Amazing work!! You know what's next... remember the Kyosho Hang On Rider RC motorcycles? Now we need a dynamic moveable driver on board, super light, 1 servo in a y cable for steering channel. I'm buying the files now and will design a pilot and share it with ya.
Sourcing of the parts is very location-dependent and also some sellers change with time, so I don't have many links. Just a few random ones you might have luck with: www.veryseal.com/product/5x15x6-viton-oil-seal-fkm-metric-tc-oil-seal/?v=f0aa03aaca95 www.123bearing.eu/seals-OA-5X15X6-FPM www.123bearing.eu/bearing-housing/deep-groove-bearing/single-row/s695-zz-inox www.123bearing.eu/bearings-S635-ZZ-ZEN www.ebay.de/itm/353827460993?var=623198168421
The M-Jet 35 would probably fit well, just with some modification to the pump housing. I said in the facebook group, that if anyone gives me exact dimensions or model of the Jetstream hull, I will try to mount the 35 there
@@trochtydust696 Connect the sillicone watercooling pipes from inlet (pressurized water from the jet pump) to the motor, then from motor to ESC, then from ESC into the outlet away from the boat.
@@trochtydust696 You need to glue brass pipes into the slots in Valkyrie hull rear. It's the same process as in this video 11:51 ua-cam.com/video/00WD8rOqKGE/v-deo.html
I used the same motor as in my 4G Hull build - 3670 1200kv on 6s 2600mAh. But the Valkyrie (respectively the M-Jet 35) is compatible with up to 4080 motors. There is a lot more information to motor selection in the M-Jet 35 manual: drive.google.com/file/d/1d3b9momWcgAeUAn5o1v0-QZcIMYy4U90/view?usp=sharing
Has anyone in the states built one of these, got most of the parts made but sourcing some of the parts has been a pain and expensive. I paided $15 for each oil seal and bearings are a oddball size.
Its hard for me to give advice since I am in Europe, but you might get better responses from US people if you ask in the facebook group: facebook.com/groups/623045356071128
@@hjl4004 I am not planning to do so. The M-Jet 35 is better in every way, going back to M-Jet 30 would be a considerable downgrade. But of course you can try to modify the Valkyrie's hull for yourself.
Nice job on the jet ski by any chance are you gonna lower the price on the m jet sprint jet because where I live it. Is double the price or do you get the jet ski with its amazing work good job
Hi, at the moment I am not planning to decrease the price for any of the M-Jet designs. The prices should be as following: M-Jet 30 - 10$ M-Jet 60 - 10$ M-Jet Sprint - 27$ M-Jet 35 - 60$ If the prices are higher in your country, I cannot do anything about it.
V případě, že se šrouby nebudou opakovaně vyšroubovávat a zašroubovávat, není vůbec žádný problém dát je do plastu - pevnost je skoro stejná: ua-cam.com/video/iR6OBlSzp7I/v-deo.htmlsi=VB8wKfpj0n4_FN6y (5:39) Výhoda insertů je spíš, že se při opakované demontáži neopotřebí.
Get your Valkyrie:
www.cgtrader.com/free-3d-print-models/hobby-diy/other/valkyrie-3d-printable-rc-jetski
needs more views man good stuff
Great job on this project i appreciate it
Amazing work!! You know what's next... remember the Kyosho Hang On Rider RC motorcycles? Now we need a dynamic moveable driver on board, super light, 1 servo in a y cable for steering channel. I'm buying the files now and will design a pilot and share it with ya.
Wow, I am interested how that will go!
Love it! What a awesome job you did on building it!
Super cool! Your work is fantastic.
The screwed hull is very clever 👍🏻
Glad you like it. For me, it partially made this assembly even simplier than the M-Jet Sprint:)
@@mjetdevelopment yeah and stronger. Hope you’ll do the same on the Rigid Inflatable Boat 😉🤣🤣🤣🤣🤣
@@jclight5361 You are really making sure I wont forget😂
Great job~
Votre travail en collaboration à donner quelques d'incroyables ! Ça m'inspire beaucoup. Et bonne chance pour ta formation en mécanique.
Thanks for your kind words:)
Super cool!
Got mine built and tested. Just some bugs to work out. It was a fun build. Once I'm done with Facebook jail I'll post there.
full send barbie veichle this is! hehe, this is for shure a future buy/print for me!
Will the nitro seat fit on the electric chassis? I don't have a large enough bed to print the tpu cover , thanks
It does not. What printer size do you have? I am thinking about a solution for smaller printers, not sure if it will be successful yet.
