I used recollections cardstock for an order I had and if I’m not mistaken... I found that the foil stuck more to one side of the paper than the other. Almost as if one side is smoother than the other and the foil stuck to the smoother side more. When I was printing, I didn’t realize this as I thought it didn’t matter which side I printed on. But as I started foiling, I noticed some came out better than others and after 40 invitations in, I realized it was the side i printed on. Lol. Just a thought! If you look at the cardstock, you might notice a difference in the surfaces. If not, maybe it was just my pack? Lol
Great tips, thanks. I foiled on vellum (a card verse) with some sample gold foil that I think came with my minc machine and it was perfect. I just used copy paper as a transfer sheet. Then I tried again with some different foil (don’t know the brand) and it was a hot mess. The foil went all over the vellum, not just on the toner. I did both lots on heat 3. I tried the no name foil a couple more time lowering the heat each time and got the best result on heat 1 but there was still some foil where there shouldn’t be. Anything else you can suggest with the more temperamental foil?
I realize this video is 5 years old but I think everyone of these tips are still valid. I stepped through them as you suggested and my problem was solved. I do however have 1 question not addressed. I use a silhouette to cut gift tags - which is a print and cut process. How can I cover the registration marks so that toner doesn't transfer onto the cardstock when moving the paper through the minc? I'm not using a transfer sheet but that problem still exist when using the transfer sheet.
Awesome! I'm using the same paper and using a laminator, which I've used before for foiling and worked fine but with different cardstock brand. I am getting a grainy finish, I was thinking it was the toner but I've printed a few times on the same design and not working. I'm wondering if it's my laminator although it's very very hot. I'll try the shaking the toner trick and hope it works.
Thanks for this! Very helpful. I'm wondering if you have any tips or advice on foil that's stuck outside of the printed area. I'm getting specks in those areas when they've got not print on them. Thanks
When you're foiling dust is your enemy. This might sound sllly but I dust the back of my foil and the foil sheet that I'm going to be using. I use a VERY soft brush. I have one just for foiling. I hope that helps.
SMASH THAT LIKE BUTTON PEOPLE!! THESE ARE AMAZING TIPS!! First of all, I forgot to tell you the other day, your HAIR!! It looks awesome!! (Of course, I kinda miss the beanie too!🤣) And the fact that you talk with your hands means you have personality!! 👐🏼 I think it’s a good thing!! Thanks for ALL of your info. Your 🧠 is so RAD! 🤯 I hope this video gets 10,000 👍🏼!!! ☮️
I have pre printed cards I bought from taylored expressions. I put foil over two so far, and ran them through the laminator. I used the embossing tool prior to clean my surface. both of my cards have foil all over the card including the image! Suggestions? Thank you so much!
I have two laser prnters. One is a color one and one is a black and white one. Both are HP brand.The black and white one has comprable printer cartridges (not the HP cartridges). Can I print a toner sheet twice to get a darker black image? Would that work?
Hi, how are you? Thanks for your tips i really appreciate it ☺️ i need to ask something.. i have a good HP printer and my foiling results are good if i use my minc machine.. but after a day i see little specs on my design like the foil is coming a little bit off.. should i try a higher heat setting on my minc? I had used heat setting 4 on my minc and i use a 65 lb smooth cardstock.. i don’t know what the problem is..😞
Hi. I have a problem I hope you can help If I cut the foil paper say 2 inches x 2 inches. It attaches to the project say, the words but it also leaves foil everywhere else. Once I remove the foil I can see the foil residue 2 inches x 2 inches in the paper. . I’m using a mink machine and mink foil. I’m doing it on tracing paper and a laser printer.
I'm having the same issue, the first print I ran through worked perfectly but every print after was a disaster, I'm thinking different heat setting might be needed for different foil brands
@@ceilidhsdesigns okay so i figured out the foil i was using was TERRIBLE. make sure you have quality foil or keep trying different foils. I ended up getting the MINC foil and it worked great!
