Hey the ranger raptor looks so good with the strut spacers done and tiarna is a good helper with the job needed done stay positive and shibby guys look out for your fingers doing improvements 👍😁🌹❤️🇦🇺👍
What's a Luke fink vlog without body damage and was thinking you've spent to much time in America and went squatter truck on us but you saved yourself at the end. Nice work 🤙🇦🇺🍻
I did this a couple weeks ago, and it's not like this helps now. But in future, I Unbolted the inner lower control arm bolts, whilst holding them tight with a ratchet strap, and it'll make your life a whole lot easier. Only issue I had was aligning my camber plates on the ICA bolts.
I commend you for doing such awesome work on that cobble cement driveway. that stuff really takes it out of you. working on smooth concrete, and working on the rocky stuff like you have there is actually a crazy difference. i recently moved from 1 house with the driveway cobble like you have, to a place with smooth concrete and i can spend so much more time on the ground without being super fatigued. for some reason the cobble stone driveway took ALOT out of me. it hurt my knees, my back, all of my joints i would spend like 30 minutes under my car and just come out EXHAUSTED. i move and i can spend hours under the car no problem.
It's common in dealaships to do an oil and filter change and put them back out with out checking anything else, it's the quick easy money Specially on new cars
@lukefink as I watched I knew what was up. Those spacers didn't even look like half an inch and I had no idea fox and ford did a collab for the coils. Those are beautiful !
I was tempted to get strut spacers for my hilux and everyone told me they're dangerous and ruin steering geometry bla bla bla. Definitely let us know how it drives once youve got the alignment done
As a flat rate mechanic I've measured lots of brakes without taking wheels off. I use a flexible sort of feeler gauge. Just depends on the wheel and caliper/braket designs allowing me to get in there with it.
@@Lukefink the short answer is I may depending on circumstance. But being in a different country and having worked for manufacturers that aren't Ford those circumstances probably aren't the case for you.
I work for a dealership if they don't have to they won't they'll do anything they can to not lose money that's just part of buying at a dealership I plan on having a dealership of my own one day to where everyone is taken care of no matter what to honor every stipulation of every warranty. Hate that you're going through that bro I wish there was something I could do I've only been a salesman for four and a half months but I plan on changing the game.
You might not have to but with the upper control arm looks like its on a mad angle i think you can get extended ball joints or longer control arm just to take some of the angle out so its sits abit flatter
I would be taking it to another dealer and starting fresh with a new service manager who gives a damn about customer service, but this is Ford we are talking about haha
Ah I broke a nail, don't kick the nuts, see now you kicked the nuts get on your hands in knees, I have no clue what I'm doing, damn I don't want to wreak my shirt, Lady's love an extra inch, there is literally Blood everywhere, I don't like working on cars, now my nail is still wonky haha you 2 are great I could watch the both of you all day great great content as always o it's like a Art piece I sliced my damn finger and you laughed haha 😄
Dealerships never do what they say. I left the industry because its fucking sad how they treat customers. I was always pushed to rush shit instead of doing it correctly.
@@SHOCKcustoms ill wait for gen 2 of it so they can work out the bugs! I saw one had burnt to the ground the other day so ill take my time 😄 this ones only just clicked over 20k kmz
bro i had mice in my car recently i washed the engine bay with degreaser and then sprayed it with peppermint oil in water and i put rat sak around my car and they are gone now man if you still have problems
Looks great! Hoping to get a lift in my car this year.
Hey the ranger raptor looks so good with the strut spacers done and tiarna is a good helper with the job needed done stay positive and shibby guys look out for your fingers doing improvements 👍😁🌹❤️🇦🇺👍
You guys are awesome!
Happy new year to the Fink family! 🍺
Much love finks . Happy new year . 🤍🔥🤘
What's a Luke fink vlog without body damage and was thinking you've spent to much time in America and went squatter truck on us but you saved yourself at the end. Nice work 🤙🇦🇺🍻
"It's, like an art thing!" 🤣😂🤣😂
I did this a couple weeks ago, and it's not like this helps now. But in future, I Unbolted the inner lower control arm bolts, whilst holding them tight with a ratchet strap, and it'll make your life a whole lot easier. Only issue I had was aligning my camber plates on the ICA bolts.
T with her buccees umbrella 🤣 😜 Raptor looks great brother. ✌️
I commend you for doing such awesome work on that cobble cement driveway. that stuff really takes it out of you.
working on smooth concrete, and working on the rocky stuff like you have there is actually a crazy difference.
i recently moved from 1 house with the driveway cobble like you have, to a place with smooth concrete and i can spend so much more time on the ground
without being super fatigued. for some reason the cobble stone driveway took ALOT out of me. it hurt my knees, my back, all of my joints
i would spend like 30 minutes under my car and just come out EXHAUSTED.
i move and i can spend hours under the car no problem.
Yeh we are planning on getting it grinded
Sick to hear that your heading to Summernats. Can’t wait to see them videos
🤣 at Luke being sad that T laughin at him bout his bloody gash
Truly a cultured man, bringing up the Carolina Squat haha! Good vlog man!
Happy new year Luke and family.🤙
It's common in dealaships to do an oil and filter change and put them back out with out checking anything else, it's the quick easy money Specially on new cars
Happy new years 🤙
T is the best...
Yeah she's just perfekt 👍
I had strut spacers in my older ram and I must say it was worth it in the end just to replace the puck with a spring.
Mine already has a spring lift and shock revalve
@lukefink as I watched I knew what was up. Those spacers didn't even look like half an inch and I had no idea fox and ford did a collab for the coils. Those are beautiful !
Hey guy's glad yall made it back safely and HAPPY HOLIDAYS
Happy New year too you both and family 😎🎉✨️💛.
