As a former Dental Technician, I have used almost every type of burr imaginable. Also a GREAT alternative to flex driven handpiece and motor is a dental motor and handpiece. They are the longest lasting and smoothest running systems you can get. I do all kinds of jewelry and crafts and I could not function without one. So if you are ever in need of replacing your flex set up, look into the dental world of burrs and handpieces. One of the vey best catalogs for all of this is called Zahns. In my former job, I made teeth using precious and non precious metals, so the dental field and the jewelry field share many, many similar things. Soldering, casting, metal working, burrs, handpieces, etc. You may already know this but just thought I'd throw it out there in case you or anyone else would like to know! I really enjoyed your video and setup, it's very nice!!
Loved the vid. Thank you. One of the cheapest and best ways of dealing with accidental burns, at the bench, stove, BBQ is lavender essential oil. Keep a small bottle in all of those locations. You’ll be so grateful. Immediately after you’ve patted a few drops onto the burn, the sting disappears and in a day you won’t even remember where the injury was. 😅
Absolute beginner finding it overwhelming to know where to start. Your videos and kit lists have been incredibly helpful and appreciated! Hopefully next time I'm on the right continent I can take a class.
Now I know that it takes time, money, materials to get the job done. No one says a dollar figure on their studios. As a faceter, I know it is not cheap to do jewelry. Good video sir.
This was tremendously helpful and so timely. I am literally in the middle of setting up my jewelry work space after a move & was feeling overwhelmed & cranky! But you've given me a lot of good ideas & advice. Thank you!
I have not done jewelry in years. I really want to do it again and this video has given me hope in starting again. Thank you so much for the information and inspiration.
Thanks for this video! May I know what is the difference between the 2 torches? What does the other small one needs oxygen centrator while the Butane one doesn't?
Hi - Thanks for your comment and question. The butane torch is self contained. It holds the butane fuel and draws in its own air to modify the flame for soldering, etc. Butane is a home studio friendly gas. The Little Torch, which is shown with a disposable propane bottle and an oxygen concentrator, mixes the two gasses into a flame. By adjusting the mix with the knobs on the torch, you can make big and small flames, focused and fluffy. You can also change torch tips from tiny to large. The butane torch doesn't offer the same flame adjustment or exchange of tip sizes. In a sense, the butane torch could be seen as a starter torch, while the Smith Little Torch is a more professional and robust torch system. :^) Thanks for watching. Joe
I see. Thank you for your reply. May I know the difference between butane and propane besides portable or not? May I use propane at home? I dont know if the container is allowed at most condos? One more question still, my teacher uses white gas oil for his work, but I joined a online chat group of goldsmithing, people there tell me white gas oil is harmful for the immune system, and they use gasoline. I wonder how no one uses gasoline as fuel as I find out these goldsmithing videos on youtube? All of these goldsmiths use gas, but gas has a minor chance of explosion right? Will gasoline be a safer and healthier choice?@@SilveraJewelrySchool
@@IgalinaoAvolkovv Hi - You'll need to check with your local zoning and HOA re: fuels allowed in your condo. Most places are fine with butane. And a lot of places are fine with a 14 oz. disposable propane bottle or a 1 gallon small refillable propane tank. I'm not familiar with goldsmiths using white oil or gasoline. But I would think that would have a lot more fumes and explosive issues than butane or propane. Thanks again! Joe
Hi! Thanks for your question. It's a good one. In general, using an acetylene torch in your home is going to be a no: for safety, for local zoning, and for your home insurance. First, check with zoning and your insurance (these can be "what if..." questions, instead of "so I have a gas tank in my house, how do you feel about that"). Acetylene is rated an especially volatile gass. If you're using acetylene and air (like with a silversmithing style torch), your tips start larger than other jewelry torches. Maybe you're working on larger pieces. You can use different torch tips with a smaller torch to get a larger flame sizes, and use a safer setup like a small disposable propane bottle and oxygen concentrator, for big jobs like bracelets. In any case, whether you're setting up in your studio, garage or a spare room, check first to be sure it's ok and safe. Thanks for watching!
I have an issue and my work studio was dust. I’ve gotten a light piece of material to cover everything. However, I think I would prefer compartments or drawers. If you have any suggestions I’d love to hear them thank you for your video. Much appreciated. Excellent.
Hi @catherinemartina6469 - Dust sucks. Sounds like there's a lot of dust that is not from you but rather just from the space? Or maybe you're making the dust while making jewelry? In any case, I agree with using drawers to protect tools, etc. Covering your bench between work times is a good idea too, but be careful to make sure that your soldering surfaces and anything else hot like torch tips have cooled completely first. I would also suggest boxes with lids to keep dust off of your other materials. Let me know if you have any other questions. Thanks for watching!
