DIY Salad Spinner (Washing Machine)
Вставка
- Опубліковано 2 жов 2024
- A step-by-step guide to build a salad spinner from a washing machine. I show you all of the steps needed to do this conversion. These are very common in the wash/pack station of market gardens.
Whirpool WTW5000DW
UVM Instructions - blog.uvm.edu/c...
Parts from Lowe's:
Timer - www.lowes.com/...
Electrical Box - www.lowes.com/...
1/2" Compression Connector - www.lowes.com/...
1/2" Knockout Clamp - www.lowes.com/...
1/2" EMT Conduit - www.lowes.com/...
1/2" Conduit Clamps - www.lowes.com/...
Wire Connectors - www.lowes.com/...
Wash Pack Station Video - • Wash Pack Station - Ma...
Josh's Instagram @josh.sattin - / josh.sattin
SUPPORT THE CHANNEL:
If you wish to support the channel monetarily, you can use PayPal here:
paypal.me/josh...
This is appreciated, but unnecessary, and no content will ever be behind a paywall.
Gasp! Is that Mrs. Sattin @ 9:29 ?
Great video thanks!
Yeah. She's made a feel appearances in the background. Glad you liked the video.
Why not just run the spin cycle? I'm missing something major I assume
I see you, Gene! 🤘
Thanks no till
For anyone building this washer - The addition of a simple rotary dimmer allows you to control the speed of the spin!
Looks good. The pump could be kept and utilized to push the water wherever you would like it to drain as well, just splice it in with the drive motor
Thanks. I actually did think about this. That might work, but the way washing machines operate they spin for a while and then pump for a little bit at the end when there is water in the basin. I am not sure the pump would be happy running dry most of the time. A lot of pumps will burn out if run dry.
Just picked up a washer to convert yesterday...
Hey Josh, please please use that cable armor / harness to control those wires. Not only you are able to 'cable manage' it better, if you use it in combo with high IP rating junction cable box, you'll be much safer with possible splash water or direct water. Those boxes most likely cost the same as the waterproof wire connectors. A box + managed wires will leave very little, if any, room for water to get into or onto exposed wires. Stay safe! Happy farming. Regards from Europe.
Thanks for the concern. I agree that would be a more proper way to do it, but I really do think it will be fine.
@@JoshSattinFarming Just replied here as you have most of the things there. The armor is already there only the cable box has to be bought. I don't wish it to any one to get shocked while working with water.
@@janbroekhuizen5 I understood what you meant from your first post.
Thank you for doing what I was looking for! I want to acquire a washing machine to do the same conversion. I will keep my eyes open for a similar model and give this a try! Again, thanks for sharing!
You're welcome. Good luck with your build and thanks for watching!
corrugated split loom tubing would make a quick/dirty cover for that exposed metal edge. Great video, by the way!
Do you recommend this contraption 3 years later? Are you still using it? How is it holding up? I'm curious to hear about your experience, would you do anything differently?
Great Video Josh! I love my Washing Machine Spinner👍
Just wondering why the switch/timer is on the neutral instead of the hot? Also, what do you do with a VFD 3-phase motor like so many of the newer washers? (They have multiple speeds, and reverse)
Serendipitously, I think this might be just the type of washer people are likely to sell second hand. I did a bunch of research for my last washer (after enduring one that didn't clean the clothes for my situation) and that type with little/no agitator was a type that many didn't like. I would add one of the recent versions of a Speed Queen to your possibilities list (ie, the one with the very short agitator). Folks might be able to get one that is very clean and new-ish. I love a good reuse.
Yes, I bought this one used for $200. UVM also recommends certain Speed Queens too:
blog.uvm.edu/cwcallah/2018/07/20/greens-spinners-for-farm-use/
@@JoshSattinFarming This answers my question about how much it cost. :0 So all in, you have maybe $250 or so with the appliance switch...etc. Not bad and that washer looked very clean. Good video.
Hello Josh, I was able to build a spinnet recently. I also added bumbers to the top rim of the drum like you it was a nice snug fit. But, I noticed at high RPMs the basket would pop up a little which caused it to get out of balance and no function... Did you have this issue?
Just picked up the same washing machine today and going to do this. “Not responsible if you destroy your washing machine or electrocute yourself” 🤣. Love your videos!! Your just a cool dude! Keep up the great work!!
Sucks we don’t have top loaders in the U.K. 😩 great video josh!
Thanks Jack! Yeah, that is a bummer. I forget sometimes that things like appliances are different over there.
