Best way to end the week, a little Wasabi😃. I will definitely try cleaning with this process. the discoloring has def been stressing out my brain.. but you are right, I probably should try to just enjoy it for what it is.
Becouse it removes a tiny layer of the mouse so if you do it over and over youe coating will be gone . Its a ultrasonic cleaner you also us for glasses
I emailed Finalmouse and their recommendation was to clean it with 70%iso. I asked about ruining the coating and they said 70% wouldn't effect the coating.
I just got my ultrasonic cleaner. The same model as yours. The manual says not to put in any alcohol as I can be a fire hazard. I really would like to do it with the 70% IPA but I’m honestly scared. I searched it too and it says not to do it. How is it you did it?
I would recommend not to use anything higher than 70% IPA! The risk of fire should never be taken lightly so if you want to use the same machine, do it at your own risk and please please please be extra careful. Make sure you use it in an area where there are no flammable objects around. Wooden desk and mouse pads have a degree of risk. If you can, place it on a concrete floor. Do it in short cycles with breaks in between because the machine can get hot through long cycles and of course do not leave the machine un attended when its in operation. Also have a fire extinguisher on standby if possible. These are some of my suggestions to prepare for the worst and reduce as much risk as possible.
Imagine paying 189$ just to get a mouse that stains then you have to invest even more money to fix it becouse of course Finalmouse gives a fuck there fanboys buy it anyways and then you pained over your expensive mouse were you payed for the color way 😂 . Like wtf
FInalmouse are the most overpriced generic mices nowadays. The shape won't work for any grip except fingertip yet they are way too big for proper fingertip. Absolutely 0 hump even on bigger models. 35 gramms weight is actually worse for tactical shooters because it gives you more inconsistency factor due to it being way too lightweight. It would be fine if it was priced like WLMouse but it's almost 2x and always sold out. No idea why
Finalmouse is overpriced yes and all the stupid peopl that buy them with all the problems are the bigest problem but no light weight mice arnt worse in tactical fps you just suck at aiming and as soon as all the training wheels are of you struggel to hit anything its not the light weight thats the problem is your own abilitys that are just not good enoth . It comes down to how you grip your mouse as well . But lower weight is better every singel time you just have to train up your stability thats it
@@xythiera7255 If low weight was better objectively we would already have esports area plauged with ultra lightweight mice because it would unlock higher skill tier and pro players definitely can push their devices to their limits. In reality though more than half of them are Superlight1/2 and Zowie 80 gram mices which says a lot about potential benefit of lightweight mice.
@@Lucidaus This is one of the most retarded things I've ever read on the internet and I've been on this mother fucker for almost 30 years. THE ONLY SINGLE REASON they are using Zowie and Logitech mice is because of fucking SPONSORSHIPS. Lower weight mouse is OBJECTIVELY better in every metric. This isn't even up for debate.
Best way to end the week, a little Wasabi😃. I will definitely try cleaning with this process. the discoloring has def been stressing out my brain.. but you are right, I probably should try to just enjoy it for what it is.
The problem with ultrasonic cleaning is you kill your coading over time with it
Did not know it could remove that much of the stain. I’ll try it, thanks!
Becouse it removes a tiny layer of the mouse so if you do it over and over youe coating will be gone . Its a ultrasonic cleaner you also us for glasses
Doing what Finalmouse was gonna do. GG. Good stuff man :)
How clean does it get? Can we get a before and after? Mines turning yellowing its getting annoying. Need to know if this really works!
does the 70% iso affect the coating at all? lets say after a few cleanings do you think the coating will still be okay?
I emailed Finalmouse and their recommendation was to clean it with 70%iso. I asked about ruining the coating and they said 70% wouldn't effect the coating.
@@dohnuts4405 howd that work for you
@@dohnuts4405It will over time dont trust finalmouse for shit . You shoud us it as little as possibel .
@@dohnuts4405 ISO 70% is isopropyl alcohol 70%? Thank you
@@parloca13yes
You're the best!
Hi what pen did you use I plan on making mine black?
Do i have to close the lid while cleaning?
I just got my ultrasonic cleaner. The same model as yours. The manual says not to put in any alcohol as I can be a fire hazard. I really would like to do it with the 70% IPA but I’m honestly scared. I searched it too and it says not to do it. How is it you did it?
I would recommend not to use anything higher than 70% IPA! The risk of fire should never be taken lightly so if you want to use the same machine, do it at your own risk and please please please be extra careful. Make sure you use it in an area where there are no flammable objects around. Wooden desk and mouse pads have a degree of risk. If you can, place it on a concrete floor. Do it in short cycles with breaks in between because the machine can get hot through long cycles and of course do not leave the machine un attended when its in operation. Also have a fire extinguisher on standby if possible. These are some of my suggestions to prepare for the worst and reduce as much risk as possible.
gonna put my batteries in the ultrasonic cleaner to get the ghosts out
where i buy this ultrasonic cleaner :3? Amazon/aliexpress?
Its a standart one you also us for glasses but its a bandate fix it will stain again and it removes your coading as well over time
@@xythiera7255yes it will continue to stain, but iso 70% will not affect the coating in any negative ways
W Video
Ultrasonic Cleaner tm
By by coating
Imagine paying 189$ just to get a mouse that stains then you have to invest even more money to fix it becouse of course Finalmouse gives a fuck there fanboys buy it anyways and then you pained over your expensive mouse were you payed for the color way 😂 . Like wtf
FInalmouse are the most overpriced generic mices nowadays. The shape won't work for any grip except fingertip yet they are way too big for proper fingertip. Absolutely 0 hump even on bigger models. 35 gramms weight is actually worse for tactical shooters because it gives you more inconsistency factor due to it being way too lightweight. It would be fine if it was priced like WLMouse but it's almost 2x and always sold out. No idea why
what a take... wrong but still
So wrong. Goodluck tho.
Finalmouse is overpriced yes and all the stupid peopl that buy them with all the problems are the bigest problem but no light weight mice arnt worse in tactical fps you just suck at aiming and as soon as all the training wheels are of you struggel to hit anything its not the light weight thats the problem is your own abilitys that are just not good enoth . It comes down to how you grip your mouse as well . But lower weight is better every singel time you just have to train up your stability thats it
@@xythiera7255 If low weight was better objectively we would already have esports area plauged with ultra lightweight mice because it would unlock higher skill tier and pro players definitely can push their devices to their limits. In reality though more than half of them are Superlight1/2 and Zowie 80 gram mices which says a lot about potential benefit of lightweight mice.
@@Lucidaus This is one of the most retarded things I've ever read on the internet and I've been on this mother fucker for almost 30 years.
THE ONLY SINGLE REASON they are using Zowie and Logitech mice is because of fucking SPONSORSHIPS.
Lower weight mouse is OBJECTIVELY better in every metric. This isn't even up for debate.