Hi - Thanks! Good question. If it has a foot pedal option, that helps. Otherwise it can be difficult to not be able to turn it on and off and vary the speed, like you can with a foot pedal and a flex shaft. Also, there are more options for handpieces with a flex shaft, for comfort and to accommodate a variety of bit sizes. Micro motors usually fit only 3/32" mandrels. That said, if it's the tool you have, you'll learn to work with it. Joe
where is that jewelry bench from? who makes it? how wide is it? this video, and also the wax set up video are very helpful. thank you so much for posting
Hi Leslie - It's from OttoFrei.com. Item 113.016. But they have lots of similar models at different price points. The dimensions are listed on the page for each bench. Thanks for watching!
@@SilveraJewelrySchool The 113.016 is the BN-250 bench. Your bench looks like the MO-60 which is Otto Frei number 113.010 . They are both made by MasterCraft Workbenches in California.
Loved your video. So helpful! I’ve been slowly setting up my studio with the ‘necessities’ and I bought a Durston Superior Workbench as a birthday gift to myself. Since I too use a spare bedroom, I wanted my bench to look like a piece of furniture. It’s so nice, I’m afraid to drill holes in it! Haha. I’ll definitely check 9ut your online classes since I’m on the East Coast.
Great video! I absolutely adore your home studio set up, very practical and organized with all the essential tools and equipment, EXCEPT for a ventilation system! I understand that a traditional ventilation system can be quite expensive and complicated to install in a home studio. I use a benchtop fume extractor from Rio Grande, it's far from ideal but definitely better than breathing in the fumes from soldering all the time.
Good point! I'm lucky enough to work near a window and get good ventilation. But it is important to consider your health and set up a bench ventilation system. I should connect some ducting to a window fan and at least use that. Our filigree teacher, Milt Fischbein, set up a simple dust collection system with a shop vac and some nylon as a filter on the nozzle (next to the bench pin). He cleverly installed the vac in a separate room and ran the hose to his space, which really cut down on the noise. Thanks for taking the time to watch and comment.
Brand new....getting ready for my 4th tutoring session with a local silversmith artist. Have a dremel style tool holder I hoped to use, but I keep hearing that the flexible shaft is what I'll need, the other will prove to be too heavy...any thoughts? Thanks so much, Sharon
Hi Sharon! Yes, a flex shaft is superior to a Dremel, especially the handheld models. And once you've tricked out a Dremel to be like a flex shaft, the money spent would have purchased an entry level flex shaft. Dremel holders (do you mean a hanger?) tend to be too lightweight for flexshafts. Here's a link to an inexpensive one. You can screw it to a board and clamp that to your table with a c-clamp until you're ready to screw it into your bench. www.silverajewelry.com/store/w/id/1405/c/416/t/Flex-Shaft-Accessories/n/Flex-Shaft-Hanger-Screw-Mount/details.asp Thanks for watching!
Hi Joe Thanks for sharing your studio set up and ideas with reference to where supplies can be purchased. I have a studio in my basement which my husband is enlarging a bit so I can keep more of my equipment and supplies out where I can see them. I enjoyed seeing your storage supplies for that reason and will be putting the ideas to work to simplify my old and new areas! I’ve watched other videos you offer on soldering etc and appreciate your clear instructions. I will be looking into your online classes. Many thanks! Wendy
Thanks Joe! I'm getting ready to move and now I'm looking forward to redesigning my workspace, I got so many great ideas here. Looks like an Ikea trip is in my future!!! 😃
Thank you for sharing! This is an awesome video! I have my own studio for a few years now, but we're going to move next month and I was watching this for some inspiration when I set up my new studio soon :) I definitely got some new ideas (like the sewing-machine-foot-pedal-tip, genius!)
The little red files in the PVC tubes looks like little pigs in a blanket they look tasty 😋🤙🏻✨ Like Matlock Andy Griffith I’m always thinking of food he loved hotdogs also 👋🏻🤪.That’s a✨beautiful orderly jewelry makers room😌✌🏻happy new year my friend 🎉⚡️🇺🇸⚡️
This was helpful. I'm in the process of completely rearranging my studio to focus on soldering and setting so seeing how you organize/arrange was useful. Thank you. BTW, when I lived in Italy (1980s-late 90s), we ALL had large propane tanks in the kitchen to power the stove/ovens. Same ones used in US for outdoor BBQs. They were called "bombola". 🤔
Yes! We had a "bombola" propane tank when we lived in an apartment in Paris - the whole building had it. I always thought that either we Americans are more squeamish about living with propane tanks in our houses, or Parisians are more trustworthy not to blow themselves up. Jury's still out on that question. Good luck with the reorganization! Joe
@@SilveraJewelrySchool its an issue of old vs new. Old european bldgs cant easily be piped for gas and electric was and is so expensive. Older bldgs dont have modern electric capabilities so that and power costs ensured gas reigned. Add to that the VAT tax on new appliance...old gas stoves can last a long as time.
