Great video, our 2017 Rouge got a small hit on the back drivers side. I got a few estimates ranging from $800-$1000 from body shops. After watching your video, I went out and pulled the driver side corner of the bumper off, figured out What was damaged and ordered the white clip part behind it and fixed it myself for under $100. Your video was spot on and VERY helpful! Thank You!
You seem to be a real guru and a very careful on what you're doing. I wish you'd let me if are somewhere close to me and, maybe you will be willing to fix my bumper which is on the exact bad-shape as the one seen on your video. Great job, Mr. Expert!
Thank you! Someone hit my bumper and shattered one of the reflectors. The replacement part was easy enough to find, but without this video I would’ve had no idea how to install it. I followed your instructions and had the job done in an hour.
Great Video! Just fixed mine, although the 2021 version has an extra screw that caused me a bit of a trouble, could manage anyway for what I needed. Thanks a lot!
Thanks for the video. I have to replace that chrome trim at the bottom on mine. I'm going to try to attempt it without removing the bumper. Looks like I may be able to squeeze my arms underneath through the back of the bumper.
I’m not sure you could get in behind. Maybe possible by pulling one side off and letting it hang but you must be careful not to damage the cover in the process.
So I just took my bumper off all the screws and all but there is wiring that’s connected from the car to the underside of the bumper … you didn’t give info on that … ? Does anyone know about the wiring ?
@@mcycleshawnit’s prob back up sensors ! luckily that electrical panel was held down by two plastic clips and 3 metal clips that easily removed by hand and fork tool . I just unclipped and transferred to the replacement bumper . It was easy phew . For anyone wondering it’s a removal electrical panel .
Make sure you have the bolts removed (1 on either side) in by the hatch area. Then if the sides are free and all fasteners are out from underneath you should be able to pull straight back without it breaking….let me know if you still have a problem
I like to let them be whenever I can. If you must remove them, they are typically held into the bumper on the back side by some clips. Sometimes you can also unhook the whole strand from the wiring harness and remove the bumper cover
Life saver - just backed into the wife's car. your vid helped me to press the dimple out b4 I got in too much trouble. Thanx!
Good news! That’s why I’m here😅
That electronic box in the corner at the end of the video is the Blind Spot Detection System Warning Sensor SRR3-B
Great video, our 2017 Rouge got a small hit on the back drivers side. I got a few estimates ranging from $800-$1000 from body shops. After watching your video, I went out and pulled the driver side corner of the bumper off, figured out What was damaged and ordered the white clip part behind it and fixed it myself for under $100. Your video was spot on and VERY helpful! Thank You!
That is fantastic!! So happy you beat the “system”!
You seem to be a real guru and a very careful on what you're doing. I wish you'd let me if are somewhere close to me and, maybe you will be willing to fix my bumper which is on the exact bad-shape as the one seen on your video. Great job, Mr. Expert!
Would please fix the bumper on my Nissan Rouge?
Thank you! Someone hit my bumper and shattered one of the reflectors. The replacement part was easy enough to find, but without this video I would’ve had no idea how to install it. I followed your instructions and had the job done in an hour.
Thanks for your feedback! I’m very happy I could help!
Feel free to subscribe to help me out. Even if you don’t hit the bell😉
Nice man, thanks for the vid. Good info, I don’t actually need to take it off to see what is in there.
Great point! Thanks for the feedback!
Excellent detailed instructions. Thanks for posting !!
I appreciate the feedback my friend!
Thanks for sharing such a useful videos! Good Work 👍.
Very informative. Thanks brother!
Just curious is this "vent"/"grill" in the middle of the bumper is just decoration?
Yes. It doesn’t do anything noticeable. Maybe cooling for the sensors🤷🏻♂️ sometimes there is a sensor in the center to open the hatch.
Great Video!
Just fixed mine, although the 2021 version has an extra screw that caused me a bit of a trouble, could manage anyway for what I needed.
Thanks a lot!
Happy you have an idea of what to look for!
Thanks for the video. I have to replace that chrome trim at the bottom on mine. I'm going to try to attempt it without removing the bumper. Looks like I may be able to squeeze my arms underneath through the back of the bumper.
You should be able to get back in there
any way to replace the rear chrome trim without removing the bumper?
I’m not sure you could get in behind. Maybe possible by pulling one side off and letting it hang but you must be careful not to damage the cover in the process.
So I just took my bumper off all the screws and all but there is wiring that’s connected from the car to the underside of the bumper … you didn’t give info on that … ? Does anyone know about the wiring ?
@@somecrazycat92 wiring is probably all your sensors for collision monitoring system
Or back up sensors depending on model and options
@@mcycleshawnit’s prob back up sensors ! luckily that electrical panel was held down by two plastic clips and 3 metal clips that easily removed by hand and fork tool . I just unclipped and transferred to the replacement bumper . It was easy phew . For anyone wondering it’s a removal electrical panel .
Great good information I do it this weekend i need replace that little trim 😀 👍
I'm still trying to pull it off the last "clip/slip"... I'm pulling it directly back any tips???
Make sure you have the bolts removed (1 on either side) in by the hatch area. Then if the sides are free and all fasteners are out from underneath you should be able to pull straight back without it breaking….let me know if you still have a problem
It help me a lot … thank you
Then if you have anymore movie for this rouge pls post them ..
ThNk you for the knowledge, appreciate it.
I have the same exact problem on my bumper on the same side
Can u do a video for the parking sensors
What do you need to do with them? I don’t have this vehicle any longer
Hey Bro, do you have the part number for the bumper reflectors screws? Thank you
I’ll see if I can look it up but I’m the meantime just call a Nissan parts department. They can get you that info. Cheers!
Appreciate it
What kind of screwdriver is that?
Looks like I used craftsman flat head. Also a small ratcheting screw driver that uses different type bits like a drill.
Do you have an install video? It would be super helpful!
I do not at this time but I could walk you through it. Basically a reverse of removal.
@@mcycleshawn thanks
Thanks for the advice
Thanks for the video.
What about parking sensors?
I like to let them be whenever I can. If you must remove them, they are typically held into the bumper on the back side by some clips. Sometimes you can also unhook the whole strand from the wiring harness and remove the bumper cover
Great thanks a lot for UL!! 😎👍🍻
thank you for your help
Amazing Vid
@@AeroPR thank you for the feedback!
Pup it, pup it and pup it. 😂
There is no horn under the rear bumper.
Corrrect
Plastic. Everything is plastic.
I recently purchased a salvage Nissan Rogue SL 2018, without the bumper.but where I can find the foot sensor /cable liftgate?
I work on these for dealers. I would look on eBay or at salvage yard. Hope you can find a good one. Hate to pay dealer prices