Розмір відео: 1280 X 720853 X 480640 X 360
Показувати елементи керування програвачем
Автоматичне відтворення
Автоповтор
I came to lean about varistor. Now I understand. Thanks for sharing this👍.
@@SkySky-zr3bt I am very happy it helpful 😊
Thanks... Well explained with a good example. This is excellent explanation. ❤
thank you brother
Best explanation I've seen so far
Thank you so much
well explained... good job 👍
Thank you 🙂
Sir, you are my new Hero. Im a novice in electronics and its my reg pwr supply Im trying to repair. My multi mtr showed nothing..my Esr mtr showed nothing and my component tester nothing.
For 220-240VAC --Should I use a 431 or 471 volt MOV?What would be the difference in leakage current at 240VAC?
you can use either 431 or 471 for 240vac but for more safety 431 is more recomend to use which will protect more safe for your circut board.
@@passiontechklm what about 20D391K vs 20D471K?
@@arkapadma 20D391 is more protective than 20D471 if you are using in 230vac circut board.
@@passiontechklm thanks a lot.
Is it still safe if we connect the varistor to L and N without fuse?
No safe, fuse is necessary calculated by load Amp since varistor is for surge protection so it must be both use .
Make subtitles in Hebrew as well. thanks.
Sucker board _😂😂😂_
@@Anthony_The_Chicken_Licker My bad 🤗😋
I came to lean about varistor. Now I understand. Thanks for sharing this👍.
@@SkySky-zr3bt I am very happy it helpful 😊
Thanks... Well explained with a good example. This is excellent explanation. ❤
thank you brother
Best explanation I've seen so far
Thank you so much
well explained... good job 👍
Thank you 🙂
Sir, you are my new Hero. Im a novice in electronics and its my reg pwr supply Im trying to repair. My multi mtr showed nothing..my Esr mtr showed nothing and my component tester nothing.
For 220-240VAC --
Should I use a 431 or 471 volt MOV?
What would be the difference in leakage current at 240VAC?
you can use either 431 or 471 for 240vac but for more safety 431 is more recomend to use which will protect more safe for your circut board.
@@passiontechklm what about 20D391K vs 20D471K?
@@arkapadma 20D391 is more protective than 20D471 if you are using in 230vac circut board.
@@passiontechklm thanks a lot.
Is it still safe if we connect the varistor to L and N without fuse?
No safe, fuse is necessary calculated by load Amp since varistor is for surge protection so it must be both use .
Make subtitles in Hebrew as well. thanks.
Sucker board _😂😂😂_
@@Anthony_The_Chicken_Licker My bad 🤗😋