Hi - We currently offer a class called Torch Setup and Safety. It covers setting up a oxygen concentrator. We just had one a month or so ago. If you'd like to be notified when we have it again, go to our website and email us or sign up for our email list. SilveraJewelrySchool.com. We could also go over this as a private lesson. Our classes are online or in person and are very informative.
Wonderful video, very helpful, thank you. One question if I may, where did you get the 'Burr Life' cone from? I've asked others but never got a reply... Steve...
Hi! It's hard to quiet the sound completely, but if you put something under your steel block it can make the sound not quite so sharp. I used to put a mouse pad underneath it. You can also use some leather, cloth or a sandbag. Also, try moving your block so that it is over something solid like a table leg. That should reduce extra sound from hammering, because it's not hollow underneath it. You'll still hear hammering.
This is amazing!! I'm curious about the oxygen concentrator. Does this require oxygen tanks or does it take it from the air? And do you have a video on how to set it up? I would love to get one if it means I don't have to go to the sexist welding store in my town.
The concentrator is a medical breathing device, but it's been refurbished for use with a torch. Lampworkers use them all the time because oxygen is used up the fastest. So no oxygen tank. You turn it on and wait a few minutes for it to pressurize, wake up, drink its coffee or whatever it does and then you're good to go. I don't have a video on how to set it up, but check out RioGrande.com. They sell them. The set up is pretty easy. It's pretty close to connect the oxygen line and go. We offer a torch safety and set up class at our school and we're offering an online version this year. SilveraJewelrySchool.com/classes
And LOL! Sexist welding supply. Right. Even I as a dude can detect the concentrated testosterone in those shops. Lots of women welders, jewelers, etc, so start treating women nicer, I say.
NO! Go to the sexist welding store and de-sex it immediately. If you have a problem with them delve into the problem and dismantle it. Ask them if you need a sex change operation to shop there. Be sure to look as feminine and sexy as you can when you go there, and also ask if your money is painted pink or green like the guys. Do not stay away. Visit them every day and be sure to ask them in such a way as to intimidate with your own knowledge of welding. I never miss the opportunity to bust up any sexism around me. I am a regular at Home Depot and I know more than most of the workers. I often help out customers with their project questions. They have a lot of respect for me. Once they only had leather gloves in men's sizes L and XL. I asked the manager nicely if they could carry smaller sizes. He was dismissive. So I stood in the middle of the store and in my very loud voice asked - "Do I need a sex change operation to shop at Home Depot, or can you carry these also in Women's sizes? Do you think my money is not worth the same as a man? What do I need to do to get some respect in here?". That did it. Next week they had the smaller sizes on the shelf. No disrespect either. You must command respect above all.
I have a bench lathe like yours. But it lacks an enclosure. Can you tell me where I might get one like the one you have with the great sign "No gloves or loose clothing?"
Hi! No problem. We sell it here www.silverajewelry.com/store/w/id/1147/c/417/t/bench-top-polisher-accessories/n/bench-top-polisher/details.asp Thanks! Joe
Actually I do have a question r/t bezels. I’m good with creating bezels and soldering to a back plate. When I push the bezel over the stone I don’t know how to get and nice smooth surround around the stone face. I push the bezel from opposite sides and try to get a nice smooth frame but always seem to end up with some “krinkles” even after I burnish. Any advice I can work on? Thanks 🙏
Hi. You may be hitting the edges of the tool you're using for crimping (bezel rocker, prong pusher, burnisher). Softening the edges helps. Be sure to push down all the micro puckers too, before burnishing. Burinish in small sections, 1/8-1/4" of the bezel at a time, and hard enough to bevel the bezel. If you still have marks use a 600 grit sanding stick or similar grit abrasive rubber wheel to polish the top of the bezel, being careful to avoid the stone. Then repeat your burnishing or buff to a high luster, if that's what you'd like for a final finish. Hope this helps. Happy setting!
Hello Joe, Thanks for the great video. Having a torch inside a home is always a challenge. What is your opinion on a silversmith torch that uses acetylene and air in a home studio? I learned on this torch and am comfortable using it in school settings. Does it transition well to home use?
