Lowrider can be any vehicle, it is more of a mentality than the vehicle itself. I use to lowride back in the day, those rear skirts you were trying on are called sidewalk skirts. Can't wait till you finish the build.
Ok... I personally believe the body you need for this rig is a 70s- early 80s squarebody Suburban. Patina body with the old school white steelies. Absolute show stopper.
Hi mate, have the same body LC105. A friend of mine made it long time ago. Takes 2 years to get it done. Unfortunaly the mold is gone. Didn't done a lot of them. Mine is close to finish on a run-80 chassis. Best wishes Jens
“Florida Man” because, you may not be aware, but you’d almost certainly see someone in that state driving a 100 series with it slammed down tot the street top WITH those wire wheels on it. Basically, you’ve nailed the look already, Matt.
I've been having trouble with my transmission on my 59 but there is a fix for it my gears kept wearing out whenever I would drive at full speed with the factory electronics turned all the way up. Keep in mind this was a stock setup I just increased the settings to the max. The gears seemed to self destruct. The fox that I've found was to add little washers on opposing gears(meaning one per gear) . My transmission seems much quieter now and able to drive at full speed without self destructing.
I really dig the low riders Redcat put out. I just don’t know if I would run more than a couple batteries through it before I got bored and it just sat on the shelf looking cool. If I was more of a modeling guy, I think it would be a great project to customize and really make it look awesome.
Lowrider Land Cruiser is gonna be fantastic, can't wait to see it done. One thing I'd do is see about putting some huge wheels and low profile tires on it, really sell the look.
Heck Yeah Matthew Glad to see you enjoying the Fifty Nine Lowrider (mine in Blue too) I think @redcatracing and @jeveries done a Great job scaling these model's in detail 💯 That's a really neat way to extend the chassis to make it fit the rover body can't wait to see what you're creative mind and engineering skills do with this project 🎉🎊🎉 Lastly, if'n You're not gonna do anything with the extra chrome part's then I'm interested in them for my 59 Lowrider in Blue to "BLING" it out LOL 😁 ✌🤠👍 HFLPRCing =Having Fun Laughing Playing and RCing 👍😎👍 AOAH =Association of Addicted Hobbiest 🙏 SSPH =Stay Safe and Play Healthy My Friend
The Toyota Slan'Md Cruiser or the Toyota Urban Excursion Limited (combining the Toyota and Ford badges) would be cool names. You could even name it the Toyota Limbo Cruiser.
Honestly I’d stick with the 59 impala body, but that’s my opinion and not my rc either. It is different though running the Land Cruiser body though, keep up the good work.
Need ideas just look up them in Australia I've seen slammed 100 series on bags here but never juice... My mum actually has a 100 series LandCruiser but it's made for off road an towing I love driving it.. it's done a few trips around Australia
I thought these looked good in photos, but wow seeing it on video really shows how cool the bodies are. I wish somebody made a 51 Ford Victoria body. I could have an RC car to match my car :). Maybe I could find an STL for someone local to print
Thought it was going to be an Escalade at first haha that would’ve fit the culture well but this is going to be super cool and unique. Excited to see where it goes
Kewl project Matt! Since you are making a LC low rider how 'bout turning the 59 into a crawler? I know, I know, RedCat did it with the 64 and it was unique but a properly done 59 like you would build would be freakin' awesome. Just saying. Lovin' "What's on the Bench" !
It would be cool to take the Monte Carlo version and add accessories to make it look like the 1:1 lowrider the guys from Roadkill took off-road. I wonder if anyone in the crawler community has done that.
I've never been a fan of the square box on wheels look. I own 3 K-5's, but not because they look cool, just cuz it's an efficient design. In fantasy world? IE modeling? I want cool and interesting. But the coolest thing, is building something you think is cool and getting together with all us others who think their stuff is cool and all being cool together. You do awesome work. I hope to see it again.
I was a little horrified when you cut through the chassis of a $500. + RC car. But the new car has a lot of potential to be like an organized crime bosses car. Maybe go that direction and call it the King Pin. Maybe get a Scarface action figure to go with it.
