Hello everyone, just so you know, I have made an updated version here, that doesn’t make you fall: ua-cam.com/video/lnZXclnbN9I/v-deo.htmlsi=EmMkL3CmITYxSxmF
So I built this for a sun house I built IN THE SKY (I'm 37 blocks up in the air) and let me tell you this elevator WORKS WONDERS instead of having to do the bubble elevator. I was having issues falling through the floor going UP but I learnt that the top 2 iron blocks push you through the bottom blocks (which obviously keeps you from going up. I should've realized sooner xD) BUT without the 2 top blocks you go up and down perfectly. No glitching/fazing through the bottom iron blocks. :) Hope this helps other's struggling with falling through! I also recommend fully enclosing it with terracotta as it doesn't stick to the slime like he stated in the vid c: Just be careful enclosing it around the buttons with the redstone as it'll trigger the piston to go either up or down! Build 1 out from the button mechanism c:
@@dunnoausernamedunno5533 Yeah expose slime looks horrible. That's why I enclosed mine with Terracotta! I used the black and red terracotta block and it looks okay.
Edit: Idk why but it got stuck again like half an hour later., exact same problem where the piston that pushes up the chamber dosent stick to the honey block seemingly randomly. Nothing is blocking it and nothing is touching it nor the honey block. Edit 2: It was the wall I had around it I decided to build this for my realm (Switch Bedrock) and it only took me about 20 minutes. I used honey instead of slime though, and I made the button call it back as well. My first issue was that I kept falling through the floor. Someone in the comments mentioned that you can fix this easily by taking out the ceiling blocks from the chamber and I don't mind the look personally. Honey looks better with more blocks than slime so it isnt a huge deal to me. Afterwards I thought it would be cool if I could call the elevator down to make it more practical. I played around with some vertical redstone ideas but decided that a redstone torch tower works the best. I built a normal torch tower and a decending tower off to the side of the flying machine, but the starting mechanism was causing a new problem. For whatever reason the mechanism can cause one of the pistons to detatch from the honey block, specifically the one that pushes up the chamber. I had to observe it for 2 hours on the realm because up to this point I had been doing test builds in copies of the realm. I looked back at the comments reading how someone changed the mechanism to start the elevator from the observer to a block of redstone. I didnt understand at first but I found out the observer in the back corner should be activated instead of the one next to it, so I put a stick piston w/ stone to trigger it from underneath and it worked for a while.
your instructions are clear and easy to follow, your attitude + vibe are good, and I haven’t felt overwhelmed or anything like that. you just gained a subscriber
Put a Minecart on the floor, bedrock added a bug right when I uplaoded this video so before it gets fixed just sit in a Minecart when going up. Down still works fine :)
I think I found a fix to the issue people are having with it stopping. I changed the mechanism to start the elevator from the observer to a block of redstone. So the piston pushes the block of redstone into the starter piston and immediately retracts it (using an observer to activate it). Hasn't broke on me yet
If your playing on switch you glitch through the floor, but you can fix that by easily removing the top iron blocks on the elevator it self( I don't know how it is on other consoles, but that fixed it) For all the ones saying it doesn't work, rebuild the thing, it worked for me to
we need another update video on this please bc i built two of these and yes the elevator works but the problem is when you add the button for it to go up. it gets stuck once you make it go up.
I’m having the same problem with falling through the floor, I put a mine cart down like you said but it threw my whole system out of whack, it just wouldn’t go up anymore. What do you think may be the problem. I placed the rail down to put the cart on, pushed the button, got into the mine cart then just nothing and some parts of mechanical system went up but the flooring where I put the cart on didn’t.
Works great for my builds, but I play with Short Sneaking/Crawling (Experimental features) so change the roof and floor of the elevator to slabs if you don’t want to glitch out of the elevator.
Hey, so as people in the comments have discovered, you don't clip through the floor if you break the two iron blocks directly above you when you walk into the elevator. This works, but exposed slime blocks look ugly. Is there a way to make this design "taller" so you have more head room? That would likely fix it as it seems the cause is the top blocks not moving fast enough and "pushing" you through the floor if that makes sense
@@Quin_The_Winion Thanks to the new update, crouching now physically changes your height in bedrock. I wonder if these height changes are part of the reason you clip through the floor?
