Ground Up: Building Justin's 240sx - EP.2 Steering & Suspension

Поділитися
Вставка
  • Опубліковано 6 жов 2024
  • Welcome to episode 2 of the Ground Up build series!
    On this episode we are diving into the steering and suspension, where we show you the disassembly/reassembly of the front and rear subframes, and give you a walk through of the parts to be installed. Justin also throws you some tips and tricks along the way to help with your own build.
    We are trying to keep the parts budget low for this car, that way this series works as a great "How-to" as far as the parts you will need to purchase to build a grassroots drift car that you can drive to and from events.
    Check out our website below for parts and accessories. And if you need service done, feel free to email us to set up an appointment. Thanks for watching!
    factionmotorsports.com
    sales@factionmotorsports.com
    FACTION! Drift Club - Low Car Special Sticker
    www.factionmot....
    Video by:
    @dannyheatzmedia (www.dannyheatz...)

КОМЕНТАРІ • 82

  • @-gnicE-
    @-gnicE- 2 роки тому +2

    3/4 impact thick socket on the puller works amazing to push the bushings out.

  • @jdmspirit99
    @jdmspirit99 3 роки тому +1

    Everytime you open a diff and removing parts, you must do bearings preload!
    Great video

  • @slideyboi93
    @slideyboi93 4 роки тому +11

    Part 3 any time soon? I plan on doing this. I already have my subframe out.

    • @guidomonto3742
      @guidomonto3742 3 роки тому

      @Clarissa Latner sure, go try and scam somewhere else.

  • @cadelcadman2795
    @cadelcadman2795 4 роки тому +3

    Man hope you get more recognition quick alot better camerawork and content involved

  • @CoreysZ32
    @CoreysZ32 2 роки тому +1

    Don't know why I didn't think about a pulley puller before for the knuckle and control arm bushings, makes life a lot easier! It's also staggering seeing the full parts layout and how much work/funds went into this... then you realize that was just suspension and probably only ~1/4 of the costs so far!

    • @factionmotorsports
      @factionmotorsports  2 роки тому +1

      I belive we got a rough number for this car without labor and it was around 20-30k not including the car.

    • @coreysmithcoreysz3254
      @coreysmithcoreysz3254 2 роки тому

      @@factionmotorsports THANK YOU. I wasn't subscribed and didn't get around to watching ep3+! I would have missed it if you didnt reply. Sub'd!
      Cheers!
      Also shoutout to the bushing burp at 9:59

  • @NikoShmiko
    @NikoShmiko 4 роки тому +3

    Great video, nice work. very informationing

  • @AdamNZ
    @AdamNZ 3 роки тому

    Good to see good preparation on the engineering side of things.

  • @DannyheatzMedia
    @DannyheatzMedia 4 роки тому +2

    Very nice, well put together

    • @factionmotorsports
      @factionmotorsports  4 роки тому

      thanks, could be better but the videographer is new to this

  • @javiermarcial2650
    @javiermarcial2650 2 роки тому +6

    Wish I had a team like this to build cars with 😖

  • @NLPHC
    @NLPHC 4 роки тому +2

    This thing is gonna be rad. Please keep it red.

  • @JustinJoyinglife
    @JustinJoyinglife 4 роки тому +1

    Just popped up in my feed. One subscriber closer to 1k. 403 here. Keep up the good work.

    • @factionmotorsports
      @factionmotorsports  4 роки тому +1

      Thank you justin!!!!

    • @JustinJoyinglife
      @JustinJoyinglife 4 роки тому

      @@factionmotorsports thank you as well. I enjoy anyone willing to wrench. Even more so to take the extra time to film and edit. Your work is appreciated.

  • @MaxCotton
    @MaxCotton 4 роки тому +2

    Loving your channel. My sponsors are building me a ps13 for the 2020 season. I can’t wait to get behind the wheel.

    • @factionmotorsports
      @factionmotorsports  4 роки тому +1

      Hell yea! Excited to drive as well. This is one of the 5 cars we need to get ready for this season

    • @SuperMaxCarp
      @SuperMaxCarp 3 роки тому

      Bro how can I get sponsors for my bone stock s13? I saved up money but spent it on my wedding instead. Saved up money again and found out we are having twins, they came in very premature and my wife had to leave her job to take care of the twins while I worked. It ain't been easy but I doubt I'll be able to save up money anytime soon for the car. Babies are expensive, but love my twins to death, best thing to ever happen to me outside of meeting my wife. Thanks to this channel for the inspiration

    • @MaxCotton
      @MaxCotton 3 роки тому

      @@SuperMaxCarp Congrats on the twins, thats really cool. Sponsors (or working partners) are not easy to find because nobody wants to give you stuff for putting a sticker on your car. I work 7 days a week for my partners and its becoming more of a full time job even though I am still at school a studying for my GCSEs. If you are interested in how I managed to get lots of amazing working partners I did make a vid in it. good luck and let me know if you have any more questions, I am always happy to help.

    • @SuperMaxCarp
      @SuperMaxCarp 3 роки тому +1

      @@MaxCotton thanks for much. I appreciate the help. Keep doing what you do bro, good luck with school and car career.

    • @MaxCotton
      @MaxCotton 3 роки тому

      Thanks @@SuperMaxCarp 👍

  • @kevinc9934
    @kevinc9934 4 роки тому

    Nice video! Deff learned some tricks.

  • @GTRGarageJapan
    @GTRGarageJapan 4 роки тому +1

    Good stuff.

  • @DafergoEngineering
    @DafergoEngineering 2 роки тому +1

    great video, keep going!

