I just bought a phase 4, 29. Great bow. My previous was a bow tech Guardian, I shot that over 10 years. My first compound. Definitely slower but the Mathews so easy to pull and lighter. I’ll be shooting the phase 4 for a long time.
At the beginning of this video around the 6:00 minute mark. Dan said they are offering a job that’s 20 hours a week. I couldn’t help but think of this quote “there’s not a single job in this town notta nothing” “ yea unless you wanna work 40 hours a week” 😂😂😂 Greatest movie ever made!!
If it's truly a 4-5dB reduction over the old bow, that's about the same reduction I've measured across the gamut of shooting a 400gr arrow vs 1000gr. I'd say that's pretty significant. I seem to be in the minority based on the comments but I like quiet, they were already quiet, so measurably quieter is impressive. Sure, I'd be nice if they had an easier tuning system, but as an individual as opposed to a shop, I set it up once in the spring and then rarely need to touch it again throughout a season. Would be nice if they offered 80# mods.
How do you guys think that rubber will hold up between the limbs? I'm curious to see if it'll crack or start to deteriorate like most rubber parts do. Is there a different wax we will need for the rubber on the limbs maybe?
Doesn’t Mathew’s have a lifetime warranty? I keep seeing people asking about this but in their warranty it states flaws in materials. I’m sure if this turned out to be a defect they’d fix this at no cost to you, otherwise you’d piss off a lot of people that like to buy their new bows every couple years. I can’t see them doing screwing people like that.
4-5dB is no joke...doesn't sound like much. Josh's estimate of 20% is likely quite close to being correct. dB is logarithmic so hard to talk percent but that reduction is significant.
I just bought my new phase 4 and am extremely satisfied with it Couldn’t wait for the new lift to come out but Matthews keeps making improvements and I think they are blowing the market away This phase 4 is a beast and I’m only 60 pounds I’ve already Robin Hooded one Never done that before
This is the bow I would probably go however I bought a V3X last year so if everything is the same except for the limbs they ought to do a upgrade limb kit for previous models. Thanks for your honest opinion it helped me make my decision earlier this year when I bought a new bow
Have you ever wondered why your year old Mathews doesn’t feel as smooth compared to the latest model in your pro shop? It’s your cams bearings they’re probably dry or worn.
Josh is always super professional and pretty serious when it comes to his craft. I know that's why I really enjoy his channel. But.... I love seeing you guys cut up and give each other holy hell! Work isn't work when you are with your friends....
I have been shooting since I was 8 years old, and have a total of three years bowtech experience, I am very enthusiastic about archery, fell in love with Mathew’s, and how fast they have been growing since they opened, I live in south east WA, and love your guys’ videos, I am willing to work for Josh (Podium Archer), I just would need a full time position and not 20 hours a week.
Mounted rubber dampening strips on my V3X as soon as I got it. The db drop was 6.2 vs the bare bow. You don’t really need to get a new bow. Mathews just split the limbs to dampen them on this new model. Good move for them but you can accomplish the same results on your own if you want. Been doing it to every bow I’ve owned for years. Dang I should have patented it?
I know you guys like tying the limb driven cord to the limb. Have you guys had issues with the cord slack catching on the bottom of the quiver? I had to tie mine to the yolk splitter to keep if from catching. Running the phase 4 and v3x 33. Id rather have it on the limb, but I cant stop it from hanging up. Thanks for any info.
Excited to hear more to come about this bow. Have honestly never shot a Mathews. Certainly want to get my hands on one and try it out. Love the content and excited to hear ya'll are coming back to Texas for TAC. Planning shooting 2 TAC's this year. Hopefully San Antonio and also Big Sky.
Awesome video as always🤙 I'm still rocking the vertix and i haven't seen a good reason to upgrade till now. That new phase 4 i quite literally the next big evolution in mathews bow lineup after the vertix.