@@mjetdevelopment 220x220
@mjetdevlopement do you have any links to order the parts like o ring seal brass insert…
Sourcing of the parts is very location-dependent and also some sellers change with time, so I don't have many links.
Just a few random ones you might have luck with:
www.veryseal.com/product/5x15x6-viton-oil-seal-fkm-metric-tc-oil-seal/?v=f0aa03aaca95
www.123bearing.eu/seals-OA-5X15X6-FPM
www.123bearing.eu/bearing-housing/deep-groove-bearing/single-row/s695-zz-inox
www.123bearing.eu/bearings-S635-ZZ-ZEN
www.ebay.de/itm/353827460993?var=623198168421
You should do an upgraded Jet for the Proboat Jetstream or do you already have a jet that might fit?
The M-Jet 35 would probably fit well, just with some modification to the pump housing. I said in the facebook group, that if anyone gives me exact dimensions or model of the Jetstream hull, I will try to mount the 35 there
@@mjetdevelopment I can send you all the dimensions you need, you want to email or can add you on FB or something?
@@texavon6168 Fantastic. Please just send me a DM, we can discuss everything.
facebook.com/profile.php/?id=100009280841797
@@mjetdevelopment no worries
How am i supposed to install water cooling
@@trochtydust696 Connect the sillicone watercooling pipes from inlet (pressurized water from the jet pump) to the motor, then from motor to ESC, then from ESC into the outlet away from the boat.
But where do i plug the silicone cooling pipes to the motor and esc where are the plugins
@@trochtydust696 You need to glue brass pipes into the slots in Valkyrie hull rear. It's the same process as in this video 11:51
ua-cam.com/video/00WD8rOqKGE/v-deo.html
@@mjetdevelopment where do i conect it to the motor
@@trochtydust696 You need a brushless motor watercooling jacket
Very nice design! What size and kv motor did you use? Battery cells?
I used the same motor as in my 4G Hull build - 3670 1200kv on 6s 2600mAh. But the Valkyrie (respectively the M-Jet 35) is compatible with up to 4080 motors.
There is a lot more information to motor selection in the M-Jet 35 manual:
drive.google.com/file/d/1d3b9momWcgAeUAn5o1v0-QZcIMYy4U90/view?usp=sharing
Has anyone in the states built one of these, got most of the parts made but sourcing some of the parts has been a pain and expensive. I paided $15 for each oil seal and bearings are a oddball size.
Its hard for me to give advice since I am in Europe, but you might get better responses from US people if you ask in the facebook group:
facebook.com/groups/623045356071128
Is this hull also suitable for the M30?
No, these are not compatible.
The Valkyrie has an integrated M-Jet 35 pump housing.
@@mjetdevelopment will you create a m30 version in the future?
@@hjl4004 I am not planning to do so. The M-Jet 35 is better in every way, going back to M-Jet 30 would be a considerable downgrade. But of course you can try to modify the Valkyrie's hull for yourself.
@@mjetdevelopment thank you so much for your designs. Love your content, really mindblowing!
Do you have a direct link of how or where to order the custom metal parts for the drive.
Nice job on the jet ski by any chance are you gonna lower the price on the m jet sprint jet because where I live it. Is double the price or do you get the jet ski with its amazing work good job
Hi, at the moment I am not planning to decrease the price for any of the M-Jet designs. The prices should be as following:
M-Jet 30 - 10$
M-Jet 60 - 10$
M-Jet Sprint - 27$
M-Jet 35 - 60$
If the prices are higher in your country, I cannot do anything about it.
@@mjetdevelopment Alg man you do spend loads of time designing them so I understand
Hey if you don't mind me asking but dose the mjet sprint come with the mold to make a 4g one?
@@baconbulldog5250 The 4G hull mould is free for download:
www.cgtrader.com/free-3d-print-models/hobby-diy/automotive/4g-sprint-hull-for-rc-boats-2022
@@mjetdevelopment Thank you for sending me the link
Best you can get. Proboat is not cheap and needs electronics replaced. Would take the TFL over Proboat any day.
Rád vidím že nejsem jediný kdo ty šrouby šroubuje rovnou do plastu :D
V případě, že se šrouby nebudou opakovaně vyšroubovávat a zašroubovávat, není vůbec žádný problém dát je do plastu - pevnost je skoro stejná:
ua-cam.com/video/iR6OBlSzp7I/v-deo.htmlsi=VB8wKfpj0n4_FN6y (5:39)
Výhoda insertů je spíš, že se při opakované demontáži neopotřebí.