Front end GREASE job - ARE YOU doing IT?
Вставка
- Опубліковано 26 сер 2024
- WATCH THIS PLAYLIST!! • Superduty Front End re...
Remember that "Grease Job & oil change"??? YEAH well DON'T forget!! What up Superduty Gang!!! Welcome back. Follow is tonight and watch me hit every grease point on this F450 Ambulance. Tell me now, now don't lie, are YOU greasing your front end???? Let us know! THANKS so much for watching each weeks episode, means a lot. Let me know below friends & tell me what you all think! Remember to LIKE - COMMENT - SUB - SHARE #fordtrucks #grease #fyp
Join this channel to get access to perks:
/ @powerstroketechtalkwarod
Need something you see me use, I probably got it on Amazon. Use my link below to get PTT tools
amzn.to/3wGaElA
USE STORE CODE pttwarod-20
*****************************************************************
Check out our coffee LINE!!!!!!👈👈👈👈👈👈👈👈👈
society-of-auto...
*****************************************************************
To get hooked up like PTT please check out this link!
You won't be disappointed, I wasn't...trust me, ALL worth it!
****** www.limitlessau... ******
**********************************
CHANGE YOUR Rear End FACTORY FLUID HERE!!!
• FORD Superduty - Rear ...
Check out these other 6.7 Playlists!!
6.7 Oil Seals Replacements
• FORD 6.7 Oil Leak Repa...
6.7 Turbo Videos
• Ford 6.7 Powerstroke T...
6.7 Repair Videos
• FORD 6.7 Powerstroke R...
6.7 Engine Light Videos
• FORD 6.7 ENGINE LIGHT ...
6.7 Maintenance Videos
• FORD POWERSTROKE MAINT...
Check out my Instagram & Facebook
@PTT_W_AROD / Aaron Power Stroke
Business Inquiries: powerstroketechtalkwarod@gmail.com
Wanna send me something P.O. Box 531458 Livonia, MI 48153
Music: ------------------------------
Slynk - UA-cam Audio Library
------------------------------
To send a small donation to help my channel grow & to also to contact me, please visit my Paypal at my email powerstroketechtalkwarod@gmail.com
I am the creator and owner of this material. It does not belong to; nor is affiliated with ANYONE, except for me, the owner and creator. Downloading is strictly forbidden. Contact me if you want my material, its that simple! The events, the characters & even the firms depicted in my photoplay are fictitious. Any similarity to actual events, persons living or dead or to that of actual entities are purely coincidental.
This video might be your fix!!
ua-cam.com/video/ZM9ezMtiOSE/v-deo.html
No
I wish ford would put grease fittings on all their super dutys
They use too.
Yeah my 07 my 13 and my 22 never had any grease fittings just the u-joints at the front hubs
Nobody ever does it its not till you get into the bigger trucks with king pins and leaf spring front ends
I have the same problem with my '22 F250. How do you grease the joints with no fittings?
@Twinkying you only have them on the 4x4 axle shafts up front, that's it
I was taught to leave a big glob on the zerk... kinda protects the fitting and big enough glob stops dirt from getting anywhere near the fitting. when you wipe it off nothing but fresh grease touching the zerk
Hey guys just a tip I was shown, always jack up your front end just enough to take the pressure off the steering components you don’t need a lift or to take the wheels off, you just want to take the weight off your steering components letting your front suspension droop out, if you can see light under your steering tires that’s high enough. This is to allow the fresh grease to reach in between joints and shafts much easier. If your normal routine is greasing without taking the weight off the steering components the first time you grease your truck with the front end sagged out you’ll notice the difference on that first squeeze the grease gun. Personally I pump then crank the wheel back and forth and go back and pump again but I kind of have a little ocd so to each their own lol
👍👍
Thanks! Your videos are INVALUABLE.
Thank you so much pal!!!
one of my favorite diy services. it's easy and takes about 20 mins start to finish. red and tacky grease for me. Great trick for getting the upper ball joint. I have a 90 degree fitting. makes drag link easier as well as upper ball joint
This was a really good video on how much grease to use when greasing your vehicle. I still grease everything at every oil change and that electric grease gun is an game changer.
Great info! Lucas red n tacky or Amsoil.
Shell SRS2000 is awesome grease for wheel bearing especially boats. It absorbs water and turns pink but still lubricates and protects. Awesome grease worth every penny
Always cleaned my mess up but gotta admit I was pumping way too much grease. Appreciate the info!
I wish Ford would put grease fittings on the drive shaft but they are getting CHEAP come on Ford 🤣
Great video MR A-ROD
Replacements get fittings. It’s been a long time since I’ve seen grease fittings on factory driveline U-Joints.
