boss question, napansin ko na hindi nakagitna nung una bago mo kinabit yung cotter pin tapos naputol yung video at napunta sa gitna, ano ginawa mo ? inadjust mo ba pasikip para pumantay or paluwag?
ung pg check ng chain slack dpat nkanside lng.. ksi ung bigat ng bike may batak sa kadena... kpag nka angat iba maging reading m... pero pwede rin nmn, basta yung result e nsa specs ung chain slack
So confused. It looks like u ended on the fifth line on the swingarm. Ended same spot from the view. And I'm so confused as to how tightening the bolt... which seems like it would pull the axle to the front would tighten the chain and not loosen it by bringing the sprocket forward
@@chokiego4750 depende sa gamit... normal n maintenance lng nmn, langis, adjust kadena, gulong... air filter at spark plug matagal ang intervals lalo n valve clearance nsa 24k kms pa bago inspect
I came to see how to do it. I am a visual learner. Stayed to the end for the ride. Thank you!
tibai nang mga turnilyo nang kawa boss'sa clarity nang vid mo boss'parang stainless po'AAAWWWW'kala ko serious na po'😁😁😁😁😁
Kaya idol ko to eh, hehe, dun lang tayo sa practical ✌️😁
buhai mga 2t jan boss'naririnig ko palagi'rxt user po'2t'👍👍👍
Siraniko mode 🤣✌
jajaja'aaawww'yun lang'ayus!👍👍👍👍👍👍👍👍👍👍
Idol san mo nbili ung panukat mo ng chain ty
Hndi na ba luluwagan ung sa may brake caliper katulad sa mga underbone
Ayos 👌regularly ka na nag upload 👍
Paps dapat ba pag cchain adjustment eh naka sidestand or paddock stand ang motor?
boss question, napansin ko na hindi nakagitna nung una bago mo kinabit yung cotter pin tapos naputol yung video at napunta sa gitna, ano ginawa mo ? inadjust mo ba pasikip para pumantay or paluwag?
Yes sir, hinigpitan ko pa pra ma align
lamang ang may kaalaman... yan yung mga dapt pinapanood...
Ilng torque po?
ang ingai pala kpag po kung naka pipe yang z4 boss'maramai na dito sa amin'pero ganda nang tunog'mapapa lingon ka'
00:31 ano name ng lock ng bolt bro?
Cotter pin
sir munski, ano po ginagamit mo pang chain maintainance?? (pang chain cleaning and chain lube)
Degreaser, minsan chain cleaner, pg alang ala sabon tubig brush hehe...then gear oil png lube, minsan chain lube din n de spray...
@@MunsKi noted sir,, drive safe sir,, im a fan from las pinas metro manila sir,, lalo na ng z400 mo,, Godbless 😊😊😊
Paps pede malaman san mo nabili mga tools mo at ano brand?
1st Munsters
munski bka naman pwede tau mag meet
taga orion lng ako hehehehe bukas sana kung free ka
Pwede pg n libre
Nice po. Pero napansin ko lang mas madali ata kung naka center stand na pag inaayus kadena? Or mas ok ung gawa nyo po na naka side stan
ung pg check ng chain slack dpat nkanside lng.. ksi ung bigat ng bike may batak sa kadena... kpag nka angat iba maging reading m... pero pwede rin nmn, basta yung result e nsa specs ung chain slack
@@MunsKi thanks sir
Kung kaya naman, sarili na lang 🤭
Sayang din yung bayad, pwede pa pang gas 😜🤣
Munsters
So confused. It looks like u ended on the fifth line on the swingarm. Ended same spot from the view. And I'm so confused as to how tightening the bolt... which seems like it would pull the axle to the front would tighten the chain and not loosen it by bringing the sprocket forward
Boss san mo nabili z400 mo.san dealer at city? Salamat.
Sanfernando pampanga wheeltek
@@MunsKi bos matanung ko lang magastos ba sa maintenance ang z400.
@@chokiego4750 depende sa gamit... normal n maintenance lng nmn, langis, adjust kadena, gulong... air filter at spark plug matagal ang intervals lalo n valve clearance nsa 24k kms pa bago inspect
@@MunsKi ah ok salamat bos.taga dinalupihan bataan ka lang bos ak taga zambales lang.pinagpipilian ko kasi yn bos z400 at ung mt 03.
limp bizkit'