Jag ser fram emot att få se dina videor då de ger mig så mycket inspiration och lärdom! Tack för att du delar med dig av dina kunskaper och att du vågar prova sådant andra säger inte går. Resultaten blev fantastiska! Den ljusblåa blev helt underbar!
Thank you so much for creating this video, very helpful step by step straight forward instructions. I have a bust I made and the glaze is awful! I’m wondering if I can sand her back and use underglaze to repaint her then cover with a glaze… or whether to cover her with an over glaze. I haven’t found any relevant video’s regarding repainting human sculptures. I’m pretty new at this, but totally hooked!
Thank you :-) I don't do any sculptrural work but I often re-glaze the pots I do. You can see how I do in this video: ua-cam.com/video/JMRcj4c3zF8/v-deo.html
Mikkel gracias por tu tiempo y por el compartir, es una inspiracion total. Como yo uso el traductor habia un elemento que traducia como"fregadero" y nunca supe que era. Un frasquito pequeño redondo que tenia como algo blanco. Que es? A que temperatura horneas? Gracias 🤩
Thanks for the great video Mikkel. Do you have any idea why the glaze was not sticking right in the first firing for the pot at 6:00 - i did have that problem with several pots and different glazes. thanks again!
I too have a glaze that was blue until suddenly it wasn't. Don't you hate it when a glaze looks great, looks great, and then one day it looks completely different?
The glaze in question (my Floating Blue variant) actually still look as it always have. It was just this one application that came out too white - and there are off course some chemical explanation to this that I am just not fully aware of. I do, however suspect the iron dust and the mix with A2 white is the main courses.
It could be many things. Maybe the SG of the glaze is not right for it (too much or little water to dry material ratio) or the glaze simply is not good for this application
@@deMibPottery i had done the fitst glaze firing with the same glaze but too little (sprayed) now i dipped the piece in the glaze and after drying it cracked 🤔 .’’’
I was wondering if you put a clear glaze over your pots? Is it possible to add oxides and stains when a pot has been fired with a clear glaze on it and then refire it?
No, it's just the colored glazes. Yes, you can usually refire. But unless you tried the exact combination before the results can be a little unpredictable :-)
Det er sådan nogle slibe-pads. Jeg har købt mine hos BSZ. Du kan finde dem her (de heder Schleifpads i deres katalog - som kun er på tysk) bsz-keramikbedarf.de/wp-content/uploads/BSZ_Werkzeuge-2019.pdf
Sir, you have the kindest energy. Your art is very beautiful. Thank you
Thank you. That is kind you to say ❤️🙏
I find when I heat up the pottery in the oven to 175-180 F. The glaze sticks right away and of coarse dries quickly. I have had good results .
I know some like that method. I like it better the way I di :-)
Jag ser fram emot att få se dina videor då de ger mig så mycket inspiration och lärdom! Tack för att du delar med dig av dina kunskaper och att du vågar prova sådant andra säger inte går. Resultaten blev fantastiska! Den ljusblåa blev helt underbar!
Thank you so much. That is very kind of you ❤️🙏
Beautiful Pots, awesome step by step process. Thank you. Nice hat. Have an awesome new year.
Thanks you so much ❤️🙏
Thank you so much for creating this video, very helpful step by step straight forward instructions. I have a bust I made and the glaze is awful! I’m wondering if I can sand her back and use underglaze to repaint her then cover with a glaze… or whether to cover her with an over glaze. I haven’t found any relevant video’s regarding repainting human sculptures. I’m pretty new at this, but totally hooked!
Thank you :-)
I don't do any sculptrural work but I often re-glaze the pots I do. You can see how I do in this video: ua-cam.com/video/JMRcj4c3zF8/v-deo.html
Tak Mikkel 🎉..rigtig godt du giver dig tid til at fortælle,
Tak :-)
What a great video, something we all need to know. I seem to have a lot of cracking when I refire. Do you have any suggestions?
Thanks. It could be glazes that do not work together. Not all do
Beautiful and really inspiring thank you for sharing your stunning work.