The Shadow Creek grips are freaking awesome. I put the ElkShape ones on both my bows and have absolutely fell in love, my shot are more precise. Unfortunately I don’t think I’ll be able to get the new bow. Still awesome bow build.
Love my gas ghostXV camo on my V3X33 so far. Had to add twists to the cables to get it to spec, but no stretch so far and not a single bit of peep twist.
Just bought the same string and 75# mods for my 33 can't wait to get them on. Interesting about the needed twists to get it in spec, I'll have to remember to mention that to the guys at the shop.
I'm not quite sure about the rubber between the limbs? As much as I shoot it would probably wear out and squeak like crazy.. I think I'll stick with my dialed in V3x for a few more years.. thanks for the solid review.. ; After shooting the Phase 4 yesterday I was super impressed with the much noticeable sound and deadness. I may consider a limb and pocket update in a year if the results are positive on how they hold up.. I still dig my v3x
If they can make tires that can last over 75,00 miles, rubber building isolators rated for 60 years of seismic activity, and used as O-rings on space shuttles, I’m sure the small strip of rubber will hold up.
I tried shooting the thumb button for a while and loved it but I’ve had shoulder surgery so it tweaks my shoulder to where I’m in pain. Shooting a finger release is easier on my shoulder. It is easier to draw back with a handheld release vs a finger release. I also find that I anchor differently with a handheld. With a finger release I anchor in the same spot. I like it.
While I do agree as I shoot the rx7 ultra its hard to say that because the price difference. I didn't give that for mine but most guys see the price of the rx7 and ultra and they're eye twitches a little lol
@@bmocaby9747 I shoot the ultra also and it’s such an insane bow! And last year I would have agreed with you on sticker prices but the new prices on the Mathews are crazy. The Phase 4 is already $1,300-$1,500, plus another $700 for the stabilizers (the only thing the phase 4 has). An extra 2-300 bucks for a bow that does everything better is well worth it, especially when you’ll easily save that on stabilizers
@bigz5262 that's true I was just talking to my step brother who actually happens to be the main bow tech and rep around here about the price jump on them. I actually had a v3x 33 I had the first one their shop got in and was torn between that and rx7 ultra but went the 33 route because I was trading in a v3 31. Figured it'd be a easy adjustment. Wrong I should've traded for rx7 ultra originally and saved myself the time. And the sad part is the phase 4 is the v3x 33 with the new limbs. Which to me seems a bit sketchy but I may be wrong. The stabilizer I don't even consider that a upgrade. That's just a throw in they added that doesn't do a whole lot other than cost more money. Kinda like the inline sight. I'm honestly more impressed with the Mathews Image they released that has a max 50lb draw still shooting 330fps with a 6" brace height. But I don't see myself buying another bow for a while. And if I do, I'm keeping the ultra to add to my collection of my favorites lol
@@bmocaby9747 good move. I think the phase 4 and v3x are awesome bows but they’re still not as nice as the rx7. I’d like to shoot the vtm and phase 4 side by side for a closer comparison. But there’s no way I’m going to change either. I think the only big improvement Mathews should make is to build a carbon bow. They’ve pretty much maxed out the potential of an aluminum
@bigz5262 the only problem I see with the phase 4 is limbs. I don't see that being a good outcome long term. I do agree though the rx7 ultra is on another level. I like the look of the new elite and Bowtech. Not enough to ever get rid of the ultra but id like to shoot them anyways.
Great video on the new hotness that has been dropped this late fall among many other great bows. If I had the $$$ I would definitely have a in close single to tri pin set up with a heavier weight arrow with great structural integrity for whitetail deer 🦌 and then a more balanced long range setup with a slider sight and arrows in the 425-475 range for pronghorn and more open country deer 🦌 etc…
I’d like to see a comparison in sound with the same release on both bows. I shoot a Carter Wise Choice as well and it’s a loud release compared to any index release I have shot. I used to shoot a Spot Hogg Wise Guy and it’s much quieter than the Wise Choice. So maybe if y’all get the chance to test both bows with the decibel meter again shoot the same index release on both. I think that was a B3 Hawk you were using.
