I appreciate u sharing ur knowledge w us. Most guys with a dyno don't like to. Am glad FCI are including the correct hoses and adapters( and would be great if they included a longer hose for when A.I.S is removed ) if u can talk them into it. I'd pay more. Not havin to worry bout buyin extra plumbing to make it fit perfectly is a huge plus! Man, 6-7 hp from 4000-9000. with e-z bolt on!!
Thanks for all your videos man! Fci soon to replace the pro design i shouldn't have bought a couple years back lol I have no idea how you don't have 100k subs... great content man
Great video as always Daniel. It could be great if you can put an how to install video for the new fci uptated with box for the biginner like me lol Wish i can buy you a map for my upgrads .. dynoshop guys sucks in my hood lol
Wow!! That is definitely awesome!! You have great test results and I like to watch such even tho I don't have a Raptor! Lol if you lived closer I'd definitely like to see how much hp my z400 with the fuel customs intake and many other mods I have is making! Staying tuned!
Love your vids I have a 2020 Raptor 700r se big 3 hmf full exhaust k&N cone filter with open lid and pcv5 with this setup what stage of hotcams do you think would work best
Run Mobil 1 4T 10w40 engine oil. Cuervo recommends & specs top notch! Get fresh OEM plug. New, properly oiled Uni filter. Premium fuel only! Rossier Engineering exhaust tho may need tuning then get muffler only!
Can you help me real quick. Buying a 2021 Raptor for the dunes. Plan on only doing the Big 3. MAYBE a hot cam 3. With FCI Intake. Would you recommend the box or NO box
hi, i want to install "big three" on my raptor 2012... but i want to know if exist any kind of disadvantage on duratibily of the motor.. Normally i perform enduro and like cross country or GNCC racing. Im glad for the stock performance and torque but always is welcome and improve of this two. Thanks for you reply.
Hey man im installing and fci power commander 5 full dual barker hotcam 3, whats the best map for this? Please lmk thank you oh and also your +3 mm bore throttle body installed too..
Depends on the riding you do. If you do lots of thick mud or anything like with moisture, especially water crossings best to run a box. If you ride only in dry areas not necessary as the outterwear will protect it from dry dust and sand. However me personally with a expensive machine I protect at all cost and use a box, and I only ride sand.
Would this y adapter technic work to splice the throttle body and crankcase vent together then run the single line to the intake body? I am work kn 2011 700R and trying to install the fuel custom... Also, where can I get the correct size tubing to replace the OEM tube? Thanks!
To say you are the raptor guru would be an understatement, the time you put in to do damn near every type of build is appreciated!
fci intake truly makes the power you can instantly feel how much more power you have 100% reccomend it cuervo is the man
6 horsepower for an intake is nuts, most people dont even realize how much value that is for an ATV
I appreciate u sharing ur knowledge w us. Most guys with a dyno don't like to. Am glad FCI are including the correct hoses and adapters( and would be great if they included a longer hose for when A.I.S is removed ) if u can talk them into it. I'd pay more. Not havin to worry bout buyin extra plumbing to make it fit perfectly is a huge plus! Man, 6-7 hp from 4000-9000. with e-z bolt on!!
yes, it has all been sorted out with the updated kit.
Thanks for all your videos man! Fci soon to replace the pro design i shouldn't have bought a couple years back lol I have no idea how you don't have 100k subs... great content man
I did the same mistake 🤦♂️
Garret does a good job he dynoed my quad and did an amazing job fuel customes is dope af
Hi, your vids are very infomative, the fci intake on a 06-14 head do a similar gain?
Thanks, and continue vids like that!
Awesome videos! Will i have to do a fuel controller if i add this with removing the spark arrestor because it would be too lean?
Need answers
Great video as always Daniel. It could be great if you can put an how to install video for the new fci uptated with box for the biginner like me lol
Wish i can buy you a map for my upgrads .. dynoshop guys sucks in my hood lol
Wow!! That is definitely awesome!! You have great test results and I like to watch such even tho I don't have a Raptor! Lol if you lived closer I'd definitely like to see how much hp my z400 with the fuel customs intake and many other mods I have is making! Staying tuned!
Love your vids I have a 2020 Raptor 700r se big 3 hmf full exhaust k&N cone filter with open lid and pcv5 with this setup what stage of hotcams do you think would work best
If riding in the sand dunes would you recommend keeping the intake box or would it be fine the way u have the intake now
You only need the box of rain mud. Sand you need the outer wear over the filter for fine sand dust that could get through the filter
Awesome! I have an 06 that needs more go
Run Mobil 1 4T 10w40 engine oil. Cuervo recommends & specs top notch! Get fresh OEM plug. New, properly oiled Uni filter. Premium fuel only! Rossier Engineering exhaust tho may need tuning then get muffler only!
I wonder what's the difference between this upgrade and just removing the air intake lid
So you can really run this without any power commander
Have you done a dyno run with 700 raptor with a vortex ecu
Can you help me real quick. Buying a 2021 Raptor for the dunes. Plan on only doing the Big 3. MAYBE a hot cam 3.
With FCI Intake. Would you recommend the box or NO box
The crankcase breather hoose and the Throttle Body hoose can be connected with the "Y" adaptor or it need to be in separated hoose lines? thank you.
hi, i want to install "big three" on my raptor 2012... but i want to know if exist any kind of disadvantage on duratibily of the motor.. Normally i perform enduro and like cross country or GNCC racing. Im glad for the stock performance and torque but always is welcome and improve of this two. Thanks for you reply.
Does your AIS block off plate come with a plug to plug the electronic valve connection?
So no fuel programmer is needed for this. I thought it was. I have an 06 stock but the baffle is out of the stock muffler. Would I need it then.
I have a big 4 raptor. The fci has the box around it. Will I need a retune if I remove the box?
Hey man im installing and fci power commander 5 full dual barker hotcam 3, whats the best map for this? Please lmk thank you oh and also your +3 mm bore throttle body installed too..
I got a raptor 700r I want to upgrade to this fuel Intake but is easy or difficult to install?
So it will run good with no tune, stock exhaust?
Hey are the AIS block off plates the same for a 700 raptor and a YFZ 450R or are they different ?
Was looking at um I noticed they come with an air box as well, do you recommend running it with or without the air box ?
Depends on the riding you do.
If you do lots of thick mud or anything like with moisture, especially water crossings best to run a box. If you ride only in dry areas not necessary as the outterwear will protect it from dry dust and sand. However me personally with a expensive machine I protect at all cost and use a box, and I only ride sand.
so do i want this with the box or without?
Any plans for a cam swap dyno video on this 2020 bike?
yes, as we progress. we will . next is testing different exhaust systems./
@@MrCuervoRacingloving this video series. Thanks for making it for the raptor community.
@MrCuervoRacing what do you recommend, monster intake or fci for better performance?
FCI is the best performer, hit us up we have them,
@@MrCuervoRacing Do you have a website or can i call in orders?
@@MoparCrazy803 phone or email.
can you do Fci with kn style vs foam compare
I would like to see that also
My 08 has a different lid and a k&n cone filter. Would an upgrade to the FCI be a noticeable gain?
Mild seat of the pants feel but yeah
@@MrCuervoRacing fueling adjustments needed to go from my setup to that FCI?
Would this y adapter technic work to splice the throttle body and crankcase vent together then run the single line to the intake body? I am work kn 2011 700R and trying to install the fuel custom... Also, where can I get the correct size tubing to replace the OEM tube? Thanks!
you do not want to run the crankcase vent on the same line as the high speed idle control as oil vapor may clog the valve