How to Remove The Front Bumper 2017-19 Nissan Rogue
Вставка
- Опубліковано 5 лип 2019
- Hey everyone this is just a quick tutorial on how To Remove The Front Bumper on a 2017 Nissan Rogue and thank you all in advance for watching. Be sure to To like and subscribe to the channel for future content!
Follow me on instagram at / countryboymodz
#Bumperremoval #2017NissanRogue #CountryBoyModz - Авто та транспорт
This is so helpful. I need to replace a few broken clips in the bumper and this is making it where I don’t need to take it in to do so.
Exactly what was needing to see. Thank you.
Nathan Gee you’re welcome and I’m glad I was able to help
Thanks for the video! My wife hit a deer in her Rogue and I need to remove part of the bumper to fix it. This video will help alot! Thanks for taking the time to share.
+Jason Joines you’re welcome and that’s why I make these videos to find a way to help everyone along with sharing what I learned about this vehicle
Useful video. It also works for the 2014 Rogue. I used it to replace the headlights assembly. Thanks.
MazingerZ1022 I’m glad I was able to help some way and thanks for the information.
I could never do this lol keep up the good content 🙌🏼
Chris & Marcy you can it was my first time doing it never doubt yourself
This is what im waiting for bro! Thumbs up!
UnboxMe Zales I think it’s the only and first video how to do it on UA-cam
Great content bro....keep it up👍👍
VERY helpful video! I have a 2015 but have to believe it is very similar.
Thanks it’s Pretty much the same method besides the grill part just a little different
Thanks for sharing!👍🏻👍🏻
Ismaels 8401 you’re welcome
Cool video
You’re video is really helpful. Did you know if I have to take of the bumper to change the headlight assembly for rogue 2017? I’ll really appreciate if you can answer my question.
Yes you will have to from what I seen on mine just remember to mark where you last dismounted them at so your lights could be adjusted right
Thanks man! 💪
You’re welcome
useful video Thanks for sharing
You’re welcome I will do a rear bumper soon
I will leave that to the professionals like you😀
Kern-N-Zane lol just gotta take some chances sometimes
Can you help me do the same for a 2017 pathfinder sv?
Jon Calizan I’m pretty sure that the process is the same but as for the bolts holding each side, they should be located in the inner fender well
I have that same screwdriver set. Got it 20 years ago.
Is it possible to replace front chrome molding at the bottom without removing the whole bumper? Thank you
Yes it it is it’s pretty much a pry off with the right tools
@@TheRealCountryBoyModz I don’t think you can just pry off it has some bolts and nuts
Do you need to remove the entire fender flare to take off the bumper? It looks like you may be able to remove the front tabs to get to the screw under it holding the bumper. Or is there more to it I am just not seeing here?
have a 2016 Rogue and need to replace one of the light units and I never thought I had to remove the bumper :(
Tig3rj I would remove the entire fender flare just for safety precautions but you could undo a few tabs just to get to the actual screw. However, to be safe it’s easier just to remove it to keep you from buying other pieces that you did not need.
Thank You very much!! :)
Tig3rj you’re welcome
You don’t need to remove the entire fender flare to remove front bumper.
Not sure you’ll see this, I have a 2019 Rogue that the Lower Grill Molding Bumper Finisher Rogue 62278-5HK0A sits just above the license plate holder. Can you remove that by removing the grille then remove that piece?
Many thanks
New follower!
If I’m not mistaken you should be able to take it off when you remove the grill. It’s been a while but I think you can.. if any questions I have a how to remove the grill video as well. Thanks for the sub too!!
my man, thanks for the nice video, my problem is that I cant remove the wheels cover, that black plastic with tabs. cant pull it out. pls help and thank you.
Fernando Cruz are you talking about the actual wheel cover for the rims or the black fender flare above the wheel?
@@TheRealCountryBoyModz thanks for the quick response. Yes the black plastic fender cover.
@@TheRealCountryBoyModz I removed all of the screws but I can't pull the fender cover off. Thanks
@
@@TheRealCountryBoyModz thanks for the reply, yes the black fender flare above the wheel, i removed all of its screws but im scared to pull the fender cover with force for I might break it.
I like this suv
GM Vid thanks me too
Some words I couldn’t hear properly and understand but I get the point.... so so.
Would I have to buy new clips, or would they just pop out it the fender
They come out with the fender as long as you are careful
@@TheRealCountryBoyModz Wasn't expecting such a quick response from a two year old video, Thank You
@@Nameless-ki3wf try my best to respond back to most comments the best I can and you are welcome
@@TheRealCountryBoyModz I bumped my friends truck that had a hitch on it and dented right under the driver's side headlight,
@@Nameless-ki3wf ouch tough one at least this video will help to remove it
What about the front cam is that on the bumper?
If you are talking about 360 camera set up it usually be located under the Nissan emblem but sometimes can be on the grill but the front emergency camera is located in that triangle area on the windshield in the center and the radar is located behind the emblem on the grill (non attached)
No just the front-facing camera is there a clip I disconnect and it comes off with the bumper right I need to just replace my drivers side light because of water in the lamp
@@DOA-SPACELY yes you should be able to just disconnect it and it will come right off
🤘🤘
+Devinity Reign 🤘🏿🤘🏿thanks
How do you take out the fog lock nock outside in front bumper
Are you talking about the plate where the fog light go
@@TheRealCountryBoyModz yes thanks
hiatt tim once you take off the bumper look inside there should be some press in clips in that area holding that cover in and you should be able to remove that to install your fog lights into it if I’m not mistaken.
@@TheRealCountryBoyModz thank you
hiatt tim you’re welcome
How do you remove just the headlight unit?
TZ- Funny Compilations it should be two bolts at the bottom of it and in the far back corner I will be doing a video soon on it hopefully I can help you. Meanwhile look on Facebook and join the group Nissan Rogue Nation/ your question probably could be answered there for sure
@@TheRealCountryBoyModz thank you, I'll be looking forward to the video cause I'm more visual. :)
13/32 socket ? Its 10mm
C List yes it’s a 10mm socket (10.39mm exact) in metric but in inch it is a 13/32 socket which equals to (0.46in).... hope this explain it better for you some