thanks man! im doing a k24 swap on my fg2. also have my FBO ready. wanna go e85 as well. i still need to purchase hondata. if you're ever in NC we should meet up to do a video!
Get eBay cold air intake they’re 40 bucks shipped lol they are exactly the same as the Injen cold air intake. I just put mine in today and I came from a fujita short ram. I loved the sound of short ram but the cold air is way deeper sound and seems to pull harder. Too bad I don’t have a flash pro yet to actually get gains
Cell phone holder
www.amazon.com/gp/product/B07KQTTSXH/ref=as_li_tl?ie=UTF8&tag=gerbproductio-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B07KQTTSXH&linkId=682775dd3068a19aa93a1ebf3dc75c66
You can see how much he loves his car with all his little smiles and the excitement you hear in his voice every time he talks about it.
;)
oh shit mt eden!
gona leak oil out the breather but does help with idle n gas issues...
I ended up not liking it, so I stuck my hose back on her
"It's an Si, that's why" LMAO
hahaha
Where was this? I recognize the area.
Engine bay looks good. Its amazing what such a little mod can do..
It looks great, but unfortunately I put my stock hose back on. I will update all of you soon
The weather there is so nice for driving, i have a 240 whp 8th gen
In New England? Lmao are u crazy? The weather here f’n sucks half of the year, not to mention the plows and drastic change of weather destroys the asphalt
@@zodspeed Damn. Sucks for you. Lmaoooo, this Cali weather hit different 😎
@@dylanroach8612 yea bro Northeast US is mostly terrible for driving, however there are some good rides up in NH and Vermont, but there is a lot of salt on the roads in the winter
I had one of those filters, but removed cause it was causing too much pressure. I was starting to have oil seep out of the oil cap. Just a keep a look out on that. That hose actually relieves pressure and brings in cooler outside air into the crank. But it definitely does look nice. I sometimes miss it haha.
Yup... My car wasn't running right. I put the stock pcv hose back on, r.i.p k tuned breather
was looking for a comment like such.... in racing there's horsepower to be found if you can pull a vacuum in the crank case....
What was that thing called you put on the right side of the valve cover ?
Wiretucks work wonders! Super Clean Looking btw!
アレキサンダー 佐藤 I'll have to check em out.. thxs
Definitely going to do a wire tuck in the near future 💪🏼
Also, Literally, Literally, Literally, Literally, Literally, Literally, Wicked, Literally, Literally, Literally, Motr.
Bro ima do this to my 2009 tsx, it’s time I start to make it look nice haha thanks bro I’ll update you( if you care ) but you just earned a sub haha!
Appreciate you 🤙🏼
You wont have any issues deleting the AAV. Our Si's still have an IACV that will take care of high idle. You may want to keep the valve cover vent attached to the the intake though. The PCV system pulls pressure from the crankcase better when attached to a vacuum (like the intake) rather than open air. It does look fancy though lol.
Yup, found this out the hard way.. My car was running like crap. R.i.p k tuned breather
What you guys mean by this? Are you saying there is no reason for ktuned valve cover breather?
i just don’t this last night and currently don’t have the hose connected. i been really thinking about it so here i am found this while checking into it more.. so it’s better connect the hose to the intake?!
yep def new england think ive been to that exact store if not it looked just like it lol
Middletown
@@TheGerbsteve am wrong but it looks jus like portland or scarborough maine
That 10th gen 😂
So I’m just adding the k tuned breather. All I have to do is put the breather on the valve cover where the large hose is and then vacuum cap the short ram intake where the big hose goes in right?
Nice video man keep them video coming #HondaGang #K20 #JDM
Thanks my boiii #hondagang #hondafam #k20z3
You can take the whole IAV out and it will still have a high idle when it's cold. If you do decide to put the kit in, make sure to get some teflon tape and wrap it around everything
Good point bro
What the benefit of doing it power wise
“Its an si thats why “ 😂 loves the vids bro keep it up !!! Always come here for some help
Thanks bro! More coming for you soon
“STOP YELLING GERB!” “CAN THAT ZOOM IN?”