I think the only thing for me is how would the wear n tear on the rubber between the 2 limbs last . But other then that the bows is pretty sick . I'm still rocking my vertix 🤙🤙
“They didn’t change anything” “Ok….then don’t get the bow”- realist statement made 😂 shoot what you like folks, it’s pretty simple. Got a sub from me 🤘🏼
Dan you should try the TRX 36 over the 34. I understand you have a short draw length but I think you’ll have more of a target bow experience with the 36. The TRX 34 is more of a kid’s target bow/ 3d/ hunting bow
Limb driven failed on me twice… since then I’ve been using QAD, I served it through the down cable. Both are great rest, comes down to personal preference. Love da videos 🤙🏽🤙🏽
You boys have to get yiurselves to Australia.. You lot would love it, we don't have a very large hunting industry here, but we've got good hunting.. Water Buffalo, wild bulls, 6 types of deer, feral pigs and feral goats, hopefully you'll get to see it here before it's all gone or our laws get changed.. (the greenies are trying to get bowhunting made illegal).. Anyway thanks again for all of your brain data, I rely on it to learn.. Cheers from Australia 👍
I think it’s awesome that you’re going to do a Vegas-style shoot. I look forward to that video. I always look forward to new video drops from y’all. Keep up the good work. Thanks for what y’all do
thoughts on someone who stuck with the v3 31 because the 31 is just a perfect sweet spot, 29 feels small and 33 is hard to get through the wisco swamps and brush.... really wanting the integrate /bridgelock/low pro goodies though...
another great video from Dan and crew. Pure authenticity. It will be interesting to see more testing. I'd like to hear more head-to-head Comparisions so those of us that have to buy will know whether it's worth the extra or not. especially in this market! Thanks Crew!
Rubber dry rots over time so have to wonder if Mathews did anything special to address this so the dampening material doesn't breakdown over time? Other than that concern, the bow looks solid. I've always been a fan of having my hunting bows be as quiet as possible.
You guys are awesome great content looking forward to stopping out in a couple days Quick observation On the landslide I don’t need the offset bracket in the bridge lock did you try sighting it in without offset bar to see your windage gain ?
I will admit that I really like shadow creeks side plates they’re a little thicker compared to the UV and Mathews side plates and it ergonomically superior in comparison
FYI, I have the Axcel Accutouch carbon pro with the larger head and I didn't need the offset bracket. The scope is pushed all the way in, but it's not necessary to get the bracket IME.
I have the Halon 6 but I feel the bow is too cramped, I can't seem to stretch out on it. 30" but I am 31.5 when I measured myself with the formula. May have to try it, no way in hell will I pay $269 for one stabilizer $200 for an adjustable v bar and $259 for the back stabilizer. I could pick up a used bare v3x 33 cheaper than stabilizer kit for the new bow which is crazy. But I would buy the bare bow though.
Bro calling me out like that hahah, you know all you gotta do is shoot me a text and I’ll build what ya want, as long as MFJJ unlocks the shop for me haha. I need to swing in and chat with him to see what all he needs but he knows I’d gladly help out, just been a chaotic last couple years with family stuff. And so you know I watch everyone brother, love your vids and what you have going on here man, keep it up!
What I don't get, if the new limbs decreased noise, then why didn't they decrease the weight of the bow and keep the noise the same as last year? They already lead in noise reduction. However, they are heavy bows. I like my Vertix but it is like holding a brick.
I think you need to test stabilizers to see which mount is quieter to see if it makes any difference. It might make a difference and might not make any.
@weirdmood8102 always be tinkering my friend. If there is no noticeable difference would it be nice to save yourself some money that would buy you a half dozen more arrows or more?
