U need the can key first And put the pin do not push the green key, push the horn and select using steer forwardn3 times and horn again...in my place the speed about ...forward 75 and backward 70 and il change speed 100 and real damn fast and hard to control..
Code C 28 is not a error code on BT. Its an info that the emergency switch is pressed down. Shut the truck off via keypad,release the emergency swith then start the truck via keypad again. If C 28 appears again check the microswitch under the red emergency switch button. You can bypassing it to be sure is it the microswitch or not. Thats a frequent problem on BT's.
Can you tell me what SRO is ? I changed the sensor for the arm and it’s still going off . Do I need this key ? Mine is unlocked . But only goes up to 24 . Thank you
hello I HAVE A CONCERN WITH MY ELECTRIC TRANSPALETTE HYSTER MODEL; P2.0 SERIES: A418T02855P IT MAKES MAINTENANCE REQ ON SCREEN AND FOLLOWING FLT 30106 AND IT HAS STOPPED TO OPERATE EVEN AFTER THE MAINTENANCE. WHAT TO DO (PLEASE)?
Where I can find the manual for this can key?
hi. my toyota 7hbw23 goes forward and backwards but the cylinder won't go up and down. can you help?
What does error code E225 mean?
Buenas como puedo arqueir can key y cual seria su precio
ON BT can you top up the speed without this dongle?
Any idea on how to do it??
U need the can key first
And put the pin do not push the green key, push the horn and select using steer forwardn3 times and horn again...in my place the speed about ...forward 75 and backward 70 and il change speed 100 and real damn fast and hard to control..
Can you help for code E250 please
How to reset service message c28 code error
can you provide information for a code 28
manuel bautista emergency switch activated.
How i can reset code 28
Code C 28 is not a error code on BT. Its an info that the emergency switch is pressed down. Shut the truck off via keypad,release the emergency swith then start the truck via keypad again.
If C 28 appears again check the microswitch under the red emergency switch button. You can bypassing it to be sure is it the microswitch or not. Thats a frequent problem on BT's.
@@andreaskrivak4088 Hello Andreas, could you provide information for a code 23 please ? Or if you know where to find a manual ! Many thanks
Can you tell me what SRO is ? I changed the sensor for the arm and it’s still going off . Do I need this key ? Mine is unlocked . But only goes up to 24 . Thank you
tengo problemas con el sistema hidráulico no saca código nadamás no activa el sistema
hello I HAVE A CONCERN WITH MY ELECTRIC TRANSPALETTE HYSTER
MODEL; P2.0
SERIES: A418T02855P
IT MAKES MAINTENANCE REQ ON SCREEN AND FOLLOWING FLT 30106 AND IT HAS STOPPED TO OPERATE
EVEN AFTER THE MAINTENANCE.
WHAT TO DO (PLEASE)?
Erer code 3. 101 model LWE200 YEAR 2010 / DRIVE SLOW NO HYDRORIC UP DOWN
Please help me reset errore 104
104 is a problem in the controller or there is a problem with the electronic brake.
@@FSTZentrum ок,then how can i solve this problem can k? Dismantled the brake,disconnected the chips,no results.
Toyota is garbage,don't touch is not same line as a cars ,I have 4 pcs all has problems