Perfect fit for my Echo CS-370, and the chain cuts very well ua-cam.com/users/postUgkxBd8qUztQUCL8Rm1-aIig5ViBT2E_kO_6 . I had been using a Stihl chain that I had sharpened several times (sometimes at a shop, sometimes with my own electric chain sharpener), and there's no comparison -- the new chain cuts much better and holds its edge longer. We'll see how the new chain holds up when it needs sharpening, but for now I'm happy.
Just had to replace the clutch in our echo chainsaw. Tried the hammer and chisel and it would not budge, brought out the big guns and hooked up my air chisel and came off like butter. Thanks for the how to video it worked perfectly!
Man i gave you a thumbs up. I have an echo copy, a really nice copy, only one in the USA. I binded in a log. Asked my wife to remove it as i lifted the log wigh an excavator. She wiggled it really hard right and left insted of up and down, tweeked the sprocket and clutch cover, but didnt seem to permanently bend the bar.....as far as i can tell. So now i gotta get some spare parts. You can see this saw on my other channel "metal and wood" with chainsaw in the search.
As a YouTubist myself I know how hard it is to film successfully while working. A GoPro is the answer but they're not cheap, you did well, thumbs up from me.
By the way, a Woman has stolen your video and used it to promote herself :- ua-cam.com/video/--4sLovwmb8/v-deo.html I commented how she stole this from you but quickly deleted my comment and link to Your channel. I will do a video of me fixing my saw but will include a link and commendations to you in my video.
tallfarmboy, my story is that of a 30-something city boy enjoying the country life, learning the ropes a bit late but enjoying it nonetheless, i never could sit still. just wanted to let you know this trick worked just now with some paracord on my now obsolete makita dcs530i. gonna have a look at my oil pump now, love you in a not homer type a way. just really happy. liked and subscribed. take care!
I like the use of rope to make a 'piston stop'. Used to use the threaded metal stop but kept having to remove the top end/drill out, tap, and Helicoil the spark plug threads.....now I understand WHY!! Thanks tallfarmboy.
Very helpful. I need to replace the clutch drum on my Echo CS346, and now I feel more confident about doing it myself. Probably saved me a good chunk of change.
Great tip, I am in need of replacing my needle bearing. This just saved me 15.00 by not needing the clutch socket removal tool. Thanks for sharing this.
Just followed your instructions. Couldn't get the old part off until I used a vice grip and just turned it with my hand. Rest of your instructions are spot on! Thank you!
Great job man, in been trying to figure this out since i got my new rim sprocket. Great explanation as to why you don't like the plug stop, makes complete sense, the rope still has give for the hammer strike.👍👍👍 keep it up.
Definitely the correct method. I use(d) a plastic stop, and when it snapped in 1/2, the time to get the piece out of the engine was maddening....but I got it. Use rope, and a chisel...and a big hammer.
@@tmo4330 the saw works perfectly. I had to remove the clutch to replace the bar plate after I picked up something that ripped a hole in it. No issues since then, and this really made the clutch removal a piece of cake.
I see a tool made for the clutch removal, a perfect idea for the piston hold like the old days when changing valve seals fill the hole then slightly turn to tighten the string. See you on more posts
The rope is a cool trick, I use a sharpie sometimes. Cool vid thanks. Was thinking it was righty loosey from looking at it, but it's been a long time, thanks.
Hey don't forget to grease those clutch bearings while you have them out!!! And if there is a grease hole in the end of the crank shaft (it comes out under the bearings, when installed) then tell your subs about that. Thanks.
@@fongmaho You might try heating it a little with a butane torch. Sometimes this will cause metal to expand just enough to break stuck threads. Be sure to empty the fuel tank before you try this.
I use a cut, small diameter V belt I just shove in there until it stops. It's more firm than nylon rope. Older saws had an actual nut shape on the clutch which made it easy for a socket. Why they went away from that makes no sense.
Thanks for the video and very clear instructions. My chainsaw has a hex nut in the center of the clutch, I'll try to turn that and if that won't work then I'll go for the chisel way.