@@BirchBarkOutdoors no doubt. I honestly don't see the new changes being very beneficial to me. I just bought a v3x 29 to start hunting with, So I highly doubt being so new to the game that I would be able to see any real difference in the two bows. I definitely think it's great if they got the bow quieter though, So that's great for whoever is going to be upgrading. I literally just got my bow fully built last Saturday, So I just can't see spending another cent , after dropping 3k on this damn thing. 😄 I'm excited to start a new chapter with it though! Best of luck tobyou this season, Buddy.
Equipment is overrated everywhere - best example is the whole audiophile hobby.. they listen to equipment instead of listening to music and then wonder why they don't enjoy the immediacy of sound anymore (no passion, just reflection after reflection - addiction)...
1. Curious if the lawsuit against Hamskea will affect if epsilons are able to be sold after. 2. Still wondering why Vaportrail is not on the string list
1. Time will tell 2. They simply got a fraction of the feedback, amongst other boutique string makers, we'll be sticking with the top 3-4 based on feedback. -Dan
I just bought a phase 4, 29. Great bow. My previous was a bow tech Guardian, I shot that over 10 years. My first compound. Definitely slower but the Mathews so easy to pull and lighter. I’ll be shooting the phase 4 for a long time.
At the beginning of this video around the 6:00 minute mark. Dan said they are offering a job that’s 20 hours a week.
I couldn’t help but think of this quote “there’s not a single job in this town notta nothing”
“ yea unless you wanna work 40 hours a week” 😂😂😂
Greatest movie ever made!!
Love watching Josh build out bows. Love watching the Bros banter.
There’s so much technology that goes into designing it. That is a sweet set job with the bridge lock stabilizer. Good luck with the subscriber hunt!
I just ordered a L.h phase 4 .29 for my 1st Boe iv ever had as an adult I'm really excited for the upcoming bow season 🙌
Great videos full of information
If it's truly a 4-5dB reduction over the old bow, that's about the same reduction I've measured across the gamut of shooting a 400gr arrow vs 1000gr. I'd say that's pretty significant. I seem to be in the minority based on the comments but I like quiet, they were already quiet, so measurably quieter is impressive. Sure, I'd be nice if they had an easier tuning system, but as an individual as opposed to a shop, I set it up once in the spring and then rarely need to touch it again throughout a season. Would be nice if they offered 80# mods.
How do you guys think that rubber will hold up between the limbs? I'm curious to see if it'll crack or start to deteriorate like most rubber parts do. Is there a different wax we will need for the rubber on the limbs maybe?
My thought for sure.
Doesn’t Mathew’s have a lifetime warranty? I keep seeing people asking about this but in their warranty it states flaws in materials. I’m sure if this turned out to be a defect they’d fix this at no cost to you, otherwise you’d piss off a lot of people that like to buy their new bows every couple years. I can’t see them doing screwing people like that.
4-5dB is no joke...doesn't sound like much. Josh's estimate of 20% is likely quite close to being correct. dB is logarithmic so hard to talk percent but that reduction is significant.
Can confirm: behind the scenes in the house was non stop laughter. Most of it directed at Jake... which was well deserved.
Lol you guys are having so much fun! On a scale of one to ten how buzzed are you? NM keep it coming!
I just bought my new phase 4 and am extremely satisfied with it Couldn’t wait for the new lift to come out but Matthews keeps making improvements and I think they are blowing the market away This phase 4 is a beast and I’m only 60 pounds I’ve already Robin Hooded one Never done that before
so so so so looking forward to the string showdown been looking for this for years.
DAN!!!! I have made strings in the past and I would do it full time I love everything archery I have not rifle hunted in god only know how long
Truly the most informative guys for me on the subject of archery thanks again for some great info 👍
This is the bow I would probably go however I bought a V3X last year so if everything is the same except for the limbs they ought to do a upgrade limb kit for previous models. Thanks for your honest opinion it helped me make my decision earlier this year when I bought a new bow
The limb pockets are wider. Can’t just swap them out
Great Vid guys. I would love to learn to setup bows and do all the work strings and everything. I think it would be fascinating
Have you ever wondered why your year old Mathews doesn’t feel as smooth compared to the latest model in your pro shop? It’s your cams bearings they’re probably dry or worn.