Hi - Acetylene and air torches are great systems for soldering, annealing and even casting. But not every city or county is ok with acetylene inside a home or even your garage. It's a good idea to start by calling your local zoning office and ask what the general code is on tanks, allowed fuel gasses, and maximum cubic feet of gas allowed. The next call, as discreetly as possible would be to your home insurance or to a similar competitor to see if you can have acetylene and still have coverage. In my experience, it's not allowed in cities and more likely to be allowed the more your area is rural or unincorporated. Good luck! If you find out that you can't use acetylene, you can do a lot with a oxygen concentrator and a small bottle of propane, including using melting tips or other size tips that you can get from PaigeTools.com.
@@SilveraJewelrySchool Oxygen Concentrators are high price to buy new, but you can find them at estate sales, garage sales, your local Salvation Army and Goodwill store's for anywhere from $5.00 to $25.00 But their well worth picking up!
Great video thanks! Question regarding you oxygen coy. I also use an oxygen concentrator and am having an issue with the oxygen beeping if I want to use a small torch tip with less oxygen. How do you manage using a small tip with the slowest flow setting without your concentrator shutting off? I'm also curious if anyone else has had this issue and how they resolved it.
Hi Jojo - Thanks for watching and for your question. My unit doesn't beep. I get this question all the time, and since it's not something that I encounter with my concentrator, I can't offer a solution. Have you tried contacting the manufacturer or reseller? Good luck! Joe
Oh that would be fun to make. I don't have any experience with building one in that kind of space. Is the whole trailer dedicated to the studio or just a portion of it? Let me know and maybe I can offer some tips. I would make sure, if you're going to solder, to include a solution for ventilation. Plus if it's going to travel, you're organization should address keeping tools from flying around while the trailer is on the go. Obvious, but just in case... :^) Thanks for watching!
@@travishaugen4403 Hi. Well, you can build in a bench, using commercial ones as a guide. Also, this book, The Jewelers Bench Book, by Charles Lewton Brain, is full of great ideas for organizing your bench and studio. Remember ventilation, and I would keep any gas for a torch to a minimum. Maybe you can run a line to an outside propane tank and use either a small 20 cf bottle of oxygen or an oxygen canister, if you're using a 2 gas torch like a Smith Little Torch. I know some trailers have solutions like this to keep gas stored outside. Since the trailer is a small space, being careful about gas building up inside is critical. You can also install an explosive gas detector inside the trailer (rated for your fuel gas, like LPG/propane). This is like a smoke detector, but it warns you when it detects too much gas. Good luck! I'd love to see pics when you're done.
Hi! We have some kits of basic tools for making jewelry that you can check out. Go to www.silverajewelry.com/store/w/c/309/t/Kits/browse.asp Thanks for watching!
I got the sewing pedal mat for my foot pedals through Amazon, but you might be able to find it at a craft store that sells sewing stuff. Thanks for watching!
@@stephenkirnon Hey. Setting up for casting is a lot to describe. We offer lots of info on casting in our Lost Wax 1 Basics class, available online at SilveraJewelrySchool.com/classes. We also offer private lessons. In anycase, make sure you have good ventilation so that you don't fill up your house with casting fumes. Best to you!
Hey Joe, I just started jewelry making when i use the hand sew blade my arm's swell up could i use metal shares instead , i feel like am taking a short cut out of jewelry making :(
Shears will cut up to 20 gauge in softer alloys. So brass and nickel will be tougher to shear. Maybe the ergonomics of your sawing aren't the best? If you're hold the saw too firmly, bending your wrist too much etc. you could be damaging your arms. We go over ergonomics in our jewelry classes so people can avoid injuries. You could also go old school and cut your metal with a chisel and hammer on a steel block (a block you don't mind denting a lot!).
As a former Dental Technician, I have used almost every type of burr imaginable. Also a GREAT alternative to flex driven handpiece and motor is a dental motor and handpiece. They are the longest lasting and smoothest running systems you can get. I do all kinds of jewelry and crafts and I could not function without one. So if you are ever in need of replacing your flex set up, look into the dental world of burrs and handpieces. One of the vey best catalogs for all of this is called Zahns. In my former job, I made teeth using precious and non precious metals, so the dental field and the jewelry field share many, many similar things. Soldering, casting, metal working, burrs, handpieces, etc. You may already know this but just thought I'd throw it out there in case you or anyone else would like to know! I really enjoyed your video and setup, it's very nice!!
Hey! Thanks for the info. Glad you liked the video!
Thanks for the information 👍
Loved the vid. Thank you. One of the cheapest and best ways of dealing with accidental burns, at the bench, stove, BBQ is lavender essential oil. Keep a small bottle in all of those locations. You’ll be so grateful. Immediately after you’ve patted a few drops onto the burn, the sting disappears and in a day you won’t even remember where the injury was. 😅
the drawer pull blew my mind that's such a good idea man
Absolute beginner finding it overwhelming to know where to start. Your videos and kit lists have been incredibly helpful and appreciated! Hopefully next time I'm on the right continent I can take a class.