That chansaw was always there, you just chiseled off the excess parts to expose the art... Good advice, l've been looking at that and concluded the same thing, piston stop will cause damage to the threads, if not crack the block and totally ruin it. I'm not gonna say what the robot you give it to, can do with it, but it comes with handy threads.
Well done! I feel the same Re the hard piston-jammers....but am still split as to what is best...I think plastic stops that thread into the plug-hole are best, I don't own one yet and used rope thinking "It is best, not only is it soft & not going to hurt anything, but it 'spreads the load' of force the piston sees, since the rope fills the whole bore", but upon further thought I realize that there's NO WAY that rope is 'even', you're gonna be putting lateral pressures onto that piston/rod/bearings/crank etc, no question. At least the plastic ones (even the metal ones) are going-into the middle of the jug, so you know that the pressure on the piston is *centered*! Thanks for posting, so helpful watching others do something right-before you do it ;D
I hope mine comes off the same as yours because it has different style springs (one large spring the entire circumference) and the brake comes off when you remove the side cover. Edit: I figured it out, I can use the pin spanner that came with my angle grinder. Now I need to find some cotton rope as I don't want to put the poly one that I have in it.
Straight and to the point.
No long Spielberg intro with annoying music.
Awesome 😅😊...
Doing winter maintenance on my CS 490.
So timely...!
Perfect fit for my Echo CS-370, and the chain cuts very well ua-cam.com/users/postUgkxBd8qUztQUCL8Rm1-aIig5ViBT2E_kO_6 . I had been using a Stihl chain that I had sharpened several times (sometimes at a shop, sometimes with my own electric chain sharpener), and there's no comparison -- the new chain cuts much better and holds its edge longer. We'll see how the new chain holds up when it needs sharpening, but for now I'm happy.
Just had to replace the clutch in our echo chainsaw. Tried the hammer and chisel and it would not budge, brought out the big guns and hooked up my air chisel and came off like butter. Thanks for the how to video it worked perfectly!
I just came in sat down pull up on UA-cam how to get clutch off of echo cs-400 . Very first video was you . Thanks brother just what I needed!
Nice, now get back to work... LOL! Thanks for the comment!
@@tallfarmboy LOL LOL
During a cutting session I had a chain get stuck and wedged in behind the clutch. This video helped me get me chain removed - thank you!
Man i gave you a thumbs up. I have an echo copy, a really nice copy, only one in the USA. I binded in a log. Asked my wife to remove it as i lifted the log wigh an excavator. She wiggled it really hard right and left insted of up and down, tweeked the sprocket and clutch cover, but didnt seem to permanently bend the bar.....as far as i can tell. So now i gotta get some spare parts. You can see this saw on my other channel "metal and wood" with chainsaw in the search.
As a YouTubist myself I know how hard it is to film successfully while working. A GoPro is the answer but they're not cheap, you did well, thumbs up from me.
By the way, a Woman has stolen your video and used it to promote herself :- ua-cam.com/video/--4sLovwmb8/v-deo.html
I commented how she stole this from you but quickly deleted my comment and link to Your channel. I will do a video of me fixing my saw but will include a link and commendations to you in my video.
It is not often you come across a good video that is to the point. Thanks 👍
tallfarmboy, my story is that of a 30-something city boy enjoying the country life, learning the ropes a bit late but enjoying it nonetheless, i never could sit still. just wanted to let you know this trick worked just now with some paracord on my now obsolete makita dcs530i. gonna have a look at my oil pump now, love you in a not homer type a way. just really happy. liked and subscribed. take care!
Don’t say this enough. But thank you for this content. Helps immensely. God bless you.
thumbs up, worked like a charm. i used a piece of 3/8 round instead of a chisel because i didn't want to notch my clutch.
I like the use of rope to make a 'piston stop'. Used to use the threaded metal stop but kept having to remove the top end/drill out, tap, and Helicoil the spark plug threads.....now I understand WHY!! Thanks tallfarmboy.
