Thanks! The wire height for the internal secondary is only 2in long. So at 19in it is a bit more like 9.5 times. I insulated it with Epoxy and added the outer ABS tube to hold the primary so in the end it looks a bit bulkier.
@@rodriguezfranco3839, I posted about it here highvoltageforum.net/index.php?topic=2338.0 I will eventually post the exact schematic I used but so far it is not to far off of LoneOceans RSSTC design. It is a half bridge of IGBTs. I plan on making a Ramped DRSSTC full bridge to see the additional performance I can get out of it.
220 volt work?
Sheesh those arcs are like at least 6 times rhe coil lenght
Thanks! The wire height for the internal secondary is only 2in long. So at 19in it is a bit more like 9.5 times. I insulated it with Epoxy and added the outer ABS tube to hold the primary so in the end it looks a bit bulkier.
@@QZW_Labs crazy !! What kind of setup are you using for the driver ? Is it a half bridge ? What resonance Frequency?
@@rodriguezfranco3839, I posted about it here highvoltageforum.net/index.php?topic=2338.0 I will eventually post the exact schematic I used but so far it is not to far off of LoneOceans RSSTC design. It is a half bridge of IGBTs. I plan on making a Ramped DRSSTC full bridge to see the additional performance I can get out of it.
More details can be found here: highvoltageforum.net/index.php?topic=2338.0