Josh is always super professional and pretty serious when it comes to his craft. I know that's why I really enjoy his channel. But.... I love seeing you guys cut up and give each other holy hell! Work isn't work when you are with your friends....
I used ThreadZ on my 29 this year and loved them. Great family owned company, shipped super fast
I have been shooting since I was 8 years old, and have a total of three years bowtech experience, I am very enthusiastic about archery, fell in love with Mathew’s, and how fast they have been growing since they opened, I live in south east WA, and love your guys’ videos, I am willing to work for Josh (Podium Archer), I just would need a full time position and not 20 hours a week.
And I have been looking for a new place to try and make a career out of archery. And would really enjoy the opportunity
Mounted rubber dampening strips on my V3X as soon as I got it. The db drop was 6.2 vs the bare bow. You don’t really need to get a new bow. Mathews just split the limbs to dampen them on this new model. Good move for them but you can accomplish the same results on your own if you want. Been doing it to every bow I’ve owned for years. Dang I should have patented it?
Where do you mount the rubber strips at? I’m very interested in what you’re talking about but can’t understand where you wouldn’t mount them at. 👍🏼
What strips did you use?
I’d be curious how you did that as well
I know you guys like tying the limb driven cord to the limb. Have you guys had issues with the cord slack catching on the bottom of the quiver? I had to tie mine to the yolk splitter to keep if from catching. Running the phase 4 and v3x 33. Id rather have it on the limb, but I cant stop it from hanging up. Thanks for any info.
Excited to hear more to come about this bow. Have honestly never shot a Mathews. Certainly want to get my hands on one and try it out. Love the content and excited to hear ya'll are coming back to Texas for TAC. Planning shooting 2 TAC's this year. Hopefully San Antonio and also Big Sky.
Awesome video as always🤙 I'm still rocking the vertix and i haven't seen a good reason to upgrade till now. That new phase 4 i quite literally the next big evolution in mathews bow lineup after the vertix.
The Shadow Creek grips are freaking awesome. I put the ElkShape ones on both my bows and have absolutely fell in love, my shot are more precise. Unfortunately I don’t think I’ll be able to get the new bow. Still awesome bow build.
Love my gas ghostXV camo on my V3X33 so far. Had to add twists to the cables to get it to spec, but no stretch so far and not a single bit of peep twist.
Just bought the same string and 75# mods for my 33 can't wait to get them on. Interesting about the needed twists to get it in spec, I'll have to remember to mention that to the guys at the shop.
I'm not quite sure about the rubber between the limbs? As much as I shoot it would probably wear out and squeak like crazy.. I think I'll stick with my dialed in V3x for a few more years.. thanks for the solid review..
; After shooting the Phase 4 yesterday I was super impressed with the much noticeable sound and deadness. I may consider a limb and pocket update in a year if the results are positive on how they hold up.. I still dig my v3x
If they can make tires that can last over 75,00 miles, rubber building isolators rated for 60 years of seismic activity, and used as O-rings on space shuttles, I’m sure the small strip of rubber will hold up.
Great reveiw and tips for people looking into going new for next season. Thanks and keep up the great work.
You have a solid squad Dan, jake,Tim,MFJJ.
Love your banter, keep it up guys
Hell yeah, come back to Texas!!! Stoked to hear that, can we hold you to it?
I tried shooting the thumb button for a while and loved it but I’ve had shoulder surgery so it tweaks my shoulder to where I’m in pain. Shooting a finger release is easier on my shoulder. It is easier to draw back with a handheld release vs a finger release. I also find that I anchor differently with a handheld. With a finger release I anchor in the same spot. I like it.