I wish more videos were like this. Thanks for a straight forward, no non sense video. 👏👍👍
Procedure works effective just remove a husqvarna 450 rancher cluctch drum using the same technique 🫡..easy as 1.2.3.. Thanks for the insight
Thank you I was wondering how the clutch came off. This video shows how easy it really is
Thanks for sharing your video, I was trying to take it off the wrong way. Tomorrow I'm going to try your way. Thanks again Carl
Thanks for the video, worked spot on 👍, and thanks for getting to the content and not a lot of BS to sit through.
Thank you for this video. It was killing me that I couldn't hold the saw still for you!
I appreciate your consideration... LOL! I just need a third hand sometimes.
Thanks so much for this video. I am a first time chainsaw owner and this really helped.
Very helpful. I need to replace the clutch drum on my Echo CS346, and now I feel more confident about doing it myself. Probably saved me a good chunk of change.
T.D. Williamson Yep, you can do it!
ua-cam.com/video/ZUX5KjQ38H4/v-deo.html
Great tip, I am in need of replacing my needle bearing. This just saved me 15.00 by not needing the clutch socket removal tool. Thanks for sharing this.
Glad it helped
I did this and it worked. Replaced oil pump. Great video
Fantastic video, removed the old knackered clutch and put in a new one in just ten minutes.... chainsaw like new - Thanks
finally someone that can simply teach in a way you understand
Just followed your instructions. Couldn't get the old part off until I used a vice grip and just turned it with my hand. Rest of your instructions are spot on! Thank you!
THANKS MUCH I have been looking at this damned clutch for an hour!!!
Glad that I could help.
Thanks for that I need to replace the chain guide and had no idea how to do it.
worked like a charm...thanks for saving me 15 bucks
Great job man, in been trying to figure this out since i got my new rim sprocket. Great explanation as to why you don't like the plug stop, makes complete sense, the rope still has give for the hammer strike.👍👍👍 keep it up.
Success! My confidence just went up 17 horsepower!
Thank you i just replaced mine in under 5 minutes with this video saved me a couple hundred bucks
Thanks for the reminder. I have seen this trick before but forgot. 👍🏻
Good quick Video that saved me 25.00 in tools. I had my Echo CS-3000 sprocket off in ten minutes. Thank you.
Tnx.... For showing this video every step Works....
Great video!!!
Simple easy clear instructions the way it should be!!!👍👍
That's the way I'll do the job. Excellent video. an oldy but a goody. Thank you
Definitely the correct method. I use(d) a plastic stop, and when it snapped in 1/2, the time to get the piece out of the engine was maddening....but I got it. Use rope, and a chisel...and a big hammer.
Thirteenth time’s the charm! (I totally counted). Also I liked the added text.
OCD?
@@fongmaho did you hit it thirteen times,
though?
Thankyou worked great with the rope but I used a shifter to hold onto clutch and a screw driver inserted into the shifter handle for leveraged.
So easy. I did this on my Husqvarna 445 and got the clutch off with just a couple light taps with a screwdriver and a rubber mallet.
Thanks for encouragement. I will try as well. How is your saw doing?
@@tmo4330 the saw works perfectly. I had to remove the clutch to replace the bar plate after I picked up something that ripped a hole in it. No issues since then, and this really made the clutch removal a piece of cake.
@@BenParman Ran into a problem today, I don't have the small round piece that goes inside the sprocket. Cost me 19 dollars to order.
That worked like a charm, thank you so so much.
You sir are a legend, thanks for this, now to replace the gear for the oil pump 😁
Thank you.This is what YT was made for.
If you don’t want to beat on it with a hammer an angle grinder wrench works pretty well in place of a specialty tool.
Can't disagree... but, the span of the grinder wrench might not always match up to spots in the clutch. Hammer and chisel hasn't ever let me down.
I see a tool made for the clutch removal, a perfect idea for the piston hold like the old days when changing valve seals fill the hole then slightly turn to tighten the string. See you on more posts
just saved me from throwing this thing in the trash,
. thanks
The rope is a cool trick, I use a sharpie sometimes. Cool vid thanks. Was thinking it was righty loosey from looking at it, but it's been a long time, thanks.