Super helpful! Lots of ideas for improving my space.
Glad it was helpful!
Great video and easy to follow!
Great to hear! Thanks, Joe
Great video, very Informative. Love the polishing bit organiser, where did you get it?
Love the footpedal
I was looking for more ways to organize my space and I'm so glad I found your video! Great tips and idea, thank you!
You are so welcome! I'm so glad that it was helpful.
Now I know that it takes time, money, materials to get the job done. No one says a dollar figure on their studios. As a faceter, I know it is not cheap to do jewelry. Good video sir.
Thanks for the tour! Great ideas!
This was tremendously helpful and so timely. I am literally in the middle of setting up my jewelry work space after a move & was feeling overwhelmed & cranky! But you've given me a lot of good ideas & advice. Thank you!
I have not done jewelry in years. I really want to do it again and this video has given me hope in starting again. Thank you so much for the information and inspiration.
Thanks for this video! May I know what is the difference between the 2 torches? What does the other small one needs oxygen centrator while the Butane one doesn't?
Hi - Thanks for your comment and question. The butane torch is self contained. It holds the butane fuel and draws in its own air to modify the flame for soldering, etc. Butane is a home studio friendly gas. The Little Torch, which is shown with a disposable propane bottle and an oxygen concentrator, mixes the two gasses into a flame. By adjusting the mix with the knobs on the torch, you can make big and small flames, focused and fluffy. You can also change torch tips from tiny to large. The butane torch doesn't offer the same flame adjustment or exchange of tip sizes. In a sense, the butane torch could be seen as a starter torch, while the Smith Little Torch is a more professional and robust torch system. :^) Thanks for watching. Joe
I see. Thank you for your reply. May I know the difference between butane and propane besides portable or not? May I use propane at home? I dont know if the container is allowed at most condos? One more question still, my teacher uses white gas oil for his work, but I joined a online chat group of goldsmithing, people there tell me white gas oil is harmful for the immune system, and they use gasoline. I wonder how no one uses gasoline as fuel as I find out these goldsmithing videos on youtube? All of these goldsmiths use gas, but gas has a minor chance of explosion right? Will gasoline be a safer and healthier choice?@@SilveraJewelrySchool
@@IgalinaoAvolkovv Hi - You'll need to check with your local zoning and HOA re: fuels allowed in your condo. Most places are fine with butane. And a lot of places are fine with a 14 oz. disposable propane bottle or a 1 gallon small refillable propane tank. I'm not familiar with goldsmiths using white oil or gasoline. But I would think that would have a lot more fumes and explosive issues than butane or propane. Thanks again! Joe
thank you so much for your detailed reply!@@SilveraJewelrySchool
Thank you so much for this information!
You are so welcome!
And here I was feeling quite proud of my little set up... and then I saw Joe’s. Something to aim for when I level up. Thanks for sharing.
A tool or two every month or so... you'll have the studio of your dreams in no time! :^)
Working on it...
Thank you ! This was some awesome info !!!
Great advice. Thank you.
Nice video! I'm thinking about using an air acetylene torch. Would this be a safe option in a home? Thanks!
Hi! Thanks for your question. It's a good one. In general, using an acetylene torch in your home is going to be a no: for safety, for local zoning, and for your home insurance. First, check with zoning and your insurance (these can be "what if..." questions, instead of "so I have a gas tank in my house, how do you feel about that"). Acetylene is rated an especially volatile gass. If you're using acetylene and air (like with a silversmithing style torch), your tips start larger than other jewelry torches. Maybe you're working on larger pieces. You can use different torch tips with a smaller torch to get a larger flame sizes, and use a safer setup like a small disposable propane bottle and oxygen concentrator, for big jobs like bracelets. In any case, whether you're setting up in your studio, garage or a spare room, check first to be sure it's ok and safe. Thanks for watching!
Great tips, Thank you.
This is wonderful, especially the torch option for in-home use. Thank you!
I have an issue and my work studio was dust. I’ve gotten a light piece of material to cover everything. However, I think I would prefer compartments or drawers. If you have any suggestions I’d love to hear them thank you for your video. Much appreciated. Excellent.
Hi @catherinemartina6469 - Dust sucks. Sounds like there's a lot of dust that is not from you but rather just from the space? Or maybe you're making the dust while making jewelry? In any case, I agree with using drawers to protect tools, etc. Covering your bench between work times is a good idea too, but be careful to make sure that your soldering surfaces and anything else hot like torch tips have cooled completely first. I would also suggest boxes with lids to keep dust off of your other materials. Let me know if you have any other questions. Thanks for watching!