Ever since these came out I instantly thought of the purple Jesse James lowrider 40 ford body that's 1/6 ish scale....(that has sat on my shelf for 4 years). I have debated slapping slash guts under it to make it move, but that's not very lowrider. As for the name of it... slamd cruiser
If ur trying to be creative then the LC body is good, else maybe one of the Chevy blazer bodies like the Traxxas Chevrolet Blazer (1972) or similar would be more scale . Either looks like a fun project. Good luck
Please please PLEASE put a sound system in there. Also, I need it to have a Cali tag on the back or if Florida of you going for a Miami or maybe Jacksonville thing.
@Scale Builder's Guild I hear ya...but its all about scale, right? Show me a lowrider that doesn't have a decent sound system lol. Driving a lowrider may not be your thing too but here we are hahahaha.
"I'm gonna review this thing....aaaand chop it RTF in half." You show no fear👍🙂👍
I think your next monthly mayhem needs to be to get these to crawl 😂😂
This is an absolutely perfect idea!! 😂
Yes please 🙏
Yes 🙌
But it must keep the hopping capabilities
Lowrider can be any vehicle, it is more of a mentality than the vehicle itself. I use to lowride back in the day, those rear skirts you were trying on are called sidewalk skirts. Can't wait till you finish the build.
I appreciate that you are very informative and also you are very articulate I like that you keep your room in order very nice.
Thank you! I appreciate you watching the video (and the mess is all hidden 😂).
Thanks for sharing the gifts you send..
R.C world forever.
1:45 ...Now that was funny!😆🤣
Always loved the look of a lowered K5 Blazer...
I think "Donkey Cruiser" will be perfect fit for it 🤣
The name should be. SLAMMED.
Really love that car trying to save to get really like the build.
Love the show
RC lowriders, literally minutes of fun!!!
Lol I just want the body oh I take reef servo too
Ok... I personally believe the body you need for this rig is a 70s- early 80s squarebody Suburban. Patina body with the old school white steelies. Absolute show stopper.
I did the same thing. I bought a extra floor pan and frame. Extended it with c channel and extra plastic. Using a vaterra suburban as body.
Love how its laying frame or as the streets say.. laying on its nutz..
The perfect body. I canNOT wait to see what you come up with on the "LandHopper" You best be putting spinners on it!! 🤣😂🤣😂
This is build is very intriguing. You got me glued to the screen for this one.
Thanks for watching!
The '59 is my favorite too! I would leave the skirts off too. Now that you've ruined the chassis send me the '59 body!😂
Man 59 impala was the best one. Little before my time but a American beauty.
Hi mate,
have the same body LC105. A friend of mine made it long time ago. Takes 2 years to get it done. Unfortunaly the mold is gone. Didn't done a lot of them. Mine is close to finish on a run-80 chassis. Best wishes Jens
“Florida Man” because, you may not be aware, but you’d almost certainly see someone in that state driving a 100 series with it slammed down tot the street top WITH those wire wheels on it.
Basically, you’ve nailed the look already, Matt.
That thing IS pretty cool. I was laughing like a kid when you were hopping the front end continuously 🤣
You should airbrush “praise the lowered” on the tailgate!
😂
I dig that lowrider, im humming ice cube was a good day
Well… you have “Jelly Bean”, it’s only fitting to call it “Gobstopper”…
I've been having trouble with my transmission on my 59 but there is a fix for it my gears kept wearing out whenever I would drive at full speed with the factory electronics turned all the way up. Keep in mind this was a stock setup I just increased the settings to the max. The gears seemed to self destruct. The fox that I've found was to add little washers on opposing gears(meaning one per gear) . My transmission seems much quieter now and able to drive at full speed without self destructing.
“This Tolowta is going to be fantastic” 😅🎉😂
the black body and chrome wheels makes it look like a london taxi
I really dig the low riders Redcat put out.
I just don’t know if I would run more than a couple batteries through it before I got bored and it just sat on the shelf looking cool.