Try an rx7 if you think Mathews are quiet. These bow build videos are always a lot of fun
While I do agree as I shoot the rx7 ultra its hard to say that because the price difference. I didn't give that for mine but most guys see the price of the rx7 and ultra and they're eye twitches a little lol
@@bmocaby9747 I shoot the ultra also and it’s such an insane bow! And last year I would have agreed with you on sticker prices but the new prices on the Mathews are crazy. The Phase 4 is already $1,300-$1,500, plus another $700 for the stabilizers (the only thing the phase 4 has). An extra 2-300 bucks for a bow that does everything better is well worth it, especially when you’ll easily save that on stabilizers
@bigz5262 that's true I was just talking to my step brother who actually happens to be the main bow tech and rep around here about the price jump on them. I actually had a v3x 33 I had the first one their shop got in and was torn between that and rx7 ultra but went the 33 route because I was trading in a v3 31. Figured it'd be a easy adjustment. Wrong I should've traded for rx7 ultra originally and saved myself the time. And the sad part is the phase 4 is the v3x 33 with the new limbs. Which to me seems a bit sketchy but I may be wrong. The stabilizer I don't even consider that a upgrade. That's just a throw in they added that doesn't do a whole lot other than cost more money. Kinda like the inline sight. I'm honestly more impressed with the Mathews Image they released that has a max 50lb draw still shooting 330fps with a 6" brace height. But I don't see myself buying another bow for a while. And if I do, I'm keeping the ultra to add to my collection of my favorites lol
@@bmocaby9747 good move. I think the phase 4 and v3x are awesome bows but they’re still not as nice as the rx7. I’d like to shoot the vtm and phase 4 side by side for a closer comparison. But there’s no way I’m going to change either. I think the only big improvement Mathews should make is to build a carbon bow. They’ve pretty much maxed out the potential of an aluminum
@bigz5262 the only problem I see with the phase 4 is limbs. I don't see that being a good outcome long term. I do agree though the rx7 ultra is on another level. I like the look of the new elite and Bowtech. Not enough to ever get rid of the ultra but id like to shoot them anyways.
Great video on the new hotness that has been dropped this late fall among many other great bows.
If I had the $$$ I would definitely have a in close single to tri pin set up with a heavier weight arrow with great structural integrity for whitetail deer 🦌 and then a more balanced long range setup with a slider sight and arrows in the 425-475 range for pronghorn and more open country deer 🦌 etc…
I’d like to see a comparison in sound with the same release on both bows. I shoot a Carter Wise Choice as well and it’s a loud release compared to any index release I have shot. I used to shoot a Spot Hogg Wise Guy and it’s much quieter than the Wise Choice. So maybe if y’all get the chance to test both bows with the decibel meter again shoot the same index release on both. I think that was a B3 Hawk you were using.
Dude. I was thinking about going to big sky to meet you guys. Now I'll just go to SD again 😃
Definitely need that press drill adapter video...
Great vid gents!!
BriteStrings out of Washington State, Owner is a Vet and makes great strings.
Would love to get that hat dan...signed by all the elk shape guys... .
Is the sound difference in part from the different releases? I know my handheld is louder than my wrist strap. Cool video fellas
I believe speed will be identical when the phase 4 gets shot and broken in. Even custom strings need to be broken in
I’m still up in the air if I want to upgrade my hallon 32 for a new bow or keep rocking it for another year or 2
TAC SD. Do it guys!
Thinking about switching to a index release also, what release are you using in the video?
B3 hawk
@@ElkShape thank you
Does this mathews require a pic and tinny rail sight? I don't see the holes for mounting standard sights to the side?
Have never seen the rest string tied to the cable loop before, is that a better way versus the limb?
I think the only thing for me is how would the wear n tear on the rubber between the 2 limbs last . But other then that the bows is pretty sick . I'm still rocking my vertix 🤙🤙
I love my Gas Ghost strings!
My string on my V3X 29 hasn’t budged
I hear you guys talking about arrow weight a lot, what weight and for and all that stuff is good for white tail etc etc.
