its the first time I saw a UA-cam Project on a BMW Z3. You did A good job man I just watched 16 videos in 3 days. Loved that serie of videos. Very good quality and you help me a lot I wanna wrap my car in maybe 1 year so I start to look on UA-cam to get some information, you saved me a lot of time ! very cool dude keep it up !
Good recap! Inozetek has been well known to be difficult to apply and apply well. I have it on one of my cars done by an experienced shop and it's a pretty darn good result but after some time, similar to you, the film wants to come up from tucked areas because it just wants to be flat. The microscratching on it drives me a bit nuts too... At the end of the day good learning experiences and just have fun with things!
Yessir!! I still believe it was due to me not post heating properly or enough on those crevices where I tucked the material into. In theory, it should lose its memory if I were to post heat it to a high enough temperature without burning the material, but I do agree with the micro scratching! haha
@@thoas_ yeah it certainly seems to have a better memory than I do by a long shot even when set ablaze...but like most people really like the outcome and generally think its painted! Good enough.
The muffler tips were from a generic catalogue at a muffler shop. Nothing too special. I just chose one that closely resembled the DTM exhaust tips haha
@@thoas_ nice! I appreciate that. I just started my project. Swapping out the s52 for an s62 and the getrag 6 speed trans. Need to mock up some designs for the exhaust. I was thinking of doing side skirt outlets like the g wagon but unsure of ground clearance. I really like your set up.
Thank you!! It takes time. Once you get the general idea of where you want to head and figure out the route best suited for your situation, just FULL SEND IT BROTHER. I followed quite a few other people who had the same car as me for inspiration and I eventually just decided to full send it once I figured out what I wanted!
That's a great question, I don't recall if it was there when I got the car, but when I tried to check to see if I can clear it, there were like 3 other codes that was causing the airbag light to come on, so I'd need to sort out all those codes in the future LOL
A kind request i hope to be fulfilled! Pls post a video of the complete build so I can get some inspiration to build mine! Hope you will post one soon.
Dude! I just watched all of your project videos. Way to go!!! Such a satisfaction listening to young man not saying word “like” every 2 seconds😂. And thank you for not playing ghetto music on the background. You give me confidence to start working on my s*it box. Be safe;)
The link in the description of the video links to the midwing, you have the option to order one with or without the cutout. However, the quality of their parts isn't the best and I'd probably just message this guy named Cemal who reproduces parts for the Z3 M Coupe. Purchasing through him will probably be sketchy, but I and many others can vouch for his credibility along with the quality of his parts when it comes to fitment. instagram.com/tripfcr/ facebook.com/cemal.akcal
love the view of the rear of that coupe
It’s the best part!!
@@thoas_ few cars where the back looks better than the front
its the first time I saw a UA-cam Project on a BMW Z3. You did A good job man I just watched 16 videos in 3 days. Loved that serie of videos. Very good quality and you help me a lot I wanna wrap my car in maybe 1 year so I start to look on UA-cam to get some information, you saved me a lot of time ! very cool dude keep it up !
Thank you!! Wishing you the best of luck when you decide to start wrapping man :)
Not the “seam-innnnn”😭😭😭🤣🤣 great video bro! Keep up the solid work. Khaki green clown shoe ftw😎🤝🏽
Also, the wrap job looks frickin insane😳👌🏽 nice ass diy
Yours alike brother!! I appreciate you 🫶💚🥹
Best opening. The M coupe sideways in your garage when the door went up…….oh man.
Good recap! Inozetek has been well known to be difficult to apply and apply well. I have it on one of my cars done by an experienced shop and it's a pretty darn good result but after some time, similar to you, the film wants to come up from tucked areas because it just wants to be flat. The microscratching on it drives me a bit nuts too...
At the end of the day good learning experiences and just have fun with things!
Yessir!! I still believe it was due to me not post heating properly or enough on those crevices where I tucked the material into. In theory, it should lose its memory if I were to post heat it to a high enough temperature without burning the material, but I do agree with the micro scratching! haha
@@thoas_ yeah it certainly seems to have a better memory than I do by a long shot even when set ablaze...but like most people really like the outcome and generally think its painted! Good enough.
Really like those muffler tips. Would you mind sharing more info on those?
The muffler tips were from a generic catalogue at a muffler shop. Nothing too special. I just chose one that closely resembled the DTM exhaust tips haha
@@thoas_ nice! I appreciate that. I just started my project. Swapping out the s52 for an s62 and the getrag 6 speed trans. Need to mock up some designs for the exhaust. I was thinking of doing side skirt outlets like the g wagon but unsure of ground clearance. I really like your set up.
bro i wish i had the vision u have for ur car, like im not sure what route to take for my z4, love the build.
Thank you!! It takes time. Once you get the general idea of where you want to head and figure out the route best suited for your situation, just FULL SEND IT BROTHER. I followed quite a few other people who had the same car as me for inspiration and I eventually just decided to full send it once I figured out what I wanted!
Just found your channel. car is wild
Thank you, it is only the beginning!! haha
Great video. Looks sooooo good.
Did you have an airbag light come on due to the aftermarket steering wheel?
That's a great question, I don't recall if it was there when I got the car, but when I tried to check to see if I can clear it, there were like 3 other codes that was causing the airbag light to come on, so I'd need to sort out all those codes in the future LOL
A kind request i hope to be fulfilled! Pls post a video of the complete build so I can get some inspiration to build mine! Hope you will post one soon.
Gotchu! I'll do a full breakdown of everything that has been done to it so far for the next video! :)
Dude! I just watched all of your project videos. Way to go!!! Such a satisfaction listening to young man not saying word “like” every 2 seconds😂. And thank you for not playing ghetto music on the background. You give me confidence to start working on my s*it box. Be safe;)
Thank you man! :)
You should take this to LA’s bimmer invasion next year
I need the details! I've been living under a rock ever since this project started 😂
Im having trouble finding a mid wing with a wiper blad cutout. Can he point me in there right direction?
The link in the description of the video links to the midwing, you have the option to order one with or without the cutout.
However, the quality of their parts isn't the best and I'd probably just message this guy named Cemal who reproduces parts for the Z3 M Coupe. Purchasing through him will probably be sketchy, but I and many others can vouch for his credibility along with the quality of his parts when it comes to fitment.
instagram.com/tripfcr/
facebook.com/cemal.akcal
This thing is HAWT
Thank you father 🫶
Love it
MORE VIDEOS
Soon... 🥹
Yeah yeah whatever what car are we ripping apart next huh
YOUR S13
@@thoas_ man not again im not due for that for at LEAST a couple years