I have a 2018 camaro ss 1le looking for a similar setup. Only mod i have on my camaro is a k&n air intake.. What would i need to get set up like this??
Can't understand why people didn't like the front end for that year it doesn't do nothing either way for me not worse not better than the current design I like the 16 and 17 year front ends the most other than the ZL1 17 and up front and Hood
I really like to thank you for your video. It shows me a lot I have a 2022 Camaro LT one completely stock. It is very fast but I want to get more horsepower so I guess I need a new throttlebody a cam and some headers once again, I want to thank you very much and I hope you keep putting out good videos. Thank you.
I haven’t done that in a 5.3 yet. Oh for sure. Heads and ethanol will put it at/over 600. Ethanol alone picked up 30-35 on these combos. Really awesome cars
I was thinking about doing a twin turbo vs supercharging my 2ss 1le. I was thinking it would be great something different as most keep them NA or supercharge them. My question is it worth looking at twin turbo? Is it still reliable? I have 2 years until I do anything from stock just not touching it until my 3 year manufacture warranty is up until I touch it as anything that I will do would void it.
Thats nice! Better than where I am, with such an old ls1, I'd have to do heads, cam, lifters, pushrods, gaskets, bolts, springs, trays, oil pump, timing chain, balancer, intake, o-rings, etc.. or just swap an ls3 in there with a few harnesses.
Where’s the throttle body from ? I have a lt2 manifold as well but I’m not to sure if the throttle body off the c7 stingray fit . I’m assuming it should since it’s also a lt1
Going from LS3 to LT1 a cam swap is no longer a simple bolt-on either and expensive. Im not a fan of half the engine being removed to do a cam on LT anything newer.
Not a fan of these Camaros buh I might make the switch for how capable these engines can be for modifications vs a Mustang Coyote series or Challenger 5.7 Hemi. Expensive, but for what I would WANT it to do, better than a ZL1 💯 Very impressive numbers, I just hope I can find one and put a active exhaust, dont want it loud all the time! Hope its reliable too, at least before moving onto a forced induction setup.
Only down side is now cams are not an easy swap anymore. Cam, LT's, intake, TB, and mani your looking at $12k. might as well just slap a supercharger on, mild boost and bam, 550-560 rwhp for 10k.
You may already know about it and/or you may not be interested, but I know all too well what it's like to miss a car/truck that you built by hand after you've sold it, so with that being said, I just saw where your old mandingo camaro is currently for sale out in Cali..listed on the LS1 marketplace.
What's a build like this cost? And what exhaust does this customer have front to back? I've watched a few of your videos I think I'm sold on the BTR stage 2 cam. I live 9 hours away from your shop.
@@MasterCarguy44-pk2dq here’s one we did with an $18k bill. The blower alone was $9,500. Kooks headers about $2,400. we didn’t do a camshaft. So the possibility of lifter failure is still there. Blowers are certainly less labor than can/heads etc. but with parts costs these days. It’s insane how quickly modding these things add up.
Hey bud, this is my car, currently it has a BTR 225 cam, LT2 intake manifold, 95MM katech throttle body, kooks 2in longtube headers, flex fuel sensor for E85. Dynod at 535whp on pump gas and shoukd be about 560-570whp on E85
Hoepfully you have johnson lifters and some upgraded valve springs on that list of "boltons". These push rods are not reliable at all. You beat the piss out of these things with factory lifters and springs you will eventually break it.
No one has false hopes. Everyone knows what that takes. Don’t take the title so seriously. There isn’t enough letters to describe a step by step process. But let’s be technical since you want to bring it up. It literally was installed be removing and installing bolts.
Builds like this bring hope back to the budget racers,all motor pump gas class
Wait did you say budget racer? A cam install is $6500 alone for this application 😅
And the cars like 50k
@@jromez28 when your talking road racing that's budget
@@lucianholbrook3966 budget would be like sbc cam and 200 shot
@@jromez28it what city ? Lol
Thumbs up for using SAE correction. Too many shops and individuals use STD to inflate their numbers.
I’ve done it on a few. But I’d rather it to be just a few more close to real life myself lol
Yup I can count only 3 shops I've found on UA-cam using SAE numbers.