Excellent video, do you think a micro motor can completely replace a flex shaft system ?
Hi - Thanks! Good question. If it has a foot pedal option, that helps. Otherwise it can be difficult to not be able to turn it on and off and vary the speed, like you can with a foot pedal and a flex shaft. Also, there are more options for handpieces with a flex shaft, for comfort and to accommodate a variety of bit sizes. Micro motors usually fit only 3/32" mandrels. That said, if it's the tool you have, you'll learn to work with it. Joe
where is that jewelry bench from? who makes it? how wide is it? this video, and also the wax set up video are very helpful. thank you so much for posting
Hi Leslie - It's from OttoFrei.com. Item 113.016. But they have lots of similar models at different price points. The dimensions are listed on the page for each bench. Thanks for watching!
@@SilveraJewelrySchool The 113.016 is the BN-250 bench. Your bench looks like the MO-60 which is Otto Frei number 113.010 . They are both made by MasterCraft Workbenches in California.
@@Braz1956 Yes, the 113.010 is closer to my bench. They're pretty similar. :^)
EXACTLY WHAT I NEEDED!
Great workspaces
Loved your video. So helpful! I’ve been slowly setting up my studio with the ‘necessities’ and I bought a Durston Superior Workbench as a birthday gift to myself. Since I too use a spare bedroom, I wanted my bench to look like a piece of furniture. It’s so nice, I’m afraid to drill holes in it! Haha. I’ll definitely check 9ut your online classes since I’m on the East Coast.
Great video! I absolutely adore your home studio set up, very practical and organized with all the essential tools and equipment, EXCEPT for a ventilation system! I understand that a traditional ventilation system can be quite expensive and complicated to install in a home studio. I use a benchtop fume extractor from Rio Grande, it's far from ideal but definitely better than breathing in the fumes from soldering all the time.
Good point! I'm lucky enough to work near a window and get good ventilation. But it is important to consider your health and set up a bench ventilation system. I should connect some ducting to a window fan and at least use that. Our filigree teacher, Milt Fischbein, set up a simple dust collection system with a shop vac and some nylon as a filter on the nozzle (next to the bench pin). He cleverly installed the vac in a separate room and ran the hose to his space, which really cut down on the noise. Thanks for taking the time to watch and comment.
Brand new....getting ready for my 4th tutoring session with a local silversmith artist. Have a dremel style tool holder I hoped to use, but I keep hearing that the flexible shaft is what I'll need, the other will prove to be too heavy...any thoughts? Thanks so much, Sharon
Hi Sharon! Yes, a flex shaft is superior to a Dremel, especially the handheld models. And once you've tricked out a Dremel to be like a flex shaft, the money spent would have purchased an entry level flex shaft. Dremel holders (do you mean a hanger?) tend to be too lightweight for flexshafts. Here's a link to an inexpensive one. You can screw it to a board and clamp that to your table with a c-clamp until you're ready to screw it into your bench. www.silverajewelry.com/store/w/id/1405/c/416/t/Flex-Shaft-Accessories/n/Flex-Shaft-Hanger-Screw-Mount/details.asp
Thanks for watching!
Hi Joe Thanks for sharing your studio set up and ideas with reference to where supplies can be purchased. I have a studio in my basement which my husband is enlarging a bit so I can keep more of my equipment and supplies out where I can see them. I enjoyed seeing your storage supplies for that reason and will be putting the ideas to work to simplify my old and new areas! I’ve watched other videos you offer on soldering etc and appreciate your clear instructions. I will be looking into your online classes. Many thanks! Wendy
Thank you for watching! Let me know if you have any questions.
Thanks Joe! I'm getting ready to move and now I'm looking forward to redesigning my workspace, I got so many great ideas here. Looks like an Ikea trip is in my future!!! 😃
It's exciting to redesign your workspace. Enjoy! If you have any questions when you're in the midst of it, let me know. Thanks for watching.
Thank you for sharing! This is an awesome video! I have my own studio for a few years now, but we're going to move next month and I was watching this for some inspiration when I set up my new studio soon :) I definitely got some new ideas (like the sewing-machine-foot-pedal-tip, genius!)
The little red files in the PVC tubes looks like little pigs in a blanket they look tasty 😋🤙🏻✨ Like Matlock Andy Griffith I’m always thinking of food he loved hotdogs also 👋🏻🤪.That’s a✨beautiful orderly jewelry makers room😌✌🏻happy new year my friend 🎉⚡️🇺🇸⚡️
This was helpful. I'm in the process of completely rearranging my studio to focus on soldering and setting so seeing how you organize/arrange was useful. Thank you.
