How to Replace Headlight Assemblies 2013-2016 Dodge Dart
Вставка
- Опубліковано 14 жов 2024
- Buy Now!
New Headlight Set from 1AAuto.com 1aau.to/ia/1ALH...
This video shows you how to install new, quality, TRQ headlight assemblies on your 2013-2016 Dodge Dart. Over time, headlight lenses become dull and hazy. You'd be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle.
This repair was done on a 2014 Dodge Dart GT 2.4L Sedan 4-Door FWD Manual and the process should be similar on the following vehicles:
2013 Dodge Dart
2014 Dodge Dart
2015 Dodge Dart
2016 Dodge Dart
Tools you will need:
• Phillips Head Screwdriver 1aau.to/obBk/1A...
• 10mm Socket 1aau.to/obyU/1A...
• 7mm Socket 1aau.to/obyU/1A...
• 8mm Socket 1aau.to/obyU/1A...
• Trim Tool Set 1aau.to/oark/1A...
• Ratchet 1aau.to/obYP/1A...
• Gloves 1aau.to/oaNm/1A...
• Painter's Tape
• Safety Glasses
• Tire Pressure Gauge
• Measuring Tape
• Pick 1aau.to/oX7/1AX...
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Fortunately for me I got rid of the splash shield after doing a few things to my car lol it was such a pain in the rear and the previous owner definitely ran over a few curbs because the thing looked terrible but I recommend removing it if you're like me and change your own oil/coolant and do work on your car, plus it looks nicer
Meanwhile….27 screws, nuts and bolts later just to change a tiny bulb….
Had to do this at work. Lost the bulb in the housing. Make sure to pull the wire out and plug in the new bulb or else it can fall into an abyss. Overall not hard just don’t drop the bulb!
Mine are good enough…. Wow. I can barely top up washer fluid.
Hi! Plis !! Where is headlight adjuster???
Are you frigging kidding me???
this is insane but i’m just a girl so thanks🙏🏼
i hate new cars