This is my buddies camaro! Cannot wait to get a ride in it and see what magic you have done:)
Heck yea! We will love it!
Beautiful camaro! Sounds great and should be a great performing street car that’s reliable. 👍
Great Video 🤙🏼amazing looking Camaro
I have a 2018 camaro ss 1le looking for a similar setup. Only mod i have on my camaro is a k&n air intake.. What would i need to get set up like this??
I could listen to car idle as my white noise machine at night xD
I mean, you could. Remote start will give you a good 15 minutes of therapeutic noise 😅
Car sounds so 🔥🔥🔥
Ok, can we do this to my 2021 6.2l Trail Boss? I want to do the switch of those cylinder cut out lifter anyway. Cam, exhaust, tune
Do you have the mod list of this car?
Great video, very informative. With these mods what would a 1/4 time be?
I have an A10 same modifications minus the cam. I'm nowhere close to these numbers. It was 102 degrees the day we put it on the dyno tho. Great vid 👍
Can't understand why people didn't like the front end for that year it doesn't do nothing either way for me not worse not better than the current design I like the 16 and 17 year front ends the most other than the ZL1 17 and up front and Hood
Sounds pretty sweet
I love my BTR cam!
Is that a Brian Tooley racing ?
@@samc1414yeah
Awesome to the chop chop .. was that a third gear … 3000rpm roll ! Sheshhh sounds good
I really like to thank you for your video. It shows me a lot I have a 2022 Camaro LT one completely stock. It is very fast but I want to get more horsepower so I guess I need a new throttlebody a cam and some headers once again, I want to thank you very much and I hope you keep putting out good videos. Thank you.
Do cylinders heads and it’ll pick up even more
I have a 2020 SS 1LE in Garnet Red Tintcoat exactly like this one, but this one sounds a lot better and has a little more power!😂
Quick question all I need is a x pipe before the spin tech 6000 ! On a 2015 camaro ss 6.2 to sound alittle like the vette !! Thanks in advance
Such a good looking car. I wonder what some heads would add to this. Would this cam be too big to make good power in a 5.3 RCSB?
I haven’t done that in a 5.3 yet.
Oh for sure. Heads and ethanol will put it at/over 600.
Ethanol alone picked up 30-35 on these combos.
Really awesome cars
@@NorthernPerformanceCarswhat’s your estimated whp on pump gas with heads? What heads would you recommend?
So much would it cost for all the upgrades this car has? You gotta include with these videos so we can get a idea
When tuning these Gen V motors N/A, do you find that they are knock limited, or just run out of power and no sense putting more timing in it?
im sure you answered your own question. when tuning a vehicle thats usually one of the limitations, hence the reason you need a higher octane fuel.
I was thinking about doing a twin turbo vs supercharging my 2ss 1le. I was thinking it would be great something different as most keep them NA or supercharge them. My question is it worth looking at twin turbo? Is it still reliable?
I have 2 years until I do anything from stock just not touching it until my 3 year manufacture warranty is up until I touch it as anything that I will do would void it.
Thats nice!
Better than where I am, with such an old ls1, I'd have to do heads, cam, lifters, pushrods, gaskets, bolts, springs, trays, oil pump, timing chain, balancer, intake, o-rings, etc..
or just swap an ls3 in there with a few harnesses.
Love thatt red
Nice Whip!
Where’s the throttle body from ? I have a lt2 manifold as well but I’m not to sure if the throttle body off the c7 stingray fit . I’m assuming it should since it’s also a lt1
Do you have a part number for this cam
So it has headers and cats still? Thank you.
Going from LS3 to LT1 a cam swap is no longer a simple bolt-on either and expensive. Im not a fan of half the engine being removed to do a cam on LT anything newer.
Do you have ported heads and you need to upgrade the stock converters
These heads were stock.
It was a stick shift.
But yes I recommend a 3,600-3,800 for that cam.
Can you give the list of mods??
