Well sick mate! Absolutely nailing those wheelies. Also really well explained in this video and your presentation skills are excellent. Would be great to see more tutorial-type stuff from you mate. Keep going.
I really appreciate you checking out my new video and thank you so much mate, I am super happy with how the tutorial came out and I definitely want to do some more talking to camera videos! 🎥🙌
Spot on guide, and well done! I used to be good at wheelies on analog bikes and even wheelchairs, but have not done it on an e-bike... at least not on purpose! When I did the controller change on my particular bike, it would pull the front wheel off the ground on startup, and I had to learn how to keep that under control. I had no desire for wheelies with that setup because the controller had a throttle delay, but now that I changed the system over to one with instant throttle response, I may give it a go.
That was one of the greatest video tutorials I have ever seen!! Your tutorials are just amazing. From step to step everything is just explained perfectly.I would love as a 13 year old to have a e-bike like this to practice wheelies
Thanks so much for watching my video! Cheers for the feedback too, but if you would like to remove your brake sensor then just follow the cable back from the brake lever to find the plug around 10cm down the cable and then unplug it but they can be stiff so don’t be worried to pull on them hard! I hope that helps ⚡️
I’ve got the zx, with throttle, I noticed the brake sensor is really annoying. Ok now I will try unplugging the cable from the sensor. Great video. Subscribed 👍
I really appreciate you watching my video! To unlock the bike you do not need to cut any wires, all you need to do is download the Super 73 app and put the bike into mode 4 power which unlocks 2000 watts and then you need to follow the small electrical cable back from the rear brake lever and unplug the sensor and then you can wheelie the bike 🤙🔥⚡️🤘
On my z adventure I disconnected my rear brakes and it works fine but I don’t really know how to pop it up while feet on pedals, I tried sitting at the very back and pushing down on my suspension and up but it only pops up a little how do I make it go higher
Full throttle all the way? Thats asking too loop for sure even when the rear brake is apply, so what happens when u release the rear brake while your hand is still on full throttle? Thats a huge loop with a whiskey throttle
Thank you so much for watching my tutorial! I really can’t wait to hear how it helps you learn the wheelies! To remove the rear brake sensor, if you go to your rear break leaver you’ll see there is a big hydraulic cable and little electrical cable and if you follow the electric cable back you will see it goes to a plug near where the light is and if you unplug it, you have then disconnected your rear brake sensor. I hope that helps 🤘
@@aidandaly8270 There are multiple connectors near the break sensor cable. It sounds like you have unplugged the Screens cable instead. Double check and let me know :)
Awesome video! Not sure if its different in the EU, but my US RX has the rear brake on the right hand, same hand as the throttle. Do you think its possible to control both throttle and rear brake with one hand, or will it be necessary to switch the brake to the left hand? Thank you!
Thank you so much for checking out my video and even though I am sure it is possible to wheelie in the break configuration that you have, I would recommend you switch the brakes around as it’s a lot easier as then you only have one task to do per hand instead of trying to hold down the throttle and motivate the break with just one hand on your set up. I really hope that helps!
@@YoungFilmmaker how do you flip the brakes? I tried just literally flip flopping the entire assembly but this causes the hydraulic reservoirs to be upside down and therefore prevents them from functioning. That means the cables have to be swapped, but I'm scared this will require having to bleed the lines. If you swap the hydraulic brake lines, doesn't that break the seal of the oil in the lines?
how do i change the left brake to be the rear brake? i find it a little hard to try to lift up the front wheel while holding onto the throttle and brake
the video we all been waiting for. DMX would be proud
So glad you found my video useful!! 🙌
The quality of this video is insanely high. Don’t ever comment about that, but man you’re good at this.
Well sick mate! Absolutely nailing those wheelies. Also really well explained in this video and your presentation skills are excellent. Would be great to see more tutorial-type stuff from you mate. Keep going.
I really appreciate you checking out my new video and thank you so much mate, I am super happy with how the tutorial came out and I definitely want to do some more talking to camera videos! 🎥🙌
Spot on guide, and well done! I used to be good at wheelies on analog bikes and even wheelchairs, but have not done it on an e-bike... at least not on purpose! When I did the controller change on my particular bike, it would pull the front wheel off the ground on startup, and I had to learn how to keep that under control. I had no desire for wheelies with that setup because the controller had a throttle delay, but now that I changed the system over to one with instant throttle response, I may give it a go.
I really appreciate you checking out my tutorial!
Such a wonderful teacher! Thank you ❤️❤️❤️
I just tried today and crashed hahaha 😂 never giving up tho 💪💀
Really helped me wheelie my s2. Thank you man!
Awesome! Stoked to hear that!!
Is rear brake on the left on an s2?
That was one of the greatest video tutorials I have ever seen!! Your tutorials are just amazing. From step to step everything is just explained perfectly.I would love as a 13 year old to have a e-bike like this to practice wheelies
Thank you so much for your kind words - it really means a lot to me and I hope it inspires more people to learn how to wheelie 🙌⚡️
Hi I have an S2 and I was wondering if you could tell me how to disconnect the sensor. And great vid
How is your back break on the left
Would have been nice to see how you removed the sensor. Epic video!