Dude I love you I’ve been looking everywhere for one that isn’t too long and actually works, you just earned yourself another sub, keep up the great work.
For everyone wondering why they can't get the observers to face the right direction, it's based on the compass directions. If you seem to be off by 90 degrees, rotate your entire structure by 90 degrees and start again - and all is good! Btw, this is Bedrock.
If wall blocks are touching the slime but diagonally (corner to corner so not face to face) will it interfere with the build? I have made it and it worked until I did so but wondering if it was just faulty or it was the blocks.
Works great when looking at it going up and down, but as soon as I go inside, the elevator disassembles as soon as I press the button to go up (I must be too heavy xD )
it wont work properly for some reason. i built it exactly the same as u but it only raises a few blocks before the top half disconnects and it stops. pls help me on fixing this issue
Can you make part two on how to call the elevator like for example you are on floor 1 but the elevator is on floor 2 and when you press the button the elevator comes down and you can go in it I tried to do it but it wouldn’t work
@@TomcoTwo I have the same problem going up i have no problem but when i click the button to go down it just doest word it goes one block down en then brakes
Fixed the falling through the floor thing. It’s simple just replace the floor and ceiling blocks with slabs the floor on the lower half and the ceiling on the top half.
@@sloth_whale9226 you probably did it wrong. I have this on my current survival world. I even wired closing doors to it that open when it detects the elevator arriving and departing.
it doesn’t work for me. with i use it in survival i fall through the elevator and then it splits in two and breaks completely ive done this almost 6 times now and i don’t know what i did wrong
I need help with the observers, everytime i place the second one (where arrow faces upwards), the base faces the wrong way. I’ve tried it elsewhere and sometimes it works but when i try it in the place i need it, it doesn’t
Not yet, it’s a glitch mojang just isn’t doing anything about for now, there’s a work around where you sit in a Minecart but other than that nothing I can do yet sorry
I built this, and for some reason could only get the button to work a few times before the elevator would suddenly leave parts of itself behind. I just used a different method for the button now, it works but it takes up more room. This is sort of my first automated project 😅
I hate the fact I gotta get a minecart to go up I’m very sad but it works tho great video my man one of the best elevators tutorial till this date and I’ve build plenty thanks a lot you earn an subscriber
For some reason the button mechanism for the top floor won’t send the flying machine back down I’ve rewatched this part a couple times and can’t see what I’ve done wrong, can someone help me?
it worked for a short moment but I gotta rebuild it again I'm getting lazy rebuilding it. Tips for people who don't want to be the same as me don't carry a efficiency 5 pickaxe while using the elevator
this is the only elavator for me that works but i found that if the elavator is moving and them when you try breaking the back part it well turn into like update_info2 block or block 36 and it breaks the entire elavator but if you dont do that them it well work great
I don't understand what's wrong. I'm doing everything step by step I thought. it just doesn't move anywhere. (Realms Bedrock) Edit: I've recreated this 3 times step for step and nothing happens.
I fall through the floor as soon as i test it. Then the elevator stops and seems to split in half. Ive made this 3 different times and it works perfect until i get in it.
You know the C shape that is the "elevator" itself? break the iron blocks directly above you when you go into the elevator. This works, but the exposed slime blocks look very ugly imo. Haven't figured out how to make it work while still covering the machinery.
We tried this out but the observer will not position correctly no matter which way I’m positioned. The triangle symbol isn’t facing the correct way for me.
Hello everyone, just so you know, I have made an updated version here, that doesn’t make you fall:
ua-cam.com/video/lnZXclnbN9I/v-deo.htmlsi=EmMkL3CmITYxSxmF
@@TomcoTwo thanks!
Instructions unclear, I am now facing multiple lawsuits due to people no clipping and falling to their deaths.