These are great tips!! I’m going to try getting a new folder!! Thanks for the video... I’m hoping that helps. I’ve had my Minc for years and have yet to perfect foiling lol
Great tips! What if the foil sticks to entire background that doesnt have toner? My foil paper attached to entire image and my design. IT doesnt come out clean and crisp because it attached to entire media. I used Clear glossy sticker paper, and also tried the regular Clear with no gloss. Both same results, and lots of pecs and foil attaches to entire piece.
@@andipyatt2891 I figured it out hun. You have to make sure the paper your using is only for laser printers. I previously used Avery Clear Sticker paper for laser and injet printers. Don't use that at all. I ordered the clear sticker paper from Onlinelabels.com here's the link www.onlinelabels.com/products/ol177cl
@@Pita-SimplyLiving I'm having the same issue!! I'm using a Brother monochrome laser printer, clear glossy sticker paper(think it's technically a full sheet label) for laser printers from online labels, Scotch laminator set at 5 and deco foil. The foil is adhering to way more than the design, and it's driving me nuts!
@@lisabrady7605 Lower the heat setting to 3 or 4 and try again. Maybe it's too hot. If your using the online label sheets for laser printers you should be fine. I have the minc laminator from Heidi. But any laminator should work, just try lowering the heat setting. I also have a brother laser printer, those are great!
My printer is leaving residue or something over the whole project causin things to be foiled that shouldn’t be anyone’s know how to fix it it’s messy and keeps ruining everything on sticker paper
I was so frustrated yesterday! I have a monochrome HP laser jet printer but I don’t have authentic toner in it. I printed a black toner sheet to practice foiling .i even printed it twice so it would be really dark but it would not foil! I used Deco foil and Gina K foil! All failures! The authentic toner for my printer is $90!
i got a minc machine a couple weeks ago but was having alot of issues so i emailed heidi swapp with photos and they said the machine was faulty and i got a replacement but now the new one is transferring the foil onto everything including the blank parts of the prints and onto the transfer sheets I've tried every heat setting same results, do you have any idea why this is?
@@STYLESBYLIFEBEAUTYNMORE Toner foil is activated by laser toner, glue and stuff like that because it doesn't have its own glue. Hot foil has an adhesive on the back that is activated by heat. The Hot foil is used with machines like the glimmer or the couture creations foil machine. There are several videos explaining the difference and showing the different brands of foil. The best chanel is Nancy Stamps. She explains this so everyone can understand. That's where I found out the difference.
Hi. I have a problem I hope you can help If I cut the foil paper say 2 inches x 2 inches. It attaches to the project say, the words but it also leaves foil everywhere else. Once I remove the foil I can see the foil residue 2 inches x 2 inches in the paper. . I’m using a mink machine and mink foil. I’m doing it on tracing paper and a laser printer.
BEST Foil Troubleshooting video...
how to avoid the unwanted foil to stuck on other area than the area that you wanted after laminate it?
I used recollections cardstock for an order I had and if I’m not mistaken... I found that the foil stuck more to one side of the paper than the other. Almost as if one side is smoother than the other and the foil stuck to the smoother side more. When I was printing, I didn’t realize this as I thought it didn’t matter which side I printed on. But as I started foiling, I noticed some came out better than others and after 40 invitations in, I realized it was the side i printed on. Lol. Just a thought! If you look at the cardstock, you might notice a difference in the surfaces. If not, maybe it was just my pack? Lol
Great tips, thanks. I foiled on vellum (a card verse) with some sample gold foil that I think came with my minc machine and it was perfect. I just used copy paper as a transfer sheet. Then I tried again with some different foil (don’t know the brand) and it was a hot mess. The foil went all over the vellum, not just on the toner. I did both lots on heat 3. I tried the no name foil a couple more time lowering the heat each time and got the best result on heat 1 but there was still some foil where there shouldn’t be. Anything else you can suggest with the more temperamental foil?
I realize this video is 5 years old but I think everyone of these tips are still valid. I stepped through them as you suggested and my problem was solved. I do however have 1 question not addressed. I use a silhouette to cut gift tags - which is a print and cut process. How can I cover the registration marks so that toner doesn't transfer onto the cardstock when moving the paper through the minc? I'm not using a transfer sheet but that problem still exist when using the transfer sheet.