I would LOVE to bring your string man. As long as you don’t mind that I’m making the short commute from WV lol.
“They didn’t change anything” “Ok….then don’t get the bow”- realist statement made 😂 shoot what you like folks, it’s pretty simple. Got a sub from me 🤘🏼
Doesn’t that bracket on the sight cover up the sight tape on the landslyde?
Damn Dan - those Shadow Creek side plates are badass 🔥🔥🔥
Dan you should try the TRX 36 over the 34. I understand you have a short draw length but I think you’ll have more of a target bow experience with the 36. The TRX 34 is more of a kid’s target bow/ 3d/ hunting bow
Let the push to sell the newest year bows begin.
Got 2 questions price point and on the dove tail do you cut the remainder off or leave personal preference is why I ask
I wonder if that rubber will rot over time?
Limb driven failed on me twice… since then I’ve been using QAD, I served it through the down cable. Both are great rest, comes down to personal preference. Love da videos 🤙🏽🤙🏽
Where can I buy that bow strings? In that color in that Norton green how much on a Matthews phase 4 29’
also did you go with the 10 or 12 inch front stabilizer?
You boys have to get yiurselves to Australia.. You lot would love it, we don't have a very large hunting industry here, but we've got good hunting.. Water Buffalo, wild bulls, 6 types of deer, feral pigs and feral goats, hopefully you'll get to see it here before it's all gone or our laws get changed.. (the greenies are trying to get bowhunting made illegal)..
Anyway thanks again for all of your brain data, I rely on it to learn..
Cheers from Australia 👍
I think it’s awesome that you’re going to do a Vegas-style shoot. I look forward to that video. I always look forward to new video drops from y’all. Keep up the good work. Thanks for what y’all do
What is the trade-in program like for Mathews bows?
Shouldn't be much longer and we should be able to see what tour 2024 matthews set up was you went Elk hunting with 😂❤🎉
thoughts on someone who stuck with the v3 31 because the 31 is just a perfect sweet spot, 29 feels small and 33 is hard to get through the wisco swamps and brush.... really wanting the integrate /bridgelock/low pro goodies though...
Do you have the opportunity to shoot and test it?
Curious what ground blind that can contain MFJJ and his longer ATA bows. I haven't found a blind I can fit in and draw/shoot with my V3X 33.
How bout the barronett ox 5 its huge
another great video from Dan and crew. Pure authenticity. It will be interesting to see more testing. I'd like to hear more head-to-head Comparisions so those of us that have to buy will know whether it's worth the extra or not. especially in this market! Thanks Crew!
Noted!!
let me call yoi.. what's innovative or modernized tech in this bow? no adjustability in the cams? do you need cough drops or knee pads?
Dudes listen to your daddy MFJJ 😂😂😂😂😂😂 ❤the energy you guys have keep up all your hard work appreciate you all 👍🤘🤙👊
Damn I should have waited! Still love the v3x I’m shooting real good with that set up right now.
Rubber dry rots over time so have to wonder if Mathews did anything special to address this so the dampening material doesn't breakdown over time? Other than that concern, the bow looks solid. I've always been a fan of having my hunting bows be as quiet as possible.
We will report as we learn more
I wonder if you could fit the new limb system onto the v3x, can you boys do this??
You guys are awesome great content looking forward to stopping out in a couple days
Quick observation
On the landslide I don’t need the offset bracket in the bridge lock did you try sighting it in without offset bar to see your windage gain ?
I wonder how that rubber between the limbs will function at different temps on the extreme ends🤔
Please please please take me to Texas with y’all!!!!! I can easily drive to meet y’all
Do those new limbs affect speed at all? Not an engineer but seems like the rubber might slow it down.
Did you even watch the video😂
@@tannerharris1483 nope. Work got in the way of watching you toobz.
@@tannerharris1483 so it is slower, eh? Wonder if the strings on the V3X are exactly the same age and material...