Use a minecart on the floor
So I built this for a sun house I built IN THE SKY (I'm 37 blocks up in the air) and let me tell you this elevator WORKS WONDERS instead of having to do the bubble elevator. I was having issues falling through the floor going UP but I learnt that the top 2 iron blocks push you through the bottom blocks (which obviously keeps you from going up. I should've realized sooner xD) BUT without the 2 top blocks you go up and down perfectly. No glitching/fazing through the bottom iron blocks. :) Hope this helps other's struggling with falling through! I also recommend fully enclosing it with terracotta as it doesn't stick to the slime like he stated in the vid c: Just be careful enclosing it around the buttons with the redstone as it'll trigger the piston to go either up or down! Build 1 out from the button mechanism c:
This fixed it, but I wish I knew there was a way to make it look better. Exposed slime blocks look ugly.
THANK YOU, i needed help with the fazing
@@dunnoausernamedunno5533 Yeah expose slime looks horrible. That's why I enclosed mine with Terracotta! I used the black and red terracotta block and it looks okay.
@@pandoeMaxx Glad I could help!! :)
If you want a roof and a floor replace the blocks with slabs at the top and below
I was able to get mine to work, thanks. I ended up getting doors and call back to work, so I'm pretty happy with how it turned out
Edit: Idk why but it got stuck again like half an hour later., exact same problem where the piston that pushes up the chamber dosent stick to the honey block seemingly randomly. Nothing is blocking it and nothing is touching it nor the honey block.
Edit 2: It was the wall I had around it
I decided to build this for my realm (Switch Bedrock) and it only took me about 20 minutes. I used honey instead of slime though, and I made the button call it back as well.
My first issue was that I kept falling through the floor. Someone in the comments mentioned that you can fix this easily by taking out the ceiling blocks from the chamber and I don't mind the look personally. Honey looks better with more blocks than slime so it isnt a huge deal to me.
Afterwards I thought it would be cool if I could call the elevator down to make it more practical. I played around with some vertical redstone ideas but decided that a redstone torch tower works the best. I built a normal torch tower and a decending tower off to the side of the flying machine, but the starting mechanism was causing a new problem.
For whatever reason the mechanism can cause one of the pistons to detatch from the honey block, specifically the one that pushes up the chamber. I had to observe it for 2 hours on the realm because up to this point I had been doing test builds in copies of the realm. I looked back at the comments reading how someone changed the mechanism to start the elevator from the observer to a block of redstone. I didnt understand at first but I found out the observer in the back corner should be activated instead of the one next to it, so I put a stick piston w/ stone to trigger it from underneath and it worked for a while.
This is the only elevator I've found that actually works, thank you
your instructions are clear and easy to follow, your attitude + vibe are good, and I haven’t felt overwhelmed or anything like that. you just gained a subscriber
When i go up it makes me fall trough the floor
Put a Minecart on the floor, bedrock added a bug right when I uplaoded this video so before it gets fixed just sit in a Minecart when going up. Down still works fine :)
@@TomcoTwo I had the same problem bc I was building it in a mall I’m making and this helped
@@TomcoTwo also instead of the bottom two blocks of the elevator you can put daylight sensors and the Minecarts don’t roll away
@@The_KingCrabPiratescan confirm both of these tips worked for me
@@The_KingCrabPirates I tried this,but the cart keeps falling through the floor
I was speechless when I saw it worked. I spent DAYS trying videos and they didn't work. But yours did, so thank you so much!
You met the bedrock edition redstone expert
I think I found a fix to the issue people are having with it stopping. I changed the mechanism to start the elevator from the observer to a block of redstone. So the piston pushes the block of redstone into the starter piston and immediately retracts it (using an observer to activate it). Hasn't broke on me yet
Could you do this for me ?😢I have everything else done
If your playing on switch you glitch through the floor, but you can fix that by easily removing the top iron blocks on the elevator it self( I don't know how it is on other consoles, but that fixed it)
For all the ones saying it doesn't work, rebuild the thing, it worked for me to
You can replace these with"upside down" trapdoors. I think iron or dark oak looks the best. This is high quality stuff ur making. 👍
Thank you I also play on Switch and I was doing an Underground-Lab and
I kept glitching through the floor😑
Thank you for the Advise😃
how'd you hide the ugly green slime?
thx bro i got the same problem now it fixed 😄
Built this for my Doofenshmirtz Evil Inc. tower home. Works like a charm.