BTW, when I lived in Italy (1980s-late 90s), we ALL had large propane tanks in the kitchen to power the stove/ovens. Same ones used in US for outdoor BBQs. They were called "bombola". 🤔
Yes! We had a "bombola" propane tank when we lived in an apartment in Paris - the whole building had it. I always thought that either we Americans are more squeamish about living with propane tanks in our houses, or Parisians are more trustworthy not to blow themselves up. Jury's still out on that question. Good luck with the reorganization! Joe
@@SilveraJewelrySchool its an issue of old vs new. Old european bldgs cant easily be piped for gas and electric was and is so expensive. Older bldgs dont have modern electric capabilities so that and power costs ensured gas reigned. Add to that the VAT tax on new appliance...old gas stoves can last a long as time.
Can you show how to set up the oxygen concentrator and propane? It would help me id like to change over
Hi - We currently offer a class called Torch Setup and Safety. It covers setting up a oxygen concentrator. We just had one a month or so ago. If you'd like to be notified when we have it again, go to our website and email us or sign up for our email list. SilveraJewelrySchool.com. We could also go over this as a private lesson. Our classes are online or in person and are very informative.
Thank you!
ty
Wonderful video, very helpful, thank you. One question if I may, where did you get the 'Burr Life' cone from? I've asked others but never got a reply... Steve...
No problem. I get the cone and mounting plate from RioGrande.com
www.riogrande.com/product/burlife-bench-mount-lubricant/117006
@@SilveraJewelrySchoolthank you...
I live in a second floor apartment. Any advice on reducing impact noises when hammering pieces?
I'm worried about my neighboors downstairs.
Hi! It's hard to quiet the sound completely, but if you put something under your steel block it can make the sound not quite so sharp. I used to put a mouse pad underneath it. You can also use some leather, cloth or a sandbag. Also, try moving your block so that it is over something solid like a table leg. That should reduce extra sound from hammering, because it's not hollow underneath it. You'll still hear hammering.
This is amazing!! I'm curious about the oxygen concentrator. Does this require oxygen tanks or does it take it from the air? And do you have a video on how to set it up? I would love to get one if it means I don't have to go to the sexist welding store in my town.
The concentrator is a medical breathing device, but it's been refurbished for use with a torch. Lampworkers use them all the time because oxygen is used up the fastest. So no oxygen tank. You turn it on and wait a few minutes for it to pressurize, wake up, drink its coffee or whatever it does and then you're good to go. I don't have a video on how to set it up, but check out RioGrande.com. They sell them. The set up is pretty easy. It's pretty close to connect the oxygen line and go. We offer a torch safety and set up class at our school and we're offering an online version this year. SilveraJewelrySchool.com/classes
And LOL! Sexist welding supply. Right. Even I as a dude can detect the concentrated testosterone in those shops. Lots of women welders, jewelers, etc, so start treating women nicer, I say.
NO! Go to the sexist welding store and de-sex it immediately. If you have a problem with them delve into the problem and dismantle it. Ask them if you need a sex change operation to shop there. Be sure to look as feminine and sexy as you can when you go there, and also ask if your money is painted pink or green like the guys. Do not stay away. Visit them every day and be sure to ask them in such a way as to intimidate with your own knowledge of welding. I never miss the opportunity to bust up any sexism around me. I am a regular at Home Depot and I know more than most of the workers. I often help out customers with their project questions. They have a lot of respect for me. Once they only had leather gloves in men's sizes L and XL. I asked the manager nicely if they could carry smaller sizes. He was dismissive. So I stood in the middle of the store and in my very loud voice asked - "Do I need a sex change operation to shop at Home Depot, or can you carry these also in Women's sizes? Do you think my money is not worth the same as a man? What do I need to do to get some respect in here?". That did it. Next week they had the smaller sizes on the shelf. No disrespect either. You must command respect above all.
Thank you, nice set up 👍
Thanks.
I have a bench lathe like yours. But it lacks an enclosure. Can you tell me where I might get one like the one you have with the great sign "No gloves or loose clothing?"
Hi! No problem. We sell it here www.silverajewelry.com/store/w/id/1147/c/417/t/bench-top-polisher-accessories/n/bench-top-polisher/details.asp
Thanks! Joe
thanks
Actually I do have a question r/t bezels. I’m good with creating bezels and soldering to a back plate. When I push the bezel over the stone I don’t know how to get and nice smooth surround around the stone face. I push the bezel from opposite sides and try to get a nice smooth frame but always seem to end up with some “krinkles” even after I burnish. Any advice I can work on? Thanks 🙏
Hi. You may be hitting the edges of the tool you're using for crimping (bezel rocker, prong pusher, burnisher). Softening the edges helps. Be sure to push down all the micro puckers too, before burnishing. Burinish in small sections, 1/8-1/4" of the bezel at a time, and hard enough to bevel the bezel. If you still have marks use a 600 grit sanding stick or similar grit abrasive rubber wheel to polish the top of the bezel, being careful to avoid the stone. Then repeat your burnishing or buff to a high luster, if that's what you'd like for a final finish. Hope this helps. Happy setting!