Thank you for all your useful information, it was clear and well delivered x
Awesome! I'm using the same paper and using a laminator, which I've used before for foiling and worked fine but with different cardstock brand. I am getting a grainy finish, I was thinking it was the toner but I've printed a few times on the same design and not working. I'm wondering if it's my laminator although it's very very hot. I'll try the shaking the toner trick and hope it works.
Thanks for this! Very helpful. I'm wondering if you have any tips or advice on foil that's stuck outside of the printed area. I'm getting specks in those areas when they've got not print on them.
Thanks
When you're foiling dust is your enemy. This might sound sllly but I dust the back of my foil and the foil sheet that I'm going to be using. I use a VERY soft brush. I have one just for foiling. I hope that helps.
Rubbing alcohol doesn't work as well to get toner off your transfer folder, but nail polish remover works better
My foil wont stick to the edges of my font! Any idea why??
SMASH THAT LIKE BUTTON PEOPLE!! THESE ARE AMAZING TIPS!! First of all, I forgot to tell you the other day, your HAIR!! It looks awesome!! (Of course, I kinda miss the beanie too!🤣) And the fact that you talk with your hands means you have personality!! 👐🏼 I think it’s a good thing!! Thanks for ALL of your info. Your 🧠 is so RAD! 🤯 I hope this video gets 10,000 👍🏼!!! ☮️
I have pre printed cards I bought from taylored expressions. I put foil over two so far, and ran them through the laminator. I used the embossing tool prior to clean my surface. both of my cards have foil all over the card including the image! Suggestions? Thank you so much!
I really think I'm going to start foiling soon!
I have two laser prnters. One is a color one and one is a black and white one. Both are HP brand.The black and white one has comprable printer cartridges (not the HP cartridges). Can I print a toner sheet twice to get a darker black image? Would that work?
You have supplied very good and helpful advice. Thank you very much
Great advice but just wondered do you dust your foil and designs as I’ve seen lots of people on you tube say it is a must
You can remove the toner spots or foil that is on your transfer folder by using nail polish remover - works great!!!!
Can you pass along the cdn bulk place because I need to buy in bulk. Please :)
omg one of these tips fixed the problem I was having thanks so much
Hi, how are you? Thanks for your tips i really appreciate it ☺️ i need to ask something.. i have a good HP printer and my foiling results are good if i use my minc machine.. but after a day i see little specs on my design like the foil is coming a little bit off.. should i try a higher heat setting on my minc? I had used heat setting 4 on my minc and i use a 65 lb smooth cardstock.. i don’t know what the problem is..😞
Hi. I have a problem I hope you can help If I cut the foil paper say 2 inches x 2 inches. It attaches to the project say, the words but it also leaves foil everywhere else. Once I remove the foil I can see the foil residue 2 inches x 2 inches in the paper. . I’m using a mink machine and mink foil. I’m doing it on tracing paper and a laser printer.
Hi just got my Heidi swapp foiling matchine it doesn't want to heat up
how do i avoid gettign foil everywhere else on the paper? besides the intended ink?
I'm having the same issue, the first print I ran through worked perfectly but every print after was a disaster, I'm thinking different heat setting might be needed for different foil brands
@@ceilidhsdesigns okay so i figured out the foil i was using was TERRIBLE. make sure you have quality foil or keep trying different foils. I ended up getting the MINC foil and it worked great!
@@Rythom_ Which Minc foil, because that's what I'm currently using and it's doing exactly the same thing as you previously stated.
@@richrosegold610 I ended up switching to the Heidi swapp minc and that helped tremendously!
These are great tips!! I’m going to try getting a new folder!! Thanks for the video... I’m hoping that helps. I’ve had my Minc for years and have yet to perfect foiling lol
Fantastic tips - so helpful!! Thank you so much for this! :)
You saved me!!! Thank you so much!! Greetings from Mexico
Great tips! What if the foil sticks to entire background that doesnt have toner? My foil paper attached to entire image and my design. IT doesnt come out clean and crisp because it attached to entire media. I used Clear glossy sticker paper, and also tried the regular Clear with no gloss. Both same results, and lots of pecs and foil attaches to entire piece.