Happy new years brother and miss fink keep on going bro
hey man i cant wait till you got 1mil subs.. everyone needs to see them drifting skills :D
So the telecom company used to use coax cable that was made with peanut oil. So probably the wires in your raptor were made with the same process.
I was tempted to get strut spacers for my hilux and everyone told me they're dangerous and ruin steering geometry bla bla bla. Definitely let us know how it drives once youve got the alignment done
Feels mint
I'm sorry but unless you are going like 3-4 inches of lift that's not funny true
You and the wife are like me and the misses, she always laughs when me or anyone else gets hurt.
I called ford with your number plate and got the paint code a few months back and painted my gu patrol the same colour as your raptor 😂👌
I flicked you a few photos on Facebook
Hell yeh
9:40 peep wills favorite tool in that drawer CRESCENT WRENCH 😂😂
You deserve a Gen 2 raptor with the V6
You need 1 of those signs to count days Luke doesn't hurt HIMSELF 🥴🤔🤙
As a flat rate mechanic I've measured lots of brakes without taking wheels off. I use a flexible sort of feeler gauge. Just depends on the wheel and caliper/braket designs allowing me to get in there with it.
Would you bother doing that though if part of your job was to rotate the tires aswell?
@@Lukefink the short answer is I may depending on circumstance. But being in a different country and having worked for manufacturers that aren't Ford those circumstances probably aren't the case for you.
I work for a dealership if they don't have to they won't they'll do anything they can to not lose money that's just part of buying at a dealership I plan on having a dealership of my own one day to where everyone is taken care of no matter what to honor every stipulation of every warranty. Hate that you're going through that bro I wish there was something I could do I've only been a salesman for four and a half months but I plan on changing the game.
But I love you guys so much one day I hope we drift
Happy New Year Luke and T! Always a fun video when you include wifey!
An art piece 🤣🤣🤣🤣🤣🤣🤣
You might not have to but with the upper control arm looks like its on a mad angle i think you can get extended ball joints or longer control arm just to take some of the angle out so its sits abit flatter
No need for raptor it doesnt foul on naything
@lukefink too easy mate 👌
Nick couldn’t help you save your finger? 😅
Motivatin
Peep that whiskey garage tee 🤙🏽🤙🏽🤙🏽
Happy new year 🎉 370z engine replacement coming soon 🤙
How good are those falkens!!!! Iv ran them for years now they do well
Might see you at Summernats! Love having it 5 mins from Home! Are you bringing a car down?
No car this year
Did you have to rotate the strut 180 degrees when putting it back in ? Or did you move the top of strut ? Thanks
Good to See you do your own stunts.... # thumb 👍
Hey mate, Have same raptor, Have done springs and mikes shock shop...What are your thoughts with putting in new UCA's to correct the angles?
i havent found any issues with handelling to warrant needing them tbh
Finally Avatar is doing some work
Hey. Where Can i get the front Blue springs? Here in Eu we Can get only for rear.
Thx
Great work. One question. How do you rotate the upper end to fit the holes on the mounting?
not easy but turning it with any sort of leverage is the goer
I would be taking it to another dealer and starting fresh with a new service manager who gives a damn about customer service, but this is Ford we are talking about haha
Ah I broke a nail, don't kick the nuts, see now you kicked the nuts get on your hands in knees, I have no clue what I'm doing, damn I don't want to wreak my shirt, Lady's love an extra inch, there is literally Blood everywhere, I don't like working on cars, now my nail is still wonky haha you 2 are great I could watch the both of you all day great great content as always o it's like a Art piece I sliced my damn finger and you laughed haha 😄
Luke you and T are epicly shibby mate !
Dealerships never do what they say. I left the industry because its fucking sad how they treat customers. I was always pushed to rush shit instead of doing it correctly.
more wifey content! happy new year!
Hey brother. Do you know if px1 and px2 lift kits are the same?
i beleive so
if you are after the best ramen in brisbane check out Genkotsu Ramen in Runcorn!. thank me later...
Don’t ever do both side at the same time do one side make sure it works then move to the other side
kinda looks like you could climb over the Z ....
The z sounds like rodknock drove it
he did 🤣
Lol I know
Seen Jimmy oakes had spoon working under car on jack and no stands or anything😮 I mean people will never learn???
👌👌👌👌🤘🤘🤟🤟🤟🤟🤟🤟🤟🤘💯💯🇦🇺🦘🦘🦘🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙
more wifey content! happy new year
Happy new year keep the great work up
What are going about the sale of speed way
Was that in a video of you nearly getting stuck under a car ? I must of missed that one
one of the american videos
R.I.P Ken Block 🍻😢
GYM, whats a GYM, oh, a giiime...
What is or was the reason for a vehicle replacement
what brand is that coil lift spacer?
Time for a new raptor
why?
@@Lukefink bc the new model with the new donk is fully sick
@@SHOCKcustoms ill wait for gen 2 of it so they can work out the bugs! I saw one had burnt to the ground the other day so ill take my time 😄 this ones only just clicked over 20k kmz
@lukefink mk2 is always better the 23.5 had already been released so updates already available
dont spend enymore $$ on the raptor
F150 are now available in Australia.
Cant jump a f150
cheak mate!!♟
Where's Russ? Shouldn't he be back by now😂
His staying another month
🤙
Or like a sr20 in a vette
KICK THE NUUUUUTZ!!
I understand the distraction brother! I never miss when my wife is bending over.. she loves the attention lol
Terrible filming can’t see anything.
NUTS....HAND TIGHT
bro i had mice in my car recently i washed the engine bay with degreaser and then sprayed it with peppermint oil in water and i put rat sak around my car and they are gone now man if you still have problems