Amazing 230VAC LED Strip ⚡️🔌
Вставка
- Опубліковано 7 вер 2024
- Take the hassle out of LED strip installation with Robus Atlantic! Need an epic 50-meter run? No problem. This LED strip is a dream to install with just one direct-to-mains power supply connection. Get ready to go big on your next lighting project.
== AD========================================
Robus Atlantic LED Strip
👉 hub.efixx.co.uk...
=============================================
#ledstriplights #ledlighting
![[STEP BY STEP] How to install LED TAPE in a SIMPLE way!](http://i.ytimg.com/vi/Sfv44bN1U98/mqdefault.jpg)
![[STEP BY STEP] How to install LED TAPE in a SIMPLE way!](/img/tr.png)
=AD= Robus Atlantic LED Strip
👉 hub.efixx.co.uk/robus-atlantic
Bhai hamko chyai
Hmmm prefer 12 or 24V strip, safer!
Thats all nice and good until you have a lot of strips and/or long cable runs
Safer? the currents used in my 12V LED setups are getting silly. 2430VAC with RCBO is much less of a fire risk.
the 12V systems are horrendously inefficient too, not just voltage drop but the resistor droppers for each 3 LEDs just burning off electricity to heat. with 240V you can use proper driver circuits for efficiency (no idea what the efficiency of this particular set is though)
@@sm1thersdude where the hell do you live that 2.4kV is the mains voltage 😂
@@LoganT547 He meant to say 240v ac. 😂
Would NEVER use 230 volt flimsy things in a house. Low voltage in a kitchen with water is the only way to go.
That's a very good point. I had a valve burst on a washer in the middle of the night. Hot water spraying everywhere. I tried to investigate a little further only to find out that the water was high enough that the deep freeze had energized the water in the ground. That 110v woke me up real quick. I noped my a$$ to the curb, shut the water off at the main and went straight to the breaker and shut off the utility room power.
There's just no reason not to use 24v. It's just so much safer. Someone mentioned that you need to do it in order to do longer runs of light, but IMO, you can just use multiple power supplies if need be.
See your using the Clive quick test there 😆
Amaizing! Now I can't use a MOSFET to control my led strips! I need a stupid relay
My first thought was hope they clearly mark it 230v before some numpty chops it live 👍😬
Not that I have ever chopped a live, err, dead cable...
Ahhhhh neither have I, of course the blackened area on the tip of my nappers is just from cutting the tip of a black permanent marker😅😂
Somehow didn't do it myself but people working next to me did that enough.
230v so then it’s on a two pole what 30 amp breaker
@@Weasel_NM575I suppose you’d feed it in swa saying something like that 😅
Hang on, didn't you just do a heat shrink video where the more it shrinks the less it does something else?
Or have I got that wrong?
In one video thwy say its good. In other they dont. Depends on who pays for video
They told, the more it shrinks, the less flexible as the original wall thickness is multiplied by the shrinked ratio. There is nothing wrong with that. Different versions for different applications.
@@gabor.nadudvari thanks for clearing that up, I suppose it helps with the mechanical fixing at the plug ends yes?
@@pawenozynski1038 Yupp... the curse of UA-cam videos.
Who pays the most gets that days endorsement! So, so transparent now it's getting to be beyond a joke! 🙄
Does it even have any smoothing on the rectified output or does it have a terrible 50Hz flicker?
Very professional!
Personally I'm wait for the 10,000V variants to come out. 220/230V is for noobs.
there's some other strips that not allowed to be cut
Quick test there well good
Selling a mains voltage lighting product with that connects directly to the normal mains supply without an intervening type tested and third party approved device is a whole different bag of public liability you might want to check.
It meets the required lighting standards - see link!
Im from the states and my wife bought a vanity mirror w lights, well its from the UK and i was wondering what wires is what it has 3, blue, green w yellow stripes and another color i can’t remember! Which is hot/neutral/ground
Green/yellow is earth/ground
Blue is neutral
The other wire should be red or brown - that's live/hot
@@TheLegocar awesome thank you
I’m amazed
Mam w łazience, ale światło mnie denerwuje. Widzę to delikatne pulsowanie 50Hz
What kind of glue? I'm using super glue but it won't sticking😞
ｄｏ ｙｏｕ ｎｅｅｄ ｌｅｄ
ｓｔｒｉｐｓ？ｗｅ ｈａｖｅ ｏｕｒ
ｏｗｎ ｆａｃｔｏｒｙ
❤ très cool
Prefer 12v. Can use it on the boat.
Am I missing something? What differs it from stuff that's on retail for like 3 years already?
50 meters from one connection
Probably longer than three years 😅
Nothing other than this company paid them to make a video about this one.
@@efixx that's exactly the same as ones sold here - 50m roll comes with adapter, some plugs, some clips.
@@andycrask3531 not sure, been avoiding (rectified!) mains voltage outdoor lighting that unqualified people have access to.
Wow many waat strip light
Is it dimmable?
I guess you could maybe use phase angle control. but thats really just a guess
What's the cutting division? Oh, and the flicker, especially if try to dim it...
What kind of glue you use?
It looks like a bottle of cyanoacrylate to me, AKA super glue.
Not to long ago Joe did a garden lighting video where he put down mains voltage lighting over the use instead of 12/24v products.
Guess it's just down to who's "sponsoring" [I.e. paying] for any one particular videos content!
Give it a month or two and they will be dissing this product too🙄
Cutter name?
I m electrician led light
Bout time some one did this and that cheap Chinese c__p , do they do dimming units for it to?
LV LEDs ?
No Thanks Very Dangerous !
ELV or SELV is my limit for LEDs.
جميل good 👍
Kansa gum haii batao zara
That stuff is nasty to use , to say how anal the uk is on wiring yet all the connections relay on is you shoving two metal spikes into a load of copper wire and hoping you get a connection, can’t wait for led strip to go out of fashion it’s fucking shite 😂
What would you think it should replace the LED strips. If you ask me, it is getting wild.
😮
g
❤ très cool