Backyard Mods for the almost 2 years I’ve been filming for him you’d think I know it can’t zoom in 😂
Haha hey this stuff happens!😂
Aftermarket fuel rail would be dope
Been looking into them ;)
You already know ;)
You need to have the pcv connected to your intake you wont have as much low end torque now. I did a similar mod to my v6 accord but i took it back off for that reason. It draws a vacuum on the crankcase and relieves pressure.
Facts
Found this out the hard way. I was like wtfff. R.i.p Ktuned breather lol
@@TheGerbsteve never mind .. I wonder if I should go back myself. I put my breather on the same time I did my head.. haven't drove it alot so I think ima do the same see if it feels like I have more power
That is not the pcv it’s just a valve cover breather
Our pcv it on the other side of the manifold. Little vacuum hose by the idler pulley
Is the breather filter washable? I just got mine. Checked on their website but zilch..... Material doesnt look like washable K&N type cotton gauze though...:/ anybdy tried washing it?
k20 engine bay jdm bolts secured
Build still going strong 💪
How you been guyyy
Erm you are sticking a Crappy Valve cover filter/restriction In place of the Designed PCV system.
Where intake vacuum evacuates the crankcase blowby.. Genius level work there... Expected I suppose.. from someone who has their v own scrap yard.
So you added a breather. The blowby is now venting into your engine bay instead of into your intake. Doesn't that make everything greasy? Also, why didn't you just install a catch can which separates the oil vapor before it goes back into your intake?
Si for sure
Bro the valve cover looks amazing,, 😍
Thank you ;)
I have a 07 I’m looking to do some mods what do you think I should start with it’s all stock ,, an thanks for taking the time to write back ,, much love
Good intake, header, + flashpro for starters will do you good bro ;)
Did it make any difference?
Nah, made my car run a little funky
the wrx is better but honda is never a letdown.
Put a spacer 1" thats more looks agressive and sweet😘😘
What size is the filter? Ive been trying to find one but dont know the size
Unfortunately, I don't have the size. You may have to check some forums or what not
Forgot to say keep Wrenchin
Never Stop Wrenching ;) haha
Noob question but what's the little filter for and what gains you get from it?
i went to vip n got a brass plug send it lol i heard new england from maine myself also wondering how my dc5 will start this winter lol and why no cold air intake ???? got mine from amazon $30
Hey I’m form Ohio as well down in west Chester are there any local Honda car events or anything I’m missing out on I have a 9th gen coupe si
Your closest meets would probably be HDAY or your local car clubs man
What’s the name of the delete kit?
i done the bypass last night and didn’t have a vac cap to go in the new intake so i used it without a cap for 10 minutes... i didn’t damage anything did i? i’m now reading comments and seeing i should re connect the hose to the intake?
I been to that harbor freight before lol
Small world bro 🙏🏻
Gerb Productions Indeed it is man.. I work at Liberty Honda of Hartford bro.. and I been thinking of getting an FA5 or a 350z Next year. Dont stop making videos man🔥
I was just there a few weeks ago grabbing coolant lol... You should pick up an fa5, they're sick, but so are Z's. Thanks for the love
Eyyyy I was wondering if u was going to get one! I have one thought it made it look good . Little flashy whistle and hose delete.. I noticed when I put mine on a increase in heat especially under the valve cover. Hondata I'm hitting up to 203 sometimes but levels down and runs good still.
I had to take mine off.... R.i.p k tuned breather
@@TheGerbsteve why?
$2.75 for gas at that station...take us back to 2018!
OBVIOUSLY THE CIVIC IS MUCH BETTER THAN WRX
Why u quit, that line in the manifold?
Dunno k tuned parts don't come in bags . K tuned parts come in boxes and shipping is in an box . Now if you're buying fake Ktuned it might
Yo what’s the song at 9:42 ?! I’ve heard it before but can’t Remeber what it is!!!!
So what was the other hoses that you deleted ? You said something about making it warm up faster , does that do anything too it ? I just ordered a one of those breather ports
Maybe one day i see you in that store I always go there✌️
Does the K-Tuned CMC kit work really well?
Honestly, I freaking love it. Smooth + quick shifting. Make sure you get a stainless steel line combined with it.
