I have to increase the size of the UEFI.vhdx to 2GB so the macOS will continue to install. After that the installation run seamlessly. Thank you so much NETVN82 for sharing this.
@@izaias85 EDIT: I changed the size for the macOS virtual disk to 64GB and assigned 8192 of RAM, with dynamic from 512 to 8192 and it moved past the error :)
Maybe this will work for you: Set-VMVideo -VMName [VMNAME] -HorizontalResolution:1920 -VerticalResolution:1080 -ResolutionType Single Run in powershell with privileges make sure you type the name of your vm instead of leaving [VMNAME]
First I installed the vm using i3 and 8 gigs of ram. After everything was ok, I updated iOS to the latest version. After that I changed the processor to a 10th i7 and increased the VM's memory to 16 gigabytes. What I remember is that in old iOS it didn't accept a lot of memory and a lot of core.
nope as opencore supports L1 Hypervisors 1 Hyper-v 2 vmware ESXI is not impossible vmware ESXI is also unix but is supports tons of hardware configurations and guest os
hi mate, my mac install keeps taking long times at the UEFI error lines screen, it freezes for minutes and then just keeps on writing random lines, ive assigned 10gb of ram and 4 processor cores, any solution?
Everything worked great but the screen resolution of the VM is stuck at 1024x768 which is too small but I cannot get the Mac to show any others because it thinks it is a Macbook Air. I need to be able to adjust the resolution.
Hi there, no matter how many times to reset, I am always stuck in the same place. What should I do next? My computer is Thinkpad X220. Thanks in advance.
One question though, May i know if we can remove Hyper v completely from windows 11 The reason I am posting this is because I want to use VM and somehow it does not let me use nested virtualization I have done almost every thing including reset of my Windows 11 machine however still Hyper v does not remove completely and been detected on windows 11
I get all the way to the point that the VM is Installing Monterey - and then it just sits and says "About 2 hrs and 19minutes remaining" and sits and sits some more... tried a few repowers, a few reboots, a few recoffees, nadda.
Thank you for your good video. It works fine for me until I click Reinstall macOS Monetery, I get this error: The Recovery Server Could Not Be Contacted Error! Any idea about this?
it didn't work for me because an error came up saying: MacOS failed to start Synthetic SCSI Controller (Instance ID A4E0A840-1A0E-43AA-8863-E41DF757FC2A): Failed to Power on with Error 'The process cannot access the file because it is being used by another process'.
go to start menu search for computer management Go to disk management Check if there the VHDX - virtual harddrives - are still attached to your computer, sometimes it can be in offline mode detach the VHDX files by right click on it and select detach
just go with the flow don't expect that all hyper-v hardware configuration to be without an error the only thing you should edit is your hardware graphic card it will go in to recovery in the end if you want a better EFI just recreate opencore after first install.
@R33L0 I tried that n many other ways watch multiple tutorials..I was able to get to desktop of Mac OS but it was dam slow. Even though my hardware specs are great
Hi Sir. Thanks for your video. But I am stuck in #[EB|LOG:EXITBS:START] Could you give me some advice what is wrong? I appreciate your help in advance.
After countless hours trying to get it set up on a VirtualBox environment I finally made it with hyper-V. Thank you very much.
After a lot of searching I found this video, thanks for your work.
Glad it was helpful!
Agree - this was incredibly helpful
It did work. I had to turn off the VM a couple times to complete the installation.
same
I have to increase the size of the UEFI.vhdx to 2GB so the macOS will continue to install. After that the installation run seamlessly. Thank you so much NETVN82 for sharing this.
how do you increase the size?
@@Somari poweroff your vm; then go to Settings > SCSI Controller > select UEFI.vhdx then Edit > Expand the disk
E como tu fez isso ? Pois estou com o mesmo problema!
sameee
Works fine. Thank u so much. Update to Sonomo 14.3.1 finished 🙂
Are you going to attempt to get iMessage working on your VM?
YOU sir are the man. The performance is light and day different than on VMware Workstation.
Get stuck on that black screen with all that white text, after starting the virtual machine
I followed all the steps but it's not moving past "System\Library\KernelCollections\xxxxx". It comes back to the booting step.
me too, you have amd ryzen ?
Gives no feedback or solution to this
Hope theres an update on this.... "hope" 🙏🏼
just wait few minutes, it shows intaller for me
@@izaias85 EDIT: I changed the size for the macOS virtual disk to 64GB and assigned 8192 of RAM, with dynamic from 512 to 8192 and it moved past the error :)
Thank you, It works perfect. How can I set a resolution bigger than 1024x768 ?
gpu paravirtualization or grub override
@@oamostwhat does that mean please can you explain?
how to do that?
@@oamost
@@oamost how?
@@crazysakthi5861 do you even know what the word computer means?