  • @gazcutloose7232
    @gazcutloose7232 4 роки тому

    The right way todo it 👌🏼🇬🇧

  • @Acetuning
    @Acetuning 4 роки тому +1

    Watching Justin makes me go from 6 to midnight

  • @fernandopaulino7318
    @fernandopaulino7318 4 роки тому +2

    Yoooo my homie Ethan comin in all blurred😂 can’t see me!!

  • @carol7288
    @carol7288 4 роки тому +1

    Very well done, boys 🤘🏼

  • @kilburgfilms7951
    @kilburgfilms7951 4 роки тому

    this thing is gonna be siiiiick

  • @Mudbaby22
    @Mudbaby22 3 роки тому

    Diff cover paint? That's cool

  • @HomeIdeasYT
    @HomeIdeasYT 4 роки тому +1

    Good job! :)

  • @RedMonkeLarvae
    @RedMonkeLarvae 2 роки тому +1

    More videos please!!

  • @loscastillo8639
    @loscastillo8639 4 роки тому +2

    Dope video , def going to replicate this on mine this season. What was that technique used with mounting the tires and the inner tube? Yall tube your tires ?

    • @factionmotorsports
      @factionmotorsports  4 роки тому +2

      We will try to post a separate video about that later in the year. Follow our instagram! Its a trick to stretch tires.

  • @JeffGillis-lv1rz
    @JeffGillis-lv1rz 3 місяці тому

    I assume that that subframe going back into the chassis is an S14 as it’s superior to the S13 version, yes?

  • @gwg240
    @gwg240 4 роки тому

    In for the rest of the build!
    plans for engine?

  • @Teeszyn
    @Teeszyn 3 роки тому

    10:00 that burp 🤣🤣

  • @SylasG
    @SylasG 2 роки тому +1

    Why did you guys extend the lower control arms? I thought B Knuckle was designed to use stock control arm length.

    • @factionmotorsports
      @factionmotorsports  2 роки тому

      Just what the owner wanted at the time. As long as the extension isnt over the top in length then you should be fine. I think this extension was a little bigger than S14 OEM length. That being said, I would personally try to keep stock s13/14 arms as well - Frankie

  • @benitamanzanarez3520
    @benitamanzanarez3520 4 роки тому

    Nice content thing must
    Feel like a brand new car aye?

  • @oemplus3613
    @oemplus3613 4 роки тому

    Nice 👍

  • @garnerpetering2953
    @garnerpetering2953 3 роки тому

    Badass

  • @Bkrandoo
    @Bkrandoo 3 роки тому +1

    Hey great video. Is this car done yet??

    • @factionmotorsports
      @factionmotorsports  2 роки тому

      Check our newest video in the series to see where it got left off. Still need exterior work.

  • @iananderson8911
    @iananderson8911 4 роки тому

    Wanting to do a project turbo 240 during this quarantine but I gotta try and convince my parents to let it sit in the driveway😭

  • @rholt7448
    @rholt7448 4 роки тому

    Whats the part number for the rear moog ball joint? Thanks!

  • @FOG-CANOE
    @FOG-CANOE 3 роки тому

    Peep the subie engine in the back… RIP

  • @ybetz02
    @ybetz02 2 роки тому +1

    Excuse me but can someone explain me what these rubber rings are (looks like a Tube for a bike???) what he uses at 8:38 is it because of the stretch? never seen that

  • @mohammadsaud3474
    @mohammadsaud3474 4 роки тому +1

    what camera are you guys using ?

  • @illestk24civic
    @illestk24civic 3 роки тому

    Wouldn’t it make more sense to replace all that oem garbage for pbm suspension components?

    • @factionmotorsports
      @factionmotorsports  3 роки тому +1

      Not if you are trying to stay on a budget and keep everything simple. OEM components are perfectly capable for what we need them to do. This whole series is really about using OEM parts and sticking to quality aftermarket when needed!

  • @abewright4584
    @abewright4584 Рік тому

    Maybe I missed it but what are the wheel specs?

  • @taylorwaud6156
    @taylorwaud6156 4 роки тому

    When you gonna finish this build?

  • @Turbs89
    @Turbs89 2 роки тому +1

    use...a....torch..

  • @illest420sx
    @illest420sx 4 роки тому

    wheres episode 3?

  • @fabianchavez4545
    @fabianchavez4545 4 роки тому

    Where’s ep 3??

  • @jlowery2146
    @jlowery2146 4 роки тому

    what size fuel cell or tank are you going to use? im thinking about putting a 12gallon fuel cell in my s13 but not sure if i should go larger or not. LS2 swapped with T56 trans is getting put into it now.

    • @McGrathMotorsports
      @McGrathMotorsports 4 роки тому +1

      I got a 15 gallon but after talking to a couple pros a 10 gal is enough if its just a track car. It's a weight game.

  • @juniorortega3108
    @juniorortega3108 3 роки тому

    What year is this nissan please

  • @cycosmile3983
    @cycosmile3983 Рік тому

    12:45

  • @frankzane7326
    @frankzane7326 2 роки тому

    move forward steering rack location?

    • @factionmotorsports
      @factionmotorsports  2 роки тому +1

      We did not relocate the rack on this one but that is an option.

  • @rickrojas9564
    @rickrojas9564 3 роки тому

    On episode 100million we restore the 240 to oem lmao 😂

  • @jazmins1330
    @jazmins1330 3 роки тому

    🤙🏼

  • @daneblackburn2803
    @daneblackburn2803 4 роки тому

    song @2:16?

  • @DankySaiyan
    @DankySaiyan 4 роки тому

    When part 3?!!!