Baja Designs S1 Off-Road Lights Install on Flat-Out Crash Bar 2024 Harley Davidson Road Glide
Вставка
- Опубліковано 10 тра 2024
- In today's video we go over installing and reviewing the Baja Designs S1 pod lights on the new 2024 Harley-Davidson flat-out crash bar! Diving in to how to remove the gas tank, hide wiring on these new 2024's, mount fog lights, etc!
As always, thanks for coming along for the ride!
OWG
Links:
www.amazon.com/dp/B09ZVZYP1D?... - Авто та транспорт
Brighter, Bolder, and Better 🏁 Products are also backed by a lifetime warranty. Very clean install on the road glide looks amazing!
Kickass product, appreciate the comment & kind words!!🙌🍻
I like the way you do things, Very professional and clean. Probably better than 90% of any of the shops that would have done it.
Bro’s install came out cleaner than his haircut 😅
Best comment so far 🤣
🤣
what's funny is the second the video started I thought to myself props to my man for being so focused on what he's doing that he cuts his own hair. 50 seconds later...🤦♂....🤣😂🤣 Keep rocking brotha
Good job man! I like that you cat appeared to do some quality control 🐱
Nice job.
You are a talented and confident young man.
👍👍👍👍
Be careful, ride safe.
Looks great !!! You did it correctly and not half ass by just zip tying the harness along the crash bar . Haircut ??? Going for the Morgan wallen party in the back look ??? Just kidding lol
Great video, I'd bring my bike to you for customizations. Your so precise and planned. Great job. looks get. Ride safe.
The luxury of knowing how to do things yourself
Nice work mate. Looks sweet. Had to laugh when you commented on feeling nervous with the wiring when you accessed under the tank. That stuff makes me jittery to begin with every time. 😂
Greetings from Australia btw and keep up the good work. Your content is on point.
You make it all look so easy.
Can I just get mine delivered to your place, you knock out some mods and ship it out? 🤣🤣
I know this is all old content but I’m diggin this channel. 🤘🏼🤙🏼
I appreciate that, that’s such a compliment, never know where life will go, maybe one day I do something like that!😅 for now, I appreciate you watching and being a part of making this stuff awesome!🤜🤛
your ocd did not go un-noticed. subbed my dude .. keep up the awesome content!!
I’m glad I found your channel! Pretty clean install!
Ok cool. Where’s the part where you come to Dallas and help install one on mine? That’s a slick setup.
Great and cleanest job I’ve ever seen. ⚡️
Awesome job, professional. I would do the same route. Thank for the vid 🙏🙏🙏
Thanks for the kind words and for watching!!🙌
Wow! Great job, great install, looks nice. Very impressed and surprised with the amount of light they produce at night. Keep up the good work.
Thanks for the kind words, glad you enjoyed!
Looks great. I have the Flat outs on my 24 StreetGlide, and was wanting to add some fog lights. I just might do it your way. Thx for the post.
Glad I could help brotha!🙌
Yay, Jesse…another video… what a treat 🤗
Thanks for tuning in!🫶
Super Clean Install!!!
Good Job 👍🏻👌
Very clean install!👊🏾👍🏾
Thanks brotha!🤝⚡️
that came out GREAT!!!!!!!! 🤘⚡🤘
There is a pre wired fog light plug up under the front part of the engine… wired my morimoto banger fogs up that way into the plug. Seamless and then you simply activate fogs in your set up in the infotainment and it gives you a button on the screen for fogs.
I’m aware, thank you for letting others in this comment section know. You can get the harness from Harley or Tim’s Stereo. I don’t like having to navigate through multiple screen steps to turn them on or off and then you have to go to HD to get a flash done so you can run them with high beams. I can turn these on or off in a second no matter what lighting mode im in. Granted it is a lot more work.
@@OffWeekGarage I hear you on the brights. Going to have to get the dealer to flash it.
I could see if you’re in live in the country how you would possibly want both. For me I found that them switching off when you turn on the high beams to be a huge benefit. When you flash your high beams rapidly to get cagers attention it not only flashes the high beams buy alternate up and down. It graphs their attention so quickly. It’s like have police lights up front.
@@timdwilloughby lol yep it’s probably wild looking
Do the new Harleys use a Canbus system?