I am having the same issue.
@@andipyatt2891 I figured it out hun. You have to make sure the paper your using is only for laser printers. I previously used Avery Clear Sticker paper for laser and injet printers. Don't use that at all. I ordered the clear sticker paper from Onlinelabels.com here's the link www.onlinelabels.com/products/ol177cl
@@Pita-SimplyLiving I'm having the same issue!! I'm using a Brother monochrome laser printer, clear glossy sticker paper(think it's technically a full sheet label) for laser printers from online labels, Scotch laminator set at 5 and deco foil. The foil is adhering to way more than the design, and it's driving me nuts!
@@lisabrady7605 Lower the heat setting to 3 or 4 and try again. Maybe it's too hot. If your using the online label sheets for laser printers you should be fine. I have the minc laminator from Heidi. But any laminator should work, just try lowering the heat setting. I also have a brother laser printer, those are great!
Could you please recommend a laser printer for foiling stickers and 300gsm card stock use??
Did you find a printer :)
5 Stars. Thank you. -Momo
thankyou sooo much for all the tips 🌺🌻
Thank you for checking out my video!! I hope the tips help!! 💜
Auntie Tay sticker paper is sold out do you have a backup sticker paper to recommend. Thank you
An you recommend a good wifi printer ? Something not to high on the 💵 🤭❤️
What printer are you using, please?
Great video girly
It get hot to touch but doesn't stop blinking red
Awesome tips! Would love to have the link to your Canadian supplier.
How do you know when you need new pouches? I have a minc machine
My printer is leaving residue or something over the whole project causin things to be foiled that shouldn’t be anyone’s know how to fix it it’s messy and keeps ruining everything on sticker paper
Thank you. Hugs and blessings.
Where do you get your foil at in Canada?
I was so frustrated yesterday! I have a monochrome HP laser jet printer but I don’t have authentic toner in it. I printed a black toner sheet to practice foiling .i even printed it twice so it would be really dark but it would not foil! I used Deco foil and Gina K foil! All failures! The authentic toner for my printer is $90!
There was no foil on it at all!??
@@TheFoiledPlan It was speckled.
i got a minc machine a couple weeks ago but was having alot of issues so i emailed heidi swapp with photos and they said the machine was faulty and i got a replacement but now the new one is transferring the foil onto everything including the blank parts of the prints and onto the transfer sheets I've tried every heat setting same results, do you have any idea why this is?
Are you sure that you are using the correct foil. Mine was dong that then I found out that I was using hot foil instead of toner foil
@@soniaguzman762 what’s the difference
@@STYLESBYLIFEBEAUTYNMORE Toner foil is activated by laser toner, glue and stuff like that because it doesn't have its own glue. Hot foil has an adhesive on the back that is activated by heat. The Hot foil is used with machines like the glimmer or the couture creations foil machine. There are several videos explaining the difference and showing the different brands of foil. The best chanel is Nancy Stamps. She explains this so everyone can understand. That's where I found out the difference.
@@STYLESBYLIFEBEAUTYNMORE one good video is What is the difference between hot foil vs. toner foil? by Nancy Stamps. She is so informative
Hey I’m super new to foiling and mine is just transferring all over the page
You might be using the wrong type of foil
@@nekonette I'm having the same issue, and have been using the same foil that I used for my successful foiled stickers. It's gotta be something else.
@@richrosegold610 did you change anything? Paper, paper thickness, print settings, etc?
How to foul on textured cardstock
Could you link your Canadian supplier please
Great video. You foiling video for beginners is unavailable 😔
I was 3 minutes into this before I realised this isn't a hair foiling video 😅 i think I'm on the wrong side of UA-cam
Hi. I have a problem I hope you can help If I cut the foil paper say 2 inches x 2 inches. It attaches to the project say, the words but it also leaves foil everywhere else. Once I remove the foil I can see the foil residue 2 inches x 2 inches in the paper. . I’m using a mink machine and mink foil. I’m doing it on tracing paper and a laser printer.