So it's Fields bro hey use a code reader and look up the code. Your truck might be in ether protection mode witch the computer is keeping you from starting it witch will further damage the engine. Or it could be a short in your relay fuse box under the hood. Ether way get a code reader you can run down to AutoZone and get one for like 100 bucks. Another thing to try is reset the code look up online how to manually clear the code. That's my advice buddy. Good luck Lcpl Fields USMC commander of 1st fssg Lcpl Underground.
Ladies and gentlemen I could not emphasize enough as I contacted GM and the Executive Resolution team at Chevrolet . THIS IS A RECALL ISSUE, but in reality they don’t care. Searching on line you will find that there are thousands for customers with this problem, and yet again Chevy executive team tells me - We are not interested on looking into customers complaints on line. Customers doing this game of constant reset and tricks to get their vehicles started is not the answers. My local mechanics and after constant research to solve this Pass Lock problem lead to taking my 2011 Colorado to Chevrolet in order to find a solution and after contacting Chevrolet Executive Resolution department I was told that my vehicle was being placed as a high priority to solve this problem. Well the first two days at the dealership they had no clue. A few days later I was told that the vehicle needed ignition cylinder, ignition lock housing and keys replaced. After 5 days I was told that a part defective from stock had to be reordered. Well, we are now on one week and three days and no vehicle in sight. Mind you this is at a cost of over $900.00. I realized now why the first owner got rid of the vehicle when it was sold to me by SawgrassFord as a pre-owned vehicle with this intermittent problem. By the way Chevrolet will not take responsibility to declare this issue as a recall- don’t bother. I’m sorry for the rest of you Colorado owners or other Chevy customers that are dealing with this problem. Next time I’m getting a Toyota Tacoma. Oh and if you ever need a starter changed, good luck because the manufacturer buried that unit which requires the intake manifold to be removed 😱. My best to all of you Chevy fans.
I have a 2006 chevy Colorado 81000 miles, it won't start. I have to wait 10 to 15 mins to start and it start right away. Engine light is on, I have change battery and starter it fix the problem for a few months than the problem came back. The next thing I did was clean the whole air intake valve and the sensor. it's has been months now and I haven't had a problem . I'm hoping that it stay this way.
Ours won't turn on at all, brother in law forgot to turn alarm off before turning on, sounded like it was going to start then stopped, lights work fine radio too but seems locked alarm wont beep either but light comes on the alarm button when you push it
Try cleaning off any/all corrosion on the battery terminal and connector?
So it's Fields bro hey use a code reader and look up the code. Your truck might be in ether protection mode witch the computer is keeping you from starting it witch will further damage the engine. Or it could be a short in your relay fuse box under the hood. Ether way get a code reader you can run down to AutoZone and get one for like 100 bucks. Another thing to try is reset the code look up online how to manually clear the code. That's my advice buddy. Good luck
Lcpl Fields USMC commander of 1st fssg Lcpl Underground.
Adam Fields thanks bro. Did all that nothing. Its not the pass lock. so other choice is the starter.
Ladies and gentlemen I could not emphasize enough as I contacted GM and the Executive Resolution team at Chevrolet . THIS IS A RECALL ISSUE, but in reality they don’t care. Searching on line you will find that there are thousands for customers with this problem, and yet again Chevy executive team tells me - We are not interested on looking into customers complaints on line. Customers doing this game of constant reset and tricks to get their vehicles started is not the answers. My local mechanics and after constant research to solve this Pass Lock problem lead to taking my 2011 Colorado to Chevrolet in order to find a solution and after contacting Chevrolet Executive Resolution department I was told that my vehicle was being placed as a high priority to solve this problem. Well the first two days at the dealership they had no clue. A few days later I was told that the vehicle needed ignition cylinder, ignition lock housing and keys replaced. After 5 days I was told that a part defective from stock had to be reordered. Well, we are now on one week and three days and no vehicle in sight. Mind you this is at a cost of over $900.00. I realized now why the first owner got rid of the vehicle when it was sold to me by SawgrassFord as a pre-owned vehicle with this intermittent problem. By the way Chevrolet will not take responsibility to declare this issue as a recall- don’t bother. I’m sorry for the rest of you Colorado owners or other Chevy customers that are dealing with this problem. Next time I’m getting a Toyota Tacoma. Oh and if you ever need a starter changed, good luck because the manufacturer buried that unit which requires the intake manifold to be removed 😱. My best to all of you Chevy fans.
It gets worst. With the newer models cause now there are more wiring to problem solve
I have a 2006 chevy Colorado 81000 miles, it won't start. I have to wait 10 to 15 mins to start and it start right away. Engine light is on, I have change battery and starter it fix the problem for a few months than the problem came back. The next thing I did was clean the whole air intake valve and the sensor. it's has been months now and I haven't had a problem . I'm hoping that it stay this way.
+Tai Weleilakeba I just took it to the dealer ship. Fixed no problems ever since.
@@echo1er what was the issue?
Julia Ramirez The dealership said it was a sensor and couple fuses. I hit a big pot hole and it f up the truck. Are you having the same problems too?
Yes, but reads abs error then brakes then fault.
Ours won't turn on at all, brother in law forgot to turn alarm off before turning on, sounded like it was going to start then stopped, lights work fine radio too but seems locked alarm wont beep either but light comes on the alarm button when you push it
Can you hear the starter engage? Any kind of clicking or anything like that?
If you look at :23_25 you don't even hear a click just the dash board lights restating
M
I have a 2005 Colorado and my starter went out. No sound, clicking or nothing. Just dash lights