Very good my friend and great to do video, thank you very much john.................
You are the man. Thank you!!!
thanks for the tips.very helpful.
Just the video I needed thank you!
👍straight to the point and simple. Great vid.
Excellent advice! Many thanks Sir.
Thanks for your help and advice
Thanks mate. Very helpful video. I done it.👌
Thank you great video easy to follow thank you
Very informative video. Sweet short and to the point. I appreciate that. *subscribed*
Well done, thank you for teaching me!
Thank you very much! Made this easy for me!
Thanks for this service video.
Thank you! This has been very helpful.
Thanks for sharing man! Great work!
Thank you for your vide you save my life
Hey don't forget to grease those clutch bearings while you have them out!!!
And if there is a grease hole in the end of the crank shaft (it comes out under the bearings, when installed) then tell your subs about that.
Thanks.
Yep, I've seen that in the manual.
Worked like a charm !
Worked like a charm, thank you.
Thank you for making the video
Hey, worked great,very easy. Thanks a lot.
Another thing that helps is to put a little Liquid Wrench on the threads. I couldn't get the clutch to move until I did this.
@@fongmaho You might try heating it a little with a butane torch. Sometimes this will cause metal to expand just enough to break stuck threads. Be sure to empty the fuel tank before you try this.
Thanks buddy! That was helpful!
Fantastic and clear, love the advise😔😏
Good video, thank you.
Great help thanks!!!
Spot on, great advice. This work perfect for me.
I use a cut, small diameter V belt I just shove in there until it stops. It's more firm than nylon rope. Older saws had an actual nut shape on the clutch which made it easy for a socket. Why they went away from that makes no sense.
Maybe its to make it harder to repair... Fucking scumbags
Thanks for the video and very clear instructions. My chainsaw has a hex nut in the center of the clutch, I'll try to turn that and if that won't work then I'll go for the chisel way.
The hex nut will work great, just remember that you need to turn it clockwise to loosen (reverse threads)
cheers , very useful
Thanks bunch for that good info!
thanks very good info
Thanks y'all farmer saved me $100.00
Great instructions. This worked perfectly! Thank you 🙌🏽
That chansaw was always there, you just chiseled off the excess parts to expose the art...
Good advice, l've been looking at that and concluded the same thing, piston stop will cause damage to the threads, if not crack the block and totally ruin it.
I'm not gonna say what the robot you give it to, can do with it, but it comes with handy threads.
Thanks man, got me out of a thight spot there👍
Well done! I feel the same Re the hard piston-jammers....but am still split as to what is best...I think plastic stops that thread into the plug-hole are best, I don't own one yet and used rope thinking "It is best, not only is it soft & not going to hurt anything, but it 'spreads the load' of force the piston sees, since the rope fills the whole bore", but upon further thought I realize that there's NO WAY that rope is 'even', you're gonna be putting lateral pressures onto that piston/rod/bearings/crank etc, no question. At least the plastic ones (even the metal ones) are going-into the middle of the jug, so you know that the pressure on the piston is *centered*!
Thanks for posting, so helpful watching others do something right-before you do it ;D
Very helpful, thank you very much friend!
I hope mine comes off the same as yours because it has different style springs (one large spring the entire circumference) and the brake comes off when you remove the side cover.
Edit: I figured it out, I can use the pin spanner that came with my angle grinder. Now I need to find some cotton rope as I don't want to put the poly one that I have in it.
Great to see the rope trick on hear been doin that for years
.,,.right on , thanks,,.wish i knew this in high school,.
Thank's for this trick ! It's working nicely :)
A really helpful video thank you!
Appreciate the video, thanks.
Saved me, thanks.
Thank you so much great video
Good video
Good video, brother. 👍 Thanks
The cord on the sparkplug hole is a new one. We used to stick a screwdriver in the opposite side to wedge it. Maybe not such a good idea.
Thanks
Even nylon piston stops will bust a hole through the piston. Ask me how I know
Thank you,, very much
Good information
great vid! thx!