Thank you!!! It actually works! Now I can make my underground base a proper elevator instead of water elevators
Glad you like it :)
@@TomcoTwo i keep on glitching through the floor of my elevator how to i fix it
maybe put block on the bottom in the impty space of the elevater@@pinkyplayz6441
@@pinkyplayz6441use the floor for daylight sensors or put a minecart in it
we need another update video on this please bc i built two of these and yes the elevator works but the problem is when you add the button for it to go up. it gets stuck once you make it go up.
You have to use a non-sticky block like obsidian behind the button. I made the same mistake.
I did that and it still didn't work 😭@@ArsenicShooter
@@Duckboggg im sorry to hear that, I didn’t play since half a year 😅
@@ArsenicShooter it does matter, I found another one 😂
@@Duckboggg I suppose you meant it doesn’t matter 😂. Cool ! 👍
I’m having the same problem with falling through the floor, I put a mine cart down like you said but it threw my whole system out of whack, it just wouldn’t go up anymore. What do you think may be the problem. I placed the rail down to put the cart on, pushed the button, got into the mine cart then just nothing and some parts of mechanical system went up but the flooring where I put the cart on didn’t.
You need to destroy the rail after you place the Minecart 👍
Thanks! With tour video i can build my first elevator in Minecraft! You are a very good redsrone duilder!❤
This is the only working elevator that works for me thanks.
Works great for my builds, but I play with Short Sneaking/Crawling (Experimental features) so change the roof and floor of the elevator to slabs if you don’t want to glitch out of the elevator.
I also have experimental features on, and I never thought of that.
it did not work for me too ty for info
Thank you. This comment helped me soo much. My elevator is finally completed.
It didn’t work, can you explain? Bottom half, or top?
Whenever i get in the elevator when it goes up i fall through, down works fine¿
Same here, did you managed to fix it?
Hey, so as people in the comments have discovered, you don't clip through the floor if you break the two iron blocks directly above you when you walk into the elevator. This works, but exposed slime blocks look ugly. Is there a way to make this design "taller" so you have more head room? That would likely fix it as it seems the cause is the top blocks not moving fast enough and "pushing" you through the floor if that makes sense
@@Quin_The_Winion Thanks to the new update, crouching now physically changes your height in bedrock. I wonder if these height changes are part of the reason you clip through the floor?
Dude I love you I’ve been looking everywhere for one that isn’t too long and actually works, you just earned yourself another sub, keep up the great work.
For everyone wondering why they can't get the observers to face the right direction, it's based on the compass directions. If you seem to be off by 90 degrees, rotate your entire structure by 90 degrees and start again - and all is good! Btw, this is Bedrock.
Finnaly I found a working and realistic elevator build, thank you so much
If wall blocks are touching the slime but diagonally (corner to corner so not face to face) will it interfere with the build? I have made it and it worked until I did so but wondering if it was just faulty or it was the blocks.
Works great when looking at it going up and down, but as soon as I go inside, the elevator disassembles as soon as I press the button to go up (I must be too heavy xD )
it wont work properly for some reason. i built it exactly the same as u but it only raises a few blocks before the top half disconnects and it stops. pls help me on fixing this issue
Wow You are the person who helped me make a very perfect elevator I thank you for this knowledge....!!!! Thank You 🎉🎉🎉
Can you make part two on how to call the elevator like for example you are on floor 1 but the elevator is on floor 2 and when you press the button the elevator comes down and you can go in it
I tried to do it but it wouldn’t work
I don't know why, but I got stuck between the elevator and the pistons.
But i changed the block above and below Me to slabs
and it works
Sometimes when I tested it the elevator for some reson leave behind a piston that is connected to the slime block and brakes.
Hmm, are you on bedrock?
@@TomcoTwo I have the same problem going up i have no problem but when i click the button to go down it just doest word it goes one block down en then brakes
i tried this and it works! keep up the good work! You've earned a new subscriber!
Thanks!
TYSM!!!! This helped me so much
Glad it helped!