Not a fan of these Camaros buh I might make the switch for how capable these engines can be for modifications vs a Mustang Coyote series or Challenger 5.7 Hemi. Expensive, but for what I would WANT it to do, better than a ZL1 💯 Very impressive numbers, I just hope I can find one and put a active exhaust, dont want it loud all the time! Hope its reliable too, at least before moving onto a forced induction setup.
What numbers do you think an automatic would make with the same mods?
490-500? With a locked converter they are not too bad.
So non-ported Lt2 with ported 95mm TB?
Sounds badass
Does the lt2 intake come off the vettes
Yeah the c8 2020-2023
Damn man i have a scatpack im gonna get me a camaro instead i love camaros
Sounds amazing!
Spend some money it’ll really wake em up …..gains 2whp 😆 “that’s good for 2 mods”
How much can the six speed manual take?
More than the engine can handle, it's stout
Only down side is now cams are not an easy swap anymore. Cam, LT's, intake, TB, and mani your looking at $12k. might as well just slap a supercharger on, mild boost and bam, 550-560 rwhp for 10k.
You may already know about it and/or you may not be interested, but I know all too well what it's like to miss a car/truck that you built by hand after you've sold it, so with that being said, I just saw where your old mandingo camaro is currently for sale out in Cali..listed on the LS1 marketplace.
Most definitely. If I had the spare cash, space, and time to use it. I’d go get it in a heartbeat.
Oh I definitely understand what that's like. Same reasons I keep giving my gf when she asks me why I don't want a wife right now
Like everything you seem to touch, that car is one sick ass street rod
@@lstruckthings7048 lol non married gang stand up!
What's a build like this cost?
And what exhaust does this customer have front to back?
I've watched a few of your videos I think I'm sold on the BTR stage 2 cam. I live 9 hours away from your shop.
This was about $10-11k parts and labor.
Kooks headers and oem cat back/mufflers
@@NorthernPerformanceCarsoutch. Can get more pwr with a superchsrger for less $$.
@@MasterCarguy44-pk2dq ua-cam.com/video/LS7leL3i3Vw/v-deo.html
@@MasterCarguy44-pk2dq here’s one we did with an $18k bill. The blower alone was $9,500. Kooks headers about $2,400. we didn’t do a camshaft. So the possibility of lifter failure is still there. Blowers are certainly less labor than can/heads etc. but with parts costs these days. It’s insane how quickly modding these things add up.
What intake is that?
Lt2 intake
When 530 hp was considered a "beast," it was back in before 2010 lol
Is this a 1le?
I wanna say yes bc it looks exactly like mine
@@TristenColeno engine difference
@@blakenehring9622thank you for info
Beautiful car, if you’re dumping $10,000 and up on mods you might as well go used ZL1
ZL1’s are not cheap used or new and stock baseline averages out around 580-590 HP to the wheel not 655 sadly
Whats the idle speed on that?
I can’t remember specifically. I believe it was 750-775
@@NorthernPerformanceCars Mine is a 17' SS 6 speed. The stock idle is set at about 600rpm. How much do you charge to set my idle at about 800rpm?
my ls2 makes within 15hp with the same mods
Goid thing its the stick, because the DOD removal/swap is $3500-4500 itself.
What all mods does he have ??
Hey bud, this is my car, currently it has a BTR 225 cam, LT2 intake manifold, 95MM katech throttle body, kooks 2in longtube headers, flex fuel sensor for E85. Dynod at 535whp on pump gas and shoukd be about 560-570whp on E85
Oh and a CAI
@XXVIII28 would you happen to have a part number for the cam
@@miketarabochia3462 Google it
@@XXVIII28are you on stock converter?
Hoepfully you have johnson lifters and some upgraded valve springs on that list of "boltons". These push rods are not reliable at all. You beat the piss out of these things with factory lifters and springs you will eventually break it.
A cam is not a bolt on your giving people false hope
No one has false hopes. Everyone knows what that takes. Don’t take the title so seriously. There isn’t enough letters to describe a step by step process.
But let’s be technical since you want to bring it up.
It literally was installed be removing and installing bolts.
@@NorthernPerformanceCars "handful of Bolton's and cam" it's 2 more words to be correct
@@NorthernPerformanceCars full Boltons and e85 on stock engine will get you 500hp tops