Thanks, never really been shown how to grease properly. Great tips on how todo it professionally.
Nicely informative on all the mechanical subtleties. Thank you so much!
It was suggested to me to use marine grease in the front end and axle U-joints especially. It made a difference on my old Dana 44. Less joint fail
Lucas Red n Tacky #2 is what I use
I change my oil every 4K so as the oil is draining i grease the frontend as well.
Every time one comes in for service, esp the axle joints.
I wish they would put fittings on all of them. I had a tie rod end go at 120,000 miles. It punched a hole in the wheel, and ruined the tire. Left me stranded, with a big Bill, including the tow.
But at least some bean counter saved 50 cents per truck by eliminating grease fittings.
Actually have a bunch of front end joints and rods ready to replace in the next couple weeks. Good stuff
I have the 18 volt grease gun . And I did buy the adapter for that upper grease fitting I don’t have the option of raising the truck up. Also have my wife roll the truck and tell her to stop to get to the U joint fitting.
Use Lucas red tacky and mobile 1...
My vehicles are fully AmsOil; including the grease.
Thanks for making a video from the early 90’s
Red n Tacky
Moly grease is for high pressure areas, the spicer joints you use bearing grease for high heat and rotation areas.
Great video! What are your thoughts on giving the UJoints a good douching of break cleaner to remove old grease/dirt before adding new grease?
#brakecleanmafia soak that mutha 🫡
So the grease points on the 250/350 are just the 4wd axle u-joint, correct?
I guess I found out what I will be doing next weekend!
So many either don’t grease them when they should or over grease them and don’t clean up the excess. Grease outside collects grit, that grit eats at seals till more grit gets inside.
I use Valvoline VV633. Says for Ford vehicles and meets M1C75B.
Same
Sweet shop…👊🏻
Air horns facing forward need covers to keep the bugs out. My Pete even caught a small bird once. They aren’t effective when plugged up.
After watching the video bro, Now I'm gonna have to crawl under the 250 tomorrow and make sure my local dealership just did this. I know I have a couple grease points under there, at least. Wish I had and air conditioned shop, as it's supposed to be 110 degrees tomorrow.
Ughhhh
How many of you watching this or following this channel are actually wiping off the zerks? I do, out of habit. I know others I work with (and have worked with) are too lazy do wipe a zerk off.
Wipe it baby
That steering sensor that is flopping around tells the LiquidSpring rear suspension when you are turning so it can anticipate a little ahead of time to level the rear end. Love the ambulance vid! How many miles on that bus before it required a front end job? My highway trucks go 100K+ intervals.
Moly grease would be good for this application
sweet! thanks!
If you are only supposed to grease it until the boot is full, how do you add more grease the next oil change without popping the boot? The grease doesn't just disappear after driving 3k miles, right? Also, what do you think of the driveshaft manufacturer recommendations that say to add grease to u joints until it's coming out of all the needle bearing caps?
SURPRISE!!! No zerks on new 2023 f450 ball joints or u joints!!
Love those air horns poking out the air dam. I bet those get the distracted drivers\walkers attention 🎉RightAway!🔊👌😕👍
At first, i thought they were turbo intakes. Lol💨🔊✔️🤔
Those bigboy portable lifts are crazy! I know they're real strong, but I'd still be a lil nervous being under a 10k lb vehicle, especially when they are not bolted down & could potentially move\lean\shift. 🤷🏼♂️😆🛠️ I know they won't...but It'd still be in the back of my mind. 🤔🍻
Our ambulances tip the scales at 14K. Prob what that one weighs also.@@tdotw77
Red n tacky
I also have the m12 grease gun, it’s not bad for the price.
Did they recently start using all those grease fittings again? My 05 F550 didn't have any of those until I had to replace the front end components.
Those shld have had it
Mine doesn’t have any either
Do the door handles have grease fittings? Customer love that when you grease the door handles
That's what Anti-sieze is for.
Commenting on the video for the algorithm
Thanks for caring
What type of grease is that? I try to use polyurea on frictionless bearings (ball, roller, needle) and lithium moly for pins/bushings and ball joints.
It's Motorcraft XG-1-E1 grease.
I have a 2023 F250 Tremor. There is not a single grease zerk on the truck.
Nope
how many grease points does the f250 2011-2014 have? also can I use the same grease fluid for them?
Just purchased a 23 6.7 HO. This is my first diesel. I just finished the 1,000 mile break in. Are you supposed to change both fuel filters every 5,000 miles? I’ve heard and found conflicting information. Thank you!
I do every other oil change. I dont care what anyone says...what i see come in...😬
Thank you!