This is easy to scale if I want to build a 5x5 right
Wdym
Fixed the falling through the floor thing. It’s simple just replace the floor and ceiling blocks with slabs the floor on the lower half and the ceiling on the top half.
Cap didn’t work
@@sloth_whale9226 you probably did it wrong. I have this on my current survival world. I even wired closing doors to it that open when it detects the elevator arriving and departing.
thank you so much for this tutorial
You're very welcome!
New favorite Minecraft UA-camr
it doesn’t work for me. with i use it in survival i fall through the elevator and then it splits in two and breaks completely ive done this almost 6 times now and i don’t know what i did wrong
In the middle part of the shaft, would replacing where you put stained glass with fences be okay?
Thank you very much it work in bedrock😊
Any ideas on why mine keeps on going up a few blocks then back down and up again until it reaches the bottom?
Sounds like it’s not built right, are all of the observers facing the right way?
Definitely making this!
It becomes ugly when you decorate it into a house cause you can see the dark redstone after the elevator goes up or down
I need help with the observers, everytime i place the second one (where arrow faces upwards), the base faces the wrong way. I’ve tried it elsewhere and sometimes it works but when i try it in the place i need it, it doesn’t
x2, that happens to me too
@@eduardoramirezbello9456 Turns out it’s okay! Keep building it and it will still work
@@anonymousperson7677 I tried it in another world and it already works lol
@@anonymousperson7677 I'm trying in my world and it doesn't work but in others it does. Do you know any way to make it work in my world?
@@anonymousperson7677 the observer only looks to the side
my iron golem spawned on the lightning rod
and is this farm stackable? if i build it like 80 blocks above and just let the iron drop down
this is an elevator tutorial bro
😭
one problem, when i go up, i phase through the blocks.
The OP says it's a glitch in the game & to sit in a minecart in the elevator. Not sure if it works but maybe try that.
Get rid of the top two iron blocks or whatever you used for the elevator that holds you
New sub earned
Youre the best 5 stars ⭐⭐⭐⭐⭐
I fall out the bottom blocks on the way up, but it works fine on the way down. Any fix for this?
Not yet, it’s a glitch mojang just isn’t doing anything about for now, there’s a work around where you sit in a Minecart but other than that nothing I can do yet sorry
@@TomcoTwo Well the minecart fix is pretty solid. I'll try it out and reply here to let you know if it's working for me. Thanks! Do boats also work?
Can you slow down a little bit when you do your next tutorial because I would go back 10 seconds and be four steps ago
Thanks it really works to me
Hi, i have built this in my previous world and it was great, but is it possible to replace the slime blocks for honey blocks?
Yes that’d work fine 👍
@@TomcoTwoThanks!
Thank you so much
You made my grandson cry, because he couldn't get his house compled in time, with your instructions.
What. You’re grandson crying has nothing to do with me
Grandson needs to get good
Tell him don't put blocks for the roof and he won't fall through going upwards
I built this, and for some reason could only get the button to work a few times before the elevator would suddenly leave parts of itself behind. I just used a different method for the button now, it works but it takes up more room. This is sort of my first automated project 😅
It would be nice if you can do a tutorial on how to make the door or even a new one because this one is pretty buggy! Huge Fan ❤
This one’s probably the next step up from this, ua-cam.com/video/lVmhJheNk-Q/v-deo.html , it has a door and is better but is slightly more complicated
Whats the biggest u could make this
For some reason, mine doesn’t work. I’ve retried all the steps and checked everything.
U in java, or did you place non-stiking blocks
I just want to say can you make the elevator 4/4 in size on the bottom
I hate the fact I gotta get a minecart to go up I’m very sad but it works tho great video my man one of the best elevators tutorial till this date and I’ve build plenty thanks a lot you earn an subscriber
You are so underated keep up the good work
For some reason the button mechanism for the top floor won’t send the flying machine back down I’ve rewatched this part a couple times and can’t see what I’ve done wrong, can someone help me?
It's actually work😄👍
10/10 Would Reccomend
You got a sub!
:)
it only goes up one block then stops and if i activate it again only one normal piston moves
Best tutorial ever!!! Only thing is i noclip through the floor whenever i go up but could fix this with a boat, i dont get what the haters are saying
does this not work on java? every time i test it, the top and bottom half get disconnected after it moves 1 block
It doesnt sorry, sorry for the late reply aswell
hey do i have to make another one for each floor?