If I was more of a modeling guy, I think it would be a great project to customize and really make it look awesome.
mines been sitting since i got it, was fun for a few hours figure the kids could play with it and they all hate it because its not fast
Can’t wait to see that low cruiser
I've enjoyed my 64 way more than I was expecting when I got it. This thing definitely needs to end up with some CEN f250 or f450 wheels
Nice LDC-23. Low Down Cruiser ‘23. 👍
Drift wheels...some sweet 3 wheel broadies..
That 200 looks like a Subaru Forester on that chassis... That could be an interesting build 🤔
I've been waiting patiently for you to get one of these and give it the SBG touch!
Can’t wait to see how this turns out. I always enjoy your videos. I’m thinking El Chapo.
Fun build for sure! How about TOYLOWTA lol
Hahahahaha YES KEVIN!!
Highlight of the week! 😊
Thanks!
I think a van body, or even VW minibus would work great!
oh you need the gold daytons for that sled!
Lowrider Land Cruiser is gonna be fantastic, can't wait to see it done. One thing I'd do is see about putting some huge wheels and low profile tires on it, really sell the look.
I ordered the Continental kit and the gold and chrome wheels, and the jevries club plaque
Enjoy!
Oh man!, I can't wait for episode 69 now....hehehe....
Heck Yeah Matthew Glad to see you enjoying the Fifty Nine Lowrider (mine in Blue too) I think @redcatracing and @jeveries done a Great job scaling these model's in detail 💯
That's a really neat way to extend the chassis to make it fit the rover body can't wait to see what you're creative mind and engineering skills do with this project 🎉🎊🎉
Lastly, if'n You're not gonna do anything with the extra chrome part's then I'm interested in them for my 59 Lowrider in Blue to "BLING" it out LOL 😁
✌🤠👍 HFLPRCing =Having Fun Laughing Playing and RCing
👍😎👍 AOAH =Association of Addicted Hobbiest
🙏 SSPH =Stay Safe and Play Healthy My Friend
Stay tuned! Thanks for watching and have a great weekend!
I can't wait until episode 500!
Project slam cruiser!!! Love your content and SBG.
Thanks! 👍
Deep dived lowrider land cruisers, found one from Australia with a roof top tent. Don't think it was the same series tho. Not going lie I liked it 🤷
Thank you. Ive been waiting to see someone do this.
Looks Awesome with that body. Gotta put some "sounds" in that build most definitely bro.
MIDWID!
I had a 64 sold it after stripping 2 trans gears just cruising around
great idea can't wait for the final design
It’s the Low Two Hundo!
The Toyota Slan'Md Cruiser or the Toyota Urban Excursion Limited (combining the Toyota and Ford badges) would be cool names. You could even name it the Toyota Limbo Cruiser.
Limbo Cruiser would be great
Nice, I cut my monte carlo a couple months ago to fit a caddy body I printed.
Honestly I’d stick with the 59 impala body, but that’s my opinion and not my rc either. It is different though running the Land Cruiser body though, keep up the good work.
Need ideas just look up them in Australia I've seen slammed 100 series on bags here but never juice... My mum actually has a 100 series LandCruiser but it's made for off road an towing I love driving it.. it's done a few trips around Australia
Looks like this will be an interesting project. We'll done
Thanks 👍
I've only seen one in Texas...
Perhaps L.A.
I would be tempted to put that impala body on a monster truck type platform.
Great vid Matt! Definitely felt the RC Everyday vibe on that one.
Awesome! Thank you!
This will be a fun build to watch you build.
I thought these looked good in photos, but wow seeing it on video really shows how cool the bodies are. I wish somebody made a 51 Ford Victoria body. I could have an RC car to match my car :). Maybe I could find an STL for someone local to print
Cool!
Thought it was going to be an Escalade at first haha that would’ve fit the culture well but this is going to be super cool and unique. Excited to see where it goes
I almost had a stroke when you were taking the saw to the chassis
WOW ! Cool Matty!
The Lowland Cruiser
Gotta make a new episode on this project!