You are so welcome :-)
Rigtig, rigtig fin video om en svær disciplin. Du giver blod på tanden til mere omglasering!!!!!!
Tak. Ja, jeg synes også tidligere at det var svært. Men med denne metode går det faktisk ret let :-)
Mikkel gracias por tu tiempo y por el compartir, es una inspiracion total. Como yo uso el traductor habia un elemento que traducia como"fregadero" y nunca supe que era. Un frasquito pequeño redondo que tenia como algo blanco. Que es? A que temperatura horneas? Gracias 🤩
Thanks. It is zinc oxide
Thanks for all the videos. Happy New Year, Mikkel.
Thanks. Happy New Year to you too 🙏
Thank you! Merry Christmas!
Thanks - Merry Christmas to you too ❤️
I have watched lots of vidios of reglazing your vidio is by far the best same teqhnique but very well explained thank you i have lots to reglaze
Thanks a lot :-) Glad it helped
Very helpful. Many thanks for sharing.
Glad it helped 👍
Thank you for sharing your talents
My pleasure 😊
Thanks for the great video Mikkel. Do you have any idea why the glaze was not sticking right in the first firing for the pot at 6:00 - i did have that problem with several pots and different glazes. thanks again!
Thanks! There can be many reasons such as bad glaze application or a problem withe fire of that pot
Meget lærerigt - tak for det 🤗👍
Tak ❤️🙏
Hi, maravilloso todo Gracias ! Me gustó mucho la que sale en el minuto 58.35 🤩👌Bye 🖐
Thank you ❤️🙏
I actually like them, they have a organic look
Thanks :-)
I too have a glaze that was blue until suddenly it wasn't. Don't you hate it when a glaze looks great, looks great, and then one day it looks completely different?
The glaze in question (my Floating Blue variant) actually still look as it always have. It was just this one application that came out too white - and there are off course some chemical explanation to this that I am just not fully aware of. I do, however suspect the iron dust and the mix with A2 white is the main courses.
I like the brown theme. Spray with Ash
I don't like it on the blue :-)
👍🎄thank you merry Christmas
Thank you ❤️
Beautiful bowls
Thank you!
What can i do of the frist layer of the glaze cracks when reglazing, what did i do wrong ? Thank you Chantal
It could be many things. Maybe the SG of the glaze is not right for it (too much or little water to dry material ratio) or the glaze simply is not good for this application
@@deMibPottery i had done the fitst glaze firing with the same glaze but too little (sprayed) now i dipped the piece in the glaze and after drying it cracked 🤔 .’’’
Thank you for any advice
How about heating the pot before you dip it and also you could add gum to the glaze to make it stronger good luck Mary
I tried many methods. This is so much easier :-)
does this technique work on pots that have pinholes as well?
I never tried but you should. Maybe it can safe a good pot for you 👍
Merry Christmas !
Thanks ❤️
They look great darker. I always prefer darker colours
:-)
I was wondering if you put a clear glaze over your pots? Is it possible to add oxides and stains when a pot has been fired with a clear glaze on it and then refire it?
No, it's just the colored glazes.
Yes, you can usually refire. But unless you tried the exact combination before the results can be a little unpredictable :-)
I have some older dinner plates that the glaze has worn off. Is it possible to reglaze them??
It depends on material but maybe
Mikkel - hvad er det for noget sandpapir du bruger? Skal det være fint, medium eller? Synes du siger det er fra the Potter Store!?
Det er sådan nogle slibe-pads. Jeg har købt mine hos BSZ. Du kan finde dem her (de heder Schleifpads i deres katalog - som kun er på tysk)
bsz-keramikbedarf.de/wp-content/uploads/BSZ_Werkzeuge-2019.pdf
@@deMibPottery mange tak 🙏🏻
Mix steel wool into the clay
It's a different effect., I like it more on the glaze :-)
💝
😲💯👍👋🙋♀🍀🍀
😁🙏
Thanks for sharing, just video too long, you don’t have to dust or clean every pot so you can to shorter the video 😊
Thanks. There is an index in the description, so you can jump to what you want to see - or skip sections :-)