2020 Silverado RST with Bose amp, subwoofer, install (remove back seats)

I install an amp kit on my 2020 Silverado 1500 RST with Bose. I remove the back wall and give details most videos exclude on how to do it. I used Subthump's harness and 4 10" sub box. I didn't include a sound clip of it playing. I'll try to track down a clip so you guys can get an idea of what it sounded like, but it was VERY loud and clean.

[@philgamboa2906]

Thanks for the video. Do you have rear heated seats? At 7:50 in the video, I see a black connector with red tab and was curious if this is the connector for the rear heated seats. Retrofitting these seats to my truck and trying to find the factory connector location.

[@jasonoctane4787]

@@philgamboa2906 You’re welcome. I don’t have the truck any more or I’d look for ya. I don’t remember if it had heated seats but if I had to guess… don’t think it did.

[@philgamboa2906]

@@jasonoctane4787 - Appreciate the quick reply! I'll go do some digging.

[@philgamboa2906]

@@jasonoctane4787 - Just took my rear seat down and that connector is for the heated rear seats :). Super helpful!

[@jamiekilbury7346]

Looks good,thanks for info on how to temove the rear seat...howd you mount the amp tho did you just screw it to the back wall and did the screws go fully threw the back where you can see them if you look donw between the cab and the truck bed...also i used to have 2 12s of the harmony subs you have came witj the truck sun box...wasnt a big fan of them they didnt hit the low beat so you will eanna replace then soon lol

[@thedetailingman3816]

I was wondering how he mounted the amp. Hopefully did not just screw it into the back wall.

[@alexroy6309]

Hi, how did you wire up the sub thump harness to the loc and which loc did you use? 7:25

[@jasonoctane4787]

I used a LC2 and that harness was plug and play. Gives you the speaker wires to feed into the LOC. Sub thump harness made it about as easy as it gets

[@lancebrown8823]

Best video so far untill the actual hooking up the LC2and sub. I am more of a visual person, reading directions not so😅.

[@-emme-nguyen4404]

Yup he needs to video that part

[@PrizrakC6]

Twin Peaks for the win

[@jasonoctane4787]

Ahaha always

[@PrizrakC6]

@@jasonoctane4787 hope you enjoyed the beer. They have the best Guinness!

[@jasonoctane4787]

@@PrizrakC6 I appreciated it brutha 🤜🤛 never hesitate to come through and say what’s up

[@isaiah3007]

What harness did you use to run to the line out converter so you didnt have to use speaker wire??

[@jasonoctane4787]

Subthump.com had a harness and I tapped into the speaker wires off that harness off the amp on back wall.

[@martinezjamz7482]

What t harness is that for the Bose amp

[@SpookyMontero]

Nice

[@jesusreyes89]

Where did you get the harness for the line out put?

[@jasonoctane4787]

I think it was SubThump.com

[@raycerwatson1377]

How did u mount the amp to the cab did u screw straight to it or build an amp rack?

[@jasonoctane4787]

Screwed/mounted onto back wall but had to remove some foam for a perfect fit

[@alexroy6309]

Or did you only use the green and white 7:25

[@jamessmart7605]

Could 0/1 gauge for through that grommet

[@thedetailingman3816]

I had to drill a hole to run zero gage in my 2022 pre-update RST.

[@juledoren]

Damn that trucks dirty

[@manstuff612]

That's what trucks are for princess