The important thing I saw was that you have to do this a couple of times before it started working normally
this video is really good. keep up the good work. :D
Thanks :)
Woah dude you got replied by the UA-camr🤯😳😳
@@TomcoTwo btw its easy but its hard for me😭😭 i keep messing up
Will it go to bottom if youre at bottom and press the button
No, but you could link up a redstone line to the top button from the bottom and then that would work
It works perfectly! Even when i go through the floor and die!
Put 2 minecarts
sorry i already broke it
good advice tho thanx @@joserodrigo161 :D
Can any help me when it goes up i go through the bottom blocks
it works and all but i fall through the blocks when the elevator is going up, do you know how i can fix it, please help me
Where do you put the shaft?
Hey I’m having trouble with this it keeps pushing me through the bottom blocks when I go up but not when I go down how do I fix this
same
I followed all the instructions.
Thanks!
No problem!
it worked for a short moment but I gotta rebuild it again I'm getting lazy rebuilding it. Tips for people who don't want to be the same as me don't carry a efficiency 5 pickaxe while using the elevator
Are you accidentally mining it lmao
It worked good... until i tried to go up with it sadly it didnt work going up but down works perfect solition?
If you fall through the floor that’s a glitch, I can’t do Anyhting about it really, but I have recently made an updated version which stops that
Will this work on 2+ floors? If not could you maybe make another one explaining that? Thanks!
This won’t, but there is a simialr one which will ua-cam.com/video/AjMpoF6XSM8/v-deo.html
Uhh mine had the top half and bottom half disconnected 😢
Tried this in the depths of Redstone Hell (Bedrock Edition). Works there too.
This doesn’t work for me it litteraly pushes half of the machine upwards and downwards that’s it although I am on 1.20.0 I think
your elevator does nothing, the piston beneath the slime block of the elevator shaft isn’t activating nor are the pistons on the slime stack.
wrong your not paying attention
@@LexemkingThegreat dude this is three months old, I already realized this doesn’t work on consoles.
@@JamJuice101it does
@@Dave_Davey Really? Has Mojang finally made it possible to make an elevator operational on the PS4?
@JamJuice101 it’s been possible for ages, I’m just the guy who made a design for one of
To fix it just replace the blocks at the roof and floor with slabs it should work because it works for me but the slime blocks can be seen
this is the only elavator for me that works but i found that if the elavator is moving and them when you try breaking the back part it well turn into like update_info2 block or block 36 and it breaks the entire elavator but if you dont do that them it well work great
What blocks can’t stick to it I want to cover it and don’t wanna mess it up
Tysm!!!!
I don't understand what's wrong. I'm doing everything step by step I thought.
it just doesn't move anywhere. (Realms Bedrock)
Edit: I've recreated this 3 times step for step and nothing happens.
I’m having the same problem
Bros accent is actually fire
Lol ty
HA I love this is the best way to show off to your friends!
I keep noclipping out of the elevator when its going up. Any way to fix this?
Put minecarts and use they Will the elevator Is moving
You are so so so underrated😊
anyone know if it is possible to add more floors with this design? 🙏
Not this design, but I do have a few multi floor elevator designs
Is there a way to recall the elevator if I'm on the second floor and it's on the first?
Just set up a redstone line from the button up to that floor
it worked but why do i fall through the floor when i get into the elevator while it goes up but it works perfectly fine when i go down
I fall through the floor as soon as i test it. Then the elevator stops and seems to split in half. Ive made this 3 different times and it works perfect until i get in it.
You know the C shape that is the "elevator" itself? break the iron blocks directly above you when you go into the elevator. This works, but the exposed slime blocks look very ugly imo. Haven't figured out how to make it work while still covering the machinery.
We tried this out but the observer will not position correctly no matter which way I’m positioned. The triangle symbol isn’t facing the correct way for me.
Same!
This really helped a lot thanks...exactly the design I was looking for....thanks bro. keep up the good work
Majestic and beautiful