Missed opportunity to make a Volvo wagon low-rider! Just kidding. Looks like a fun project.
Next time 😂!
Gotta put some speakers in the trunk, I saw rcsparks put a lol bluetooth speaker in his rc Raptor, and call it BoomBoxx
Neat, that's not for me though. Hate hearing music come out of an RC truck!
You could call it the bouncing brit 🤘y'all have a badass day🤘🍻🤘
🤘
Holy sh*t Matt you cut the chassis? lol can't wait to see what you come up with. But I can dig it.
love the body choice , good luck
Thanks!
Name…. Hmmm…… Swamp Donk-E. Weather it heavily with some CEN wheels and low profile tires.
The Slamd Cruiser.
I must admit you are quite insane! 🤣🤣🤣
Kewl project Matt! Since you are making a LC low rider how 'bout turning the 59 into a crawler? I know, I know, RedCat did it with the 64 and it was unique but a properly done 59 like you would build would be freakin' awesome. Just saying. Lovin' "What's on the Bench" !
It would be cool to take the Monte Carlo version and add accessories to make it look like the 1:1 lowrider the guys from Roadkill took off-road. I wonder if anyone in the crawler community has done that.
I've actually thrown around that idea quite a bit. Just haven't pulled the trigger to get it yet.
The landhopper haha
I've never been a fan of the square box on wheels look. I own 3 K-5's, but not because they look cool, just cuz it's an efficient design.
In fantasy world? IE modeling? I want cool and interesting. But the coolest thing, is building something you think is cool and getting together with all us others who think their stuff is cool and all being cool together.
You do awesome work. I hope to see it again.
I think monthly Mayham with that 59 chassis speed demon would be Siick
Did you say episode 29 and then the graphic say 28? Just asking. Always love your content. Did you do that on purpose?
Sometimes the best of us make mistakes.
I was a little horrified when you cut through the chassis of a $500. + RC car. But the new car has a lot of potential to be like an organized crime bosses car. Maybe go that direction and call it the King Pin. Maybe get a Scarface action figure to go with it.
Surely with that body it's now a Land Rider Not a Land Cruiser, looks like its gonna be a fun build.
Call it the "landscraper" or "landdragger"
Project name... Slammer!! All day!! Would the escalade body fit? Just curious.
It be cool. Looking good
Comes with a 50/50 warranty. If it breaks in half, you own both pieces.
Ever since these came out I instantly thought of the purple Jesse James lowrider 40 ford body that's 1/6 ish scale....(that has sat on my shelf for 4 years). I have debated slapping slash guts under it to make it move, but that's not very lowrider. As for the name of it... slamd cruiser
Lol I have that car too somehow door missing . That's good idea I never though of using slash I'm going see if I still have it
Or, The Truffle Shuffle…
If ur trying to be creative then the LC body is good, else maybe one of the Chevy blazer bodies like the Traxxas Chevrolet Blazer (1972) or similar would be more scale . Either looks like a fun project. Good luck
This is gonna be awesome!
I want to do this so bad!! But with the already done rc4wd blazer body. I just bring myself to spend all that money on an rc I will barely use haha
The Toyota is a great choice way to make things interesting
Should’ve done a jeep ;)
This is an excellent series and I love the soon-to-be Landhopper!
mann looks super fun this rc love it funny stuff🤣🤣🤣
the land slammer? Low Cruiser XD land bouncer?
It hops man!!!!!
Maybe a chrome lunchbox body 🤔
Please please PLEASE put a sound system in there. Also, I need it to have a Cali tag on the back or if Florida of you going for a Miami or maybe Jacksonville thing.
Pass! I'm not a fan of music in my RC's.
@Scale Builder's Guild I hear ya...but its all about scale, right? Show me a lowrider that doesn't have a decent sound system lol. Driving a lowrider may not be your thing too but here we are hahahaha.
Lowyota... Pavement Princess...
The long rider! :D
Herman Munster's Shoe
Midnight in Montreal
How about a Bro-dozer dancing dually?