Found you from Raymond good stuff i like your content , I have a gen 13 f150 5.0 , I want to ask you just a question were could I sent it .
Hey welcome pal, email is in all video descriptions
I use Mobil 1 full synthetic.
I have a 2020 F350 with zerk fittings only on the Ujoints. Can you add zerk fitting on the pitman arm and ball joints?
How often should we be doing this?
So my 2018 would only have 2 grease fittings?
Also, what is your opinion about running the H&S upper fuel filter? Better or worse filtration? I know they say it’s more flow
Paragon 3000
So why can a modern f450 tow like 2x as much as one from 20 years ago? What changes, is it just a matter of power or is it brakes/frame/suspension? They're nearly identical weight and the brakes look the same, really the big difference, I can tell is the power, 275 hp vs 450 hp. But the old 7.3 can duplicate that power so would it be reasonable to think if someone has chipped their old f450 that they could then tow 26000lbs?
We can't keep front ends under them no matter how well and often we service.
Out of Curiosity how often should you be greasing the front ends. I dont have a 3/4 or 1 ton just a f150. Thanks for the input
I’m a Ford tech that usually works on 450/550s, that being said the oil change intervals on newer vehicles are going up and up. I like the idea of greasing components and doing a visual inspection at half the oil change interval. So for me I run a 6K mile oil change interval. At 3K or there abouts, I’ll stick my head underneath my truck, inspect everything then grease it. Doesn’t take long.
Why none on F250s? My 15 is sealed. No fittings at all. Planned obsolescence I would guess.
I don’t own a Ford truck I own a Honda Pilot I am curious if they are sealed. 🙂
Let’s talk about those air horns though. Possibly the worst placement ever to get filled with bugs mud rocks water.
🤷♂️
What is the difference between the Motorcraft XG-1-E1 and the XG-1-C they are both Premium Long Life Grease. The XG-1-C was all that I saw on Amazon
One i think i a Canadian market grease only
We hear a lot warning against using incompatible grease. I use Red And Tacky on most everything. Grease is cheap, parts are not. Do you think that any grease is better than no grease? How concerned should we be about the type of grease we use?
Any grease is better than no grease
So, just how important is it to use a compatible grease?
Great question. I’d like to know too. I also use Red-n-tacky on everything except my boat trailer wheel bearings. I use Lucas marine grease for those.
I have heard that mixing grease types can break down the grease, but don’t know if that myth or fact.
ARod???
Do u have experience with Road Force wheel Balancer?
Does your dealership have one?
Opinion on using it on 19.5?
Not for 19.5s. No longer with that organization
Is there grease fittings on the rear of a 2022 f250 tremor or just front ? Thanks
Just 4x4 front shafts
@@PowerStrokeTechTalkwARod thank u my good man
She only likes grease in the back end
Grease up the deere lol. I have the m18 check. I put on a LockNLube Grease Gun Coupler. I never want to use a grease gun without one.
Can’t get to some fittings with it.
@@akbychoicei have the same setup and theres adapters for when you need to reach weird places/angles.
Aaron good day I have 2023 f350 6.7 high out put only has 500 miles and the check engine light is on I drive it to work and back run erens around town what is up with this thing iam bring it to the deal hopefully tomorrow not a good sign I
U have connected vehicle data..we can look all that info up
@@PowerStrokeTechTalkwARod were is your shop
Detroit
@powerstroketechtalk my dealer sold me XG-11 Is that ok?
Thatll work
My understanding is XG-11 is lithium based, whereas XG-1 is moly. Moly is supposed to be more slippery. Which one is correct for greasing the F350 wheel axle zerk?
Not one grease point on my Ram HD 2500
Whaaaaaa
And your front axle spins all the time, unlike ford has hubs that let the front axle stay still in 2wd.
@@PowerStrokeTechTalkwARod yeah I know no point on front driveshaft double cardon joint either cahrazy.
@@scha0786 ikr
Trade that thing in for an aluma duty, it’s where it’s at. Especially that they now offer a cp4 replacement, they are bullet proof.
Why doesn’t my 2016 250 have zerks? Shame on ford.
Should always clean your nipples before you start lol, does anyone make good replacement dust boots, I have an 06 f250, all the dust boots are starting to crack but the steering components are in great shape, thanks for the video 👍😁
LUMAX LX-1458 Silver Rubber Grease Fitting Cap, (Pack of 5). Grease Fittings Caps Keep Grease Fittings Clean to Help Protect The Fitting Against Dirt, Moisture and Contamination.
Do 21 F250 4x4’s have grease fittings? My ford dealership said no???? I do have that squeaking sound when I engage my 4 wheel drive. I think unrelated but my dealership lacks IMO.