Nice looking install. Very clean.
Nice man. Thanks for the video.
Great job. Looks awesome. Nice thought out process
You do some clean ass work. Love your videos
Nice clean install!...nice work! Thanks for sharing...stay safe out there!!😎🤙👍🤙👍🇨🇦
Great job🚀
Thank you sir!!🙌
Hot and a cold? Are you running water lines? Good job running the wires. Looks clean
Could you not use the led fog lamp wire harness from Hd? I want the same lamps but wired to factory harness. Great job on the placement of those lights 👍🏼
Very well installed, clean and thought out. Not mine thing as far as looks but well done.
Trigger the relay with a plug that gets power when ignition is turned on. Eliminates the need for the ugly switch
Looks great! My only concern is does your toes kick the back of the light? Looks close to shifter. I wear those damn square toed ariats. Still sweet looking set up!
Funny you ask, if WAS a little close, keep an eye out for my next video in the next couple days. That is addressed and no longer an issue!
Awesome install!! How long did it actually take you?
Did you use the set up menu on the bike before messing around with the electric system? Wondering if you had any faults after the installation?
How do you like the wind splitter wing shield? I have the Klock Werks flare but actually really like the look of the Harley one? What size do you have and what’s your height is you don’t mind me asking?
🔥
Look good!! Where you from dude ? Lets ride!!!
This looks awesome! in fact, i just created my "installation manual" written up based on your really good step by step explanation and I'll be copying your work 1:1 with the BajaDesign S2 Pro's :-). One question I hope you can help me with: how do I remove the radiator shroud??
It's not shown in the video.. and when i check the installation guide for the flat out bar it mentions turn fork left and pull shroud straight off.. is it that simple? (I thought to ask as i really don't want to break anything on a new bike..) Thanks and enjoy the miles on your great motorbike!
Haven’t rode in years and today I test drove a 2024 road glide and after my hands were numb. Does anyone know why that happened ? I never had that happened when I used to ride years ago
That’s a nice set-up you have. I installed a pair of Morimoto 2 bangers on my flat out bars. I connected directly to the existing unused HD harness behind the radiator.
Good looking high and tight job. "Carry on" "Good to go" Im guessing Prior military but what branch Army or Marine Corp. SF
No prior military service, but I’ve been an MMC holding maritime engineer since 18 yrs old, so most of my career Ive sailed under ex navy submariners and surface dwellers. I’m plenty messed up like the rest of them.🤣
I bet Harley would charge a hefty price for labor on that job
Why you didn’t plug it to the bike fog light plug?
I didn’t want to have to get it programmed to be able to use it with the high beams and I didn’t want to have to rely on the infotainment working my way thru the settings to turn them on. I can turn them on and off with a flick of a switch this way, personally preference. And later on if I want to change it up, I’ll already have the switch installed for onboard lighting like rock lights.
That looked like a whole lot of work, I do like the clean install - hate zip tied wires that show, but would have been nicer if the lights came on with ignition and off when shut down.
Why not wire to the dedicated fog light harness? Would have prevented all the tank removal and all the extra fluff. The fog light harness is under by the horn with a dummy plug.
Good question, couple reasons. I love doing things the hard way, I wanted to have quick and easy control of the lights on and off without having to rely on going thru menus on the infotainment screen, I didn’t want to have to go to Harley to get them flashed to work with my high beams. And IF I ever want to go with that route, I have a dedicated harness and switch preinstalled now for my future intended accent lighting. Kills multiple birds with one stone for my particular scenario and allows me to bring more diverse content for you guys, I appreciate the questions and you taking the time to watch!🙌
@@OffWeekGarage makes sense, hopefully more cpu/flashing access is possible in the future with these bikes to allow for those mods. the empty 12 pin harness plug is a power source as well, throws out 2 full time power and one accessory on power only. Soundz sells the harness plug.
biggest shock of the video was that you paid for that haircut. 🤣😂🤣🤝
That is honestly screwed up..
That they don’t have a laugh reaction option on instagram!!🤣🤣🙌🤝⚡️
Should’ve just depended the plug and then repent it because now if you ever have to service the crash bar or service the Lights you’re dealing with soldering wires
Im sorry this is where i say HELL NO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! lol
Why, this isn't anything too complex.