Hello Joe,
Thanks for the great video. Having a torch inside a home is always a challenge. What is your opinion on a silversmith torch that uses acetylene and air in a home studio? I learned on this torch and am comfortable using it in school settings. Does it transition well to home use?
Hi - Acetylene and air torches are great systems for soldering, annealing and even casting. But not every city or county is ok with acetylene inside a home or even your garage. It's a good idea to start by calling your local zoning office and ask what the general code is on tanks, allowed fuel gasses, and maximum cubic feet of gas allowed. The next call, as discreetly as possible would be to your home insurance or to a similar competitor to see if you can have acetylene and still have coverage. In my experience, it's not allowed in cities and more likely to be allowed the more your area is rural or unincorporated. Good luck! If you find out that you can't use acetylene, you can do a lot with a oxygen concentrator and a small bottle of propane, including using melting tips or other size tips that you can get from PaigeTools.com.
@@SilveraJewelrySchool Oxygen Concentrators are high price to buy new, but you can find them at estate sales, garage sales, your local Salvation Army and Goodwill store's for anywhere from $5.00 to $25.00 But their well worth picking up!
Great video thanks! Question regarding you oxygen coy. I also use an oxygen concentrator and am having an issue with the oxygen beeping if I want to use a small torch tip with less oxygen. How do you manage using a small tip with the slowest flow setting without your concentrator shutting off? I'm also curious if anyone else has had this issue and how they resolved it.
Hi Jojo - Thanks for watching and for your question. My unit doesn't beep. I get this question all the time, and since it's not something that I encounter with my concentrator, I can't offer a solution. Have you tried contacting the manufacturer or reseller? Good luck! Joe
Any idea for a travel trailer studio
Oh that would be fun to make. I don't have any experience with building one in that kind of space. Is the whole trailer dedicated to the studio or just a portion of it? Let me know and maybe I can offer some tips. I would make sure, if you're going to solder, to include a solution for ventilation. Plus if it's going to travel, you're organization should address keeping tools from flying around while the trailer is on the go. Obvious, but just in case... :^) Thanks for watching!
@@SilveraJewelrySchool just a portion
@@travishaugen4403 Hi. Well, you can build in a bench, using commercial ones as a guide. Also, this book, The Jewelers Bench Book, by Charles Lewton Brain, is full of great ideas for organizing your bench and studio. Remember ventilation, and I would keep any gas for a torch to a minimum. Maybe you can run a line to an outside propane tank and use either a small 20 cf bottle of oxygen or an oxygen canister, if you're using a 2 gas torch like a Smith Little Torch. I know some trailers have solutions like this to keep gas stored outside. Since the trailer is a small space, being careful about gas building up inside is critical. You can also install an explosive gas detector inside the trailer (rated for your fuel gas, like LPG/propane). This is like a smoke detector, but it warns you when it detects too much gas. Good luck! I'd love to see pics when you're done.
I need a all tools pls show me ur all tools video
Hi! We have some kits of basic tools for making jewelry that you can check out. Go to www.silverajewelry.com/store/w/c/309/t/Kits/browse.asp
Thanks for watching!
hi where did you get the mat from
I got the sewing pedal mat for my foot pedals through Amazon, but you might be able to find it at a craft store that sells sewing stuff. Thanks for watching!
@@SilveraJewelrySchool hi I'm setting up a casting and burnout in my second bedroom what is the best way to setup my casting area thank you
@@stephenkirnon Hey. Setting up for casting is a lot to describe. We offer lots of info on casting in our Lost Wax 1 Basics class, available online at SilveraJewelrySchool.com/classes. We also offer private lessons. In anycase, make sure you have good ventilation so that you don't fill up your house with casting fumes. Best to you!
Hey Joe, I just started jewelry making when i use the hand sew blade my arm's swell up could i use metal shares instead , i feel like am taking a short cut out of jewelry making :(
Shears will cut up to 20 gauge in softer alloys. So brass and nickel will be tougher to shear. Maybe the ergonomics of your sawing aren't the best? If you're hold the saw too firmly, bending your wrist too much etc. you could be damaging your arms. We go over ergonomics in our jewelry classes so people can avoid injuries. You could also go old school and cut your metal with a chisel and hammer on a steel block (a block you don't mind denting a lot!).
Thank you, amazing
Great
height vs heighth
Thank YOU!!!