Thanks so much for watching my video! Cheers for the feedback too, but if you would like to remove your brake sensor then just follow the cable back from the brake lever to find the plug around 10cm down the cable and then unplug it but they can be stiff so don’t be worried to pull on them hard! I hope that helps ⚡️
@@YoungFilmmaker Awesome! Thank you so much :)
@@YoungFilmmakerio ho un M20 si fanno bene anche su quella le impennate? pultroppo non è una super 73 originale 😢
I’ve got the zx, with throttle, I noticed the brake sensor is really annoying. Ok now I will try unplugging the cable from the sensor. Great video. Subscribed 👍
MY friend has a zx so much easier to wheelie then my rx but I’m not giving up lol
I love it so much
Thanks 🙌🔥🙌
can you make a tutorial on how to disconnect your rear brake sensor
Awesome sauce, great video job well done 👏🏼 nice tips and tricks 🤟🏼
Thank you bro!! I really appreciate the kind words and keep up your great videos too! 🎥🙌
Yes Luke!! 👌🏻👌🏻
Thanks dude!! 😎
Very informative and helpful.
Thank you so much for watching my video! 🤙🎥
How do I disconnect my rear brake sensor?
Look there are 2 wires connected to ur rear brake find the sensor and just disconnect it
Do you need to unlock the bike or something to do wheelies? Been hearing there is a wire to cut that makes the bike unlimited
I really appreciate you watching my video! To unlock the bike you do not need to cut any wires, all you need to do is download the Super 73 app and put the bike into mode 4 power which unlocks 2000 watts and then you need to follow the small electrical cable back from the rear brake lever and unplug the sensor and then you can wheelie the bike 🤙🔥⚡️🤘
Nice!
Thank you!! 🙌
Well done 👍🏻
I really appreciate that! ⚡️
Awesome!
Is it possible to wheelie the super 73 s adventure?
Is a super 73 a dual motor ebike, like does it have a motor in the front and back
On my z adventure I disconnected my rear brakes and it works fine but I don’t really know how to pop it up while feet on pedals, I tried sitting at the very back and pushing down on my suspension and up but it only pops up a little how do I make it go higher
How do I cut my rear break sensor
can you wheelie the z1 or z1 miami?
After my neighbor was doing wheelies on his super 73 the front forks are damaged after 2 months of owning it.
can you do this on a s1?
could i wheelie a freego f3pro? (search it up)
Full throttle all the way? Thats asking too loop for sure even when the rear brake is apply, so what happens when u release the rear brake while your hand is still on full throttle? Thats a huge loop with a whiskey throttle
These bikes on full power do not have enough power to lift the front wheel, you need full power as the motor does not deliver much torque.
how much does this weight
can i wheelie a ZG?
What cable is the break sensor on the s73 zx?
i have the same question i wish someone would answer that.
It’s like red follow it to your brake
@@jacobdedek8406 Thanks but I got a surron now
@@xifyy4700 damn nice I want a surron so bas
@@jacobdedek8406 It’s not all that I lowkey stopped riding mine
5:12 throttle is pedal?
5:37 eu Super73 don’t come with a throttle?!?
I am in Europe like you! Where I can buy a throttle???
how much pedal assist ?
Song name
This is awesome thanks! How do we actually disengage the rear brake sensor?
Thank you so much for watching my tutorial! I really can’t wait to hear how it helps you learn the wheelies! To remove the rear brake sensor, if you go to your rear break leaver you’ll see there is a big hydraulic cable and little electrical cable and if you follow the electric cable back you will see it goes to a plug near where the light is and if you unplug it, you have then disconnected your rear brake sensor. I hope that helps 🤘
@@YoungFilmmaker i just took it off by pulling super hard and now the circle screen won’t turn on and i’m unable to use the bike
@@aidandaly8270 There are multiple connectors near the break sensor cable. It sounds like you have unplugged the Screens cable instead. Double check and let me know :)
bro song name pls
Can you wheelie phatfours too?
Awesome video! Not sure if its different in the EU, but my US RX has the rear brake on the right hand, same hand as the throttle. Do you think its possible to control both throttle and rear brake with one hand, or will it be necessary to switch the brake to the left hand? Thank you!
Thank you so much for checking out my video and even though I am sure it is possible to wheelie in the break configuration that you have, I would recommend you switch the brakes around as it’s a lot easier as then you only have one task to do per hand instead of trying to hold down the throttle and motivate the break with just one hand on your set up. I really hope that helps!
@@YoungFilmmaker makes sense, thank you!
@@YoungFilmmaker how do you flip the brakes? I tried just literally flip flopping the entire assembly but this causes the hydraulic reservoirs to be upside down and therefore prevents them from functioning. That means the cables have to be swapped, but I'm scared this will require having to bleed the lines. If you swap the hydraulic brake lines, doesn't that break the seal of the oil in the lines?
do you keep pressing the throttle when wheeling? because when I try wheeling I go too fast and cant manage balance too well☹
I cant even lift it up at all😭
how do i change the left brake to be the rear brake? i find it a little hard to try to lift up the front wheel while holding onto the throttle and brake
Yea same here pls help us
i dont think you can without taking it in to a shop the wires from each break are routed to the proper wheel you would need to change them
no thanks
where is the brake sensor wire and how do i disconnect it
is there any torque upgrades