How did you get that bow what website
I will admit that I really like shadow creeks side plates they’re a little thicker compared to the UV and Mathews side plates and it ergonomically superior in comparison
Awesome!
FYI, I have the Axcel Accutouch carbon pro with the larger head and I didn't need the offset bracket. The scope is pushed all the way in, but it's not necessary to get the bracket IME.
What release are you using, min 9.21?
The "commentary" during the build is hilarious!!
Thanks G
I have the Halon 6 but I feel the bow is too cramped, I can't seem to stretch out on it. 30" but I am 31.5 when I measured myself with the formula. May have to try it, no way in hell will I pay $269 for one stabilizer $200 for an adjustable v bar and $259 for the back stabilizer. I could pick up a used bare v3x 33 cheaper than stabilizer kit for the new bow which is crazy. But I would buy the bare bow though.
Bro calling me out like that hahah, you know all you gotta do is shoot me a text and I’ll build what ya want, as long as MFJJ unlocks the shop for me haha. I need to swing in and chat with him to see what all he needs but he knows I’d gladly help out, just been a chaotic last couple years with family stuff. And so you know I watch everyone brother, love your vids and what you have going on here man, keep it up!
Awesome!
What I don't get, if the new limbs decreased noise, then why didn't they decrease the weight of the bow and keep the noise the same as last year? They already lead in noise reduction. However, they are heavy bows. I like my Vertix but it is like holding a brick.
I caught the joke about the brown chicken brown cow.. some good ol 80’s bow chicka bow wow
Do a video comparison with your old stabilizers and compare
Does mathews send you the bows and stuff in the box for free or do you buy it at cost?
Dan shoots for Mathew’s - he doesn’t pay for bows (tc)
@@ElkShape that's pretty cool 😎
Please do tac in big sky, im headed there and was hoping to meet yall.
Why all the weights on the string
I think you need to test stabilizers to see which mount is quieter to see if it makes any difference. It might make a difference and might not make any.
I figure mathews probably did that testing before deciding to throw it on the new bow, Huh?
@weirdmood8102 always be tinkering my friend. If there is no noticeable difference would it be nice to save yourself some money that would buy you a half dozen more arrows or more?
@@BirchBarkOutdoors no doubt. I honestly don't see the new changes being very beneficial to me. I just bought a v3x 29 to start hunting with, So I highly doubt being so new to the game that I would be able to see any real difference in the two bows. I definitely think it's great if they got the bow quieter though, So that's great for whoever is going to be upgrading.
I literally just got my bow fully built last Saturday, So I just can't see spending another cent , after dropping 3k on this damn thing. 😄
I'm excited to start a new chapter with it though! Best of luck tobyou this season, Buddy.
Can jj please post a video of making the press use a impact?!?
I wonder why people leave the string building job. Sounds fun.
Same bow for the third year in a row, buy it if ya like it! If not there is a lot of other bows.
As always. Crazy Cool!!!! So hard not to upgrade every year!!!
Equipment is overrated everywhere - best example is the whole audiophile hobby.. they listen to equipment instead of listening to music and then wonder why they don't enjoy the immediacy of sound anymore (no passion, just reflection after reflection - addiction)...
Is that the Eberlestock Quiver?
MFJJ came on point with the mowhawk work,made the whole bow better. lol
Think Ill keep my Z7. I don't even want to shoot anything new because I don't even need a reason to buy a "backup" Matthews (Not that you need one).
1. Curious if the lawsuit against Hamskea will affect if epsilons are able to be sold after.
2. Still wondering why Vaportrail is not on the string list
1. Time will tell 2. They simply got a fraction of the feedback, amongst other boutique string makers, we'll be sticking with the top 3-4 based on feedback. -Dan
@@ElkShape Gotcha. Still love watching what you guys do. Keep providing knowledge to the community 👊🏼
@Josh Jones, I will legit cut/style my hair like yours and dye it any color you choose XD