Nissan Qashqai Front Suspension Rattle
Вставка
- Опубліковано 19 тра 2017
- This Nissan Qashqai came in with a massive rattle from the front end over rough roads. Rob shows you what he found.
Want a set of those Ultra Thin Spanners?
My Amazon shop is now open where I have shared the tools I use in my videos and other cool stuff I can recommend.
amazon.co.uk/shop/oneauto
(I make a very small commission from anything purchased)
Thanks for your support!!
Instagram: @oneauto.youtube
/ oneautogarage
ko-fi.com/oneauto
Please watch the other videos on the channel. / oneauto
and subscribe to keep up to date with the latest uploads.
This video is for entertainment purposes only.
Thomas EXOVCDS channel:
/ @exovcds
Badgertronix channel:
/ @badgertronix
Music by Jordyn Edmonds:
/ jordynedmonds - Авто та транспорт
![[EN] Nissan Qashqai Front Suspension Inspection and Repair.](http://i.ytimg.com/vi/GNxJHvhcc5c/mqdefault.jpg)
![[EN] Nissan Qashqai Front Suspension Inspection and Repair.](/img/tr.png)
Just bought a new Qashqai and loving it so far. Now I know why they’re number 1 in the UK........good value for the money and pretty easy to work on. I like mine because it’s made in Japan!
I had a rattle coming up through my steering wheel (2013 Qashqai Ti) at low speed traveling over things like cobblestones. Replaced both front sway bar links; sway bar centre bush; both front shocks.
Finally conquered it with a new right tie rod end. Now steers and handles like a new one.
Brilliant work mate! Love your work........
great work as normal mate wish i had the patients to work and record like you. your helping thousands thanks.
Thanks Steven, I enjoy it, but don't always have the time to record stuff. Just sharing the knowledge 👍
sounds about like my joints now a days! Nice job Rob!
Cheers Mike.. yep I know that feeling too well 😂
Bodgit and legit garage viewer here sent over by Leon. You have some good videos on your channel. On my way to watching them all, cheers
Thanks man! Leon's a top fella 👍
fancy spanners. Good looking tool box and nice work as always. Thanks for the shout out 😎
Well worth looking out for them spanners. What will Charlie make of all this when he's older! How the hell you gonna explain his fame 😂 cheers mate 👍
Great video again Rob had to sort my noisey suspension out today was the lovley drop links
Cool, nice one!
yes as buddget and legget garage said you are a great man, great channel and great videos.
keep going my freind.
Thanks!
Excellent vid 👍🏻
You do a really good job on your videos. I come to watch even if I know how to do the repair. I can always pick up on a tip or two. Nice work Rob, and oh yeah. No tool box is complete without a Charlie sticker!
Thanks Wyatt, you know about Charlie only too well 😂
I still smile when I think of opening that box. I was confused but it was fun.
I'm glad u know. Changing the bulbs is as far as I go. Lol
Great job mate!
Time for a brewskie now!
Eric O sent me! You must be good ;) Looking forward to a binge once my little one is asleep :)
Eric is very kind. Welcome and enjoy 😊
Funny... I had to replace a couple of links this past week as well. "Qashqai" wouldn't last long in North America... Cash-Cow would be the nickname once too many repairs started to surface! =)
Oh and thanks for the shout-out! Charlie looks good on the cart! Cheers
Haha reminds me of those nudge bars that used to be fitted to the front of 4x4's, I used to call them 'Cow Catchers' :) Cheers mate 🍻
Thumbs up rob great video again
Cheers Andrew 👍
Aha! First one here 😛 Looks pretty easy Rob and those wrenches look nice 👍
Such a bad noise when they've gone, like the front ends falling off, yet an easy fix. Cheers Terry 🍻
Great vid, I had a go at the one on my wifes car, and my god the bottom nuts were seized solid, I was almost at the point of disc cutting 1 off.
Nice one Rob , just my kind of job nice and easy 👍
That's how we like it!
Charlie hahahaha awesome. Their handy are they , took me a second there to catch on. Top Notch Rob.
Cheers Steve. Charlie is clocking up some air miles for such a young lad 😂
Good work great video !
Cheers Norm 🍻
Enjoyed the SMA Sticker On your cart. Eric O. sent me in your direction!!!
Hi Jeremy, thanks for stopping by. Eric is a top bloke!