I just ordered a new cmc about a month ago or so. K Tuned was sold out so I went though hybrid racing. They also have the stainless cables.
Brandon Good are the Ktuned and Hybrid Racing similar? I need kne for my k series build. Not sure what to get.
@@WelshyAutomotive get ktuned if u can
Gerb where did u get the stainless steel line?
How much for one of those K-Tuned air breather filters?
Paid like $20 something for mine
What part of new England I live in Rhode island I need some help with my k20 z3
Arion Ortiz I’m in Connecticut... what you with the z3?
How’s it holding up after a year? Been thinking about doing the same to mines.
I ended up taking the filter off man, my car had a weird idle
So, is no good idea take out PVC. Conected in the intake and manifold
Only thing I might delete fully is the idle air assist valve. You do not want to remove pcv hose from valve cover to your intake. It is responsible for a few important things. My car was running kind of crappy
Only air intake bro , Where did yo u put the filter ktuned, the other hose is fin e, because i take it out. My car gain hp
I tried the breather catch can on my si and I felt like at first it was good and the power was better. But then I noticed my gas sucked afterwards. I had it for about a week...maybe the results will be different with you. I dont know lol let us know in another video please. 8)
You will all be getting updated soon bro ;)
10th gen civic is the best
You think so?
Yup especially the coupe
what app is that on your phone that reads you the rpm's and everything lol
Hondata mobile
@@TheGerbsteve thanks man! im doing a k24 swap on my fg2. also have my FBO ready. wanna go e85 as well. i still need to purchase hondata. if you're ever in NC we should meet up to do a video!
The plan is a k24 swap for my fg2 as well 😎... I’ll be coming down the first week in May 🤙🏼
I want that coffee
It's litttt
Bro i just got the breather
It’s a trouble if I leave it ?
You have to take it for a drive with it and see how it performs. I didn't like mine.
What is that intake on the engine cover
For?
Ibrahim Sidibay it’s just a valve cover breather, let’s pressure in and out
usualy its a air intake to cool a intercooler for a turbo
So the oil goes into you throttle body . Delete it all run hondata problem solved
I broke mines as well it cost me around $200 from the dealer smh air assist smh
$200!!!! ?
dog why does your house look exactly like mines 😂
Do you have crap everywhere as well lol???
Fa5 looks better then both lol.
I hate that you're right
DunDun Symanski nah fg2 with the full hfp kit
Love my silver sky FA5
Had to take back the Like cause u didn’t even race the 10th gen blue civic
lol
Where are you from man
Connecticut man
coming from an FA5 driver, wrx is nicer.
Red Dawn here bro how are you?
Your Honda is better than that piece of scrap metal.
My honda is a piece of scrap haha
Gerb Productions no I'm saying that your Honda is better than the WRX. No way that I would say that I have a Honda Civic Si sedan 2007
Haha... Honda fam stand up ;)
I'm sorry but I'm going to go with the wrx 😂
All good... I’ll probs end up upgrading to one in the future 🤫
@@TheGerbsteve Nice
bro i live in middletown 😂
Small world ;)
I live next to middleton. Used to fish near the fire dept in the back where that lake is
Get eBay cold air intake they’re 40 bucks shipped lol they are exactly the same as the Injen cold air intake. I just put mine in today and I came from a fujita short ram. I loved the sound of short ram but the cold air is way deeper sound and seems to pull harder. Too bad I don’t have a flash pro yet to actually get gains
Todd Sundstrom which one did you get ?
I'm stuck between like 3 intakes right now haha ;)... I've heard the ebay ones aren't that bad at all actually. We shall see what i go with
@@TheGerbsteve I'd reccomend buying a a cheap pipe on ebay for $20 and then buy a genuine k&n filter to get good performence for cheap
@@TheGerbsteve id recommend staying with the stock air box. save your money.
What is all that crap in your yard
You made a video for this...??? Lol
remember, that car blows.... literally lol. talking bout the wrx
We must not talk about that day lol
you use the word cheap all the time.
Because I’m a cheap ass 🤣
Si looks better
Agreed ;)
Si is better
🙏🏻