I don't believe you don't have any. less common maybe , but they will be out there
Instead of buying a timer you could have used the one from the control panel. It would take some other modifications but would work nonetheless.
Great ending.
I wonder how we can integrate the bubbler WITH the spinner 🤔
Let me know when you figure it out!
Challenge accepted 🤠
but how do you wire the timer the tork wiring is confusing, no where to connect the neutral wire with only 3 connection points; line 1, load 1, & load 2, how do you take the old power cable and connect it to the timer and then the timer to the washing machine?
Where is the blue basket from? What is it called? Cannot find them in Australia.
Fabulous information, one of your best info vlogs Josh. For the top edges I'd use some car window frame rubber as it will hold on and it should cost next to nothing. Thanks again Josh.. and Gene.
so, i guess our next project will be putting up a clothes line!!! HAAAA
Lol as an appliance tech you made me cringe as you cut in to that VMW washer. But it is neat to see that they can be used differently then what I normally see. By the way most Maytag, Amana and Whirlpool that are belt driven should work for this project.
Haha. I bet!
Very nice….where can a basket like yours to buy?❤
Looks like it is going to work really well. Good job.
Recently subscribed and have watched many videos. Very educational and much appreciated. Hope my first season goes well. 2021!
Glad you are enjoying the videos. Thanks for subscribing and good luck this season!
Tell that dog to pay attention
Yasss just in time!! Amazing as always
For me, I just love the noise it makes 11:23 when it spins
It a direct drive
Josh I don't see any info on where you got the inner basket. Can you give details on that please? THANKS
THANK YOU for this!!
You're welcome!
Meghan Markle!!!😂😮
Thanks you you gave me a good idea on making a chicken plucker, be safe and blessed
WOW, cool innovation !
Aren't there laundry spin dryers in the US? I'm not an electrician, but maybe those would be better at spin drying greens.
I am planning to build one of these. I was wondering if making a custom basket out of stainless steel mesh would work? Seems like you could make it fit better and have more drainage? What do you think?
This is excellent. On a different subject what is the best orientation for beds, polytunnel and green house?
How would the ring affect the basket if you replaced it, to keep the tub in balance.
Pool Noodles would be excellent tubes to zip tie over the edgy parts. Colorful too!
Picking up my free Maytag washer Monday! can’t wait to do the conversion!
Nice job! - Just a thought - those handles on the basket spinning around look a little scary - could just be me - I might put a 1/2" screen door over that so no kid gets his hand caught.
I have seen people put a plexiglass lid on it that they flip down when it's running. Not a bad idea.
Love it
11:23
Hey Josh. I did a similar convert recently. I took that white plastic rim off the spinner though, so it's right back to stainless steel. A lot of those plastic rims hold water.
Sounded like it was going to take off. Like a old B UFO movie
Half inch pex tubing works great to secure the basket. Had some extra laying around. Cut a length to encircle the inner drum. Sat it right on the ridge like in your video. Some tek screws to keep it in place. The basket now sits flush and secure!
Thanks, great video
Nice one Josh. Good job!
Respect from Africa 🇿🇦
Wondering if a portable apartment style washing machine would work..?
Honestly, it would probably be nice because you could do a soak then transfer it for a spin. And unless you get a really good deal on a washing machine, probably cheaper too. And the bonus of less effort to make it work the way you want it to.
Love your disclaimers
Thanks!
👍
Fantastic video!! Have you ever done a similar video for a germination chamber from a refrigerator or cooler?
I have not done that yet. If I do, I will be sure to make a video.
do you have a link for the buckets with hole not been able to fine them, link on your old wash station video was not good no longer,could not find them on agri supply , thanks in advance for any help
The one I have is the one that I bought from Agri Supply in store several years ago. I searched for "fish basket" on Amazon.
amzn.to/39DZcfg
@@JoshSattinFarming thank you
Nice job. Will you please show another video of it in use? Thanks.
Here is a video with my old one, but it'll work the same way.
ua-cam.com/video/6y3mE9ydrQs/v-deo.html
@@JoshSattinFarming - Thanks!!
Super
what size is your basket?
It is the standard sized fish basket you can get in a lot of places. It is 18-19" wide at the top. I would just make sure whatever washing machine and basket you buy are compatible.
Show us the damn lid! 😆
Watch the video. I did show it towards the end.
I've watched it twice more, and I still don't see Gene's handiwork enlarging the lid opening so that you can put/pull the basket in/out yet cover up all those edges and open spaces m. What am I missing?
UA-cam is so zany. I love it😃