Great vid mate
Cheers
Jamie
Cheers Jamie 🍻
Thanks :)
What should l do I have changed ball joints tie ends but still there is a big noise under
Hi how much would this cost to do in a garage I have the same issue on my qashqai 2010 model
Hi Rob are you in the UK or USA i saw you doing a favour for ERIC O then i see you working on right hand drive vehicles i don't know if i am coming or going.lol
Subscribing from SMA, this looks like the European version!
Iv got 66 plate Doing the same thing. Definitely handing this car back has loads of faults won’t be getting another Nissan again. Had a bmw 120d for 7 years not one issue.
Nice one Rob.
Nice ultra thin spanners. I ground down a bunch of my dads old Halfords ones for those sorts of jobs the last few years... He still complains about it. 😂
How often does that half inch beast you have refuse to shift a rusty bolt Rob? I've had a cheap Ryobi half inch impact the last few years. I can't really complain for what i paid but a lot of the old beat up rusty crap i work on i find myself resorting to a breaker bar. I noticed quite a few of these mega powerful half inch battery impacts popping up and I'm tempted...
Mate the impact is an animal!! Check it out on ACS website, get one then learn how to handle the power! 😂
If you squirt CRC etc into the thread before tightening,they will be easier to remove next time,same applies to all underbody threads especially where roads are salted for ice.
Do the wheels need to be off the ground ? Is it normally the bottom joint that goes or can the top that joins the suspension leg show signs ?
Mark Shenton either joint can wear. Probably best diagnosed with the wheels on the ground (in their normal position) if you can crawl underneath or on a four post lift. These were so bad the movement showed up with the wheels off the ground
Ah, this would explain the noise on my Qashqai! Thanks! And my Mrs said you're cute.
You’re welcome and say hi to your Mrs 😊
As soon as she's finished shaving her back. Cheers.
Anonanon 🤣😂
Hi Rob... I am from Singapore...my Quashai is having this knocking sounds when i go over a hump..the mechanic already changed the links and the rubber bushings and also the front shocks but the sound is still there.... Now he suggested to change the lower arms. What do you think is the issue. I cannot go to do too much trials and errors.
Hi Peter, thanks for watching. By the sounds of it I think you need to change your mechanic. Sorry I can’t be there to help. Good luck
The Charlie stickers are great lol he's famous now
I know I wonder what he'll think of it when he's older :)
What about a knock when you steer the wheel left & right, track rod end(s)?
Well thats different altogether, could be track rod ends, inner track rods, steering rack, ball joints, strut mounts. It would need checking out.
I worked at a nissan dealer for 5 years and changed hundreds of those links they are junk. Looks very similar to the Sentra, Rogue, and Altima here in Canada
Yeah it's like if I had a penny for every link I've ever changed.....
Do you need to Jack both sides up at the same time? Going to need to replace them on my Renault Captur
No you can do one at a time
@@OneAuto cheers mate!
What is the name of the part that you've changed please?
Anti roll bar linkage. 👍
Was that a 1/4'' drive flex head ratchet, Rob?
3/8" drive flex head 👍
Oh yes I see now----the omnipresent 3/8'' drive locking flex head that you use on everything. I couldn't tell initially because the locking lever was facing from us away towards the car. I could swear I've seen you use a 1/4'' drive flex head in one of your videos though.
Hi if somebody has fitted one upside down what's happens?
Neil CAUNTER should be the same either way up. Side to side they are different
Many thanks, I’ve just changed the nearside one along with the lower suspension arm, but now the steering wheel seems slightly off the 9-3 position and I wondered if I’d fitted the anti roll link upside down or something equally as silly.
Oh ok. If you have changed the lower arm then you now need to get the wheel alignment done to straighten the steering wheel.
"probably one of the easiest suspension jobs you can do on your car" Until you get a rusty one with a 30 torx to counter hold it 😂
Yeh get the hot torch out 👍
I usually tighten them and hope they snap😉
I got the Angle Grinder out for a Yaris I had to do recently
Yep that's plan C 👍
Super Video gibs das auch auf deutsch
Nice to get the easier jobs once in a while.
Yes no heat required 🍻
Nissan never again to many unsolved problems and to many excuses from dealers.
Suspension still not sorted on newer qashqais. The worst suspension I've ever driven.
you have hair.....lol.....more than Bodge it n leg it lol
Haha it's not the colour it used to be but it's all there 😂