Thanks youuuuuuu!!! Mine worked!!!!!!!!!!!!. But is there a way to make the virtual machine full screen
just click the maximise button when infocus
@@NigerOfficial6 i want 1920x1080, i cant find a wat
Maybe this will work for you:
Set-VMVideo -VMName [VMNAME] -HorizontalResolution:1920 -VerticalResolution:1080 -ResolutionType Single
Run in powershell with privileges
make sure you type the name of your vm instead of leaving [VMNAME]
I have mac Ventura iso file. How to install it in Hyper - V. And in this process until 3:13 only working. The mac utility nor appear.
Thanks u so much, it worked ...
is there any way to adjust the resolution???? as it is restricted to 1024x768
Loved this video !! thank you so much for sharing!
After a long time I got best video and thanks
Awesome video. Working.. Just a quick question. Is there a way to increase the screen resolution?
That's the question what i looking for the answer for. 🙂
@@xkirby76 Everything I've read says you can't adjust the screen resolution. Have you found a way?
Everything I've read says you can't adjust the screen resolution. Have you found a way?
Its stuck at boot.
you using amd
Host PC must be Intel. It wont work on AMD.
what? 😭
the system seems to show a lot of command lines but they just keep going. Is this normal?
@@NotthefirstAdam same appears on mine also.. after the command, it coming back to boot page
Thanks very much! Great work!
I got some problem at the first
But I set my RAM size 2048 -> 8000
and now it works!
THNKS bro
Usefully! THANKS
Mình dùng intel core ultra9 185H, ko boot được vào (ko lên quả táo), có cách nào ko nhỉ NETVN82 ?
Nice my Broe light, What You See IS What You Get... Best Regards CLT Testud GTO
Thank you! it works!
is it possible to change screen resolution? I have only one option 1024x768. Not super critical, but looks small on 4K monitor
Thankkkk u working, but please help me find a way to change resolution 😂❤I only see VMware guides
got same problem. cant change it in hyper-v or in the os itself :(
@@reviewbar8094 me too, I'm getting the same issue. Tried many solutions but with no success.
Everything I've read says you can't adjust the screen resolution. Have you found a way?
Worked perfectly! Thank you.
Thank you, successfully done, Great.
First I installed the vm using i3 and 8 gigs of ram. After everything was ok, I updated iOS to the latest version. After that I changed the processor to a 10th i7 and increased the VM's memory to 16 gigabytes. What I remember is that in old iOS it didn't accept a lot of memory and a lot of core.
Looks like it is working so far :). Thanks!
ı get an error it cant boot up
# [EB I LOG : EXITBS :START ] 2023-11 20T20 :16 :17 stuck at boot
Same here, if u got any update please update me
me too, are you using AMD? Mine is AMD and it doesn't seem to work
@@williamkee6578 Im have the same problem, I have AMD. In the Readme say its not supported AMD. Only "I" CPU series
Hello, thanks for the Video, but link to Wiederherstellung not working anymore. Can you fix it please?
Thanks
thank you i boot external drive osx. BTW if you have it installed on ssd drive you can boot on hyoer v using this uefi thanks you
can we do this in proxmox?
yes hsvc has some videos on that
nope as opencore supports L1 Hypervisors 1 Hyper-v 2 vmware ESXI is not impossible vmware ESXI is also unix but is supports tons of hardware configurations and guest os
may i ask you a question? boot menu has many choices, which one should i choice?
Very helpful, thank you friend!
A sua explicação é muito boa, mas não deu certo, pois o meu PC é AMD. Teria alguma solução? Desde já agradeço
How I can change screen resolution?
I'm getting the following:
unsinged image's hash not allowed (DB)
The boot loader did not load an operating system
A boot image was not found
You forgot to disable safe boot as the vid describes
how do i optimize the VM and how do i get full screen
Eecelente... está funcionando a la perfección...
How to make full screen
hi, thank you. how we can change resolution ?
Everything I've read says you can't adjust the screen resolution. Have you found a way?
Working on Intel laptop, not working on AMD desktop. The Github page does say AMD not supported.
Oh, I wasted my time with ryzen. .
That is information that must be written down.
configure open core for amd it will be more picky but not imposiuble
don´t work on AMD =(
Helpful thanks
Bro please give another link for recovery os I am unable to download it and I need it right now
Thank you for your video!
hi mate, my mac install keeps taking long times at the UEFI error lines screen, it freezes for minutes and then just keeps on writing random lines, ive assigned 10gb of ram and 4 processor cores, any solution?
I am getting an error when trying to open the UEFI drive, it says it is not initizlized, please help
where i can download macos lion recovery?
I cant acces the recovery stuff, can someone help?
I got the vm, opened the window but theres no settings tab. I cant install the OS
MacOS installed and updated to Sonoma, but XCode failed to install platforms and so did not work.
Everything worked great but the screen resolution of the VM is stuck at 1024x768 which is too small but I cannot get the Mac to show any others because it thinks it is a Macbook Air. I need to be able to adjust the resolution.
Hi there, no matter how many times to reset, I am always stuck in the same place. What should I do next? My computer is Thinkpad X220. Thanks in advance.
Why looping.. at select UEFI(DMG)?
Hi there. Installation good thanks for the instructions, however, how on earth do I change the display from 1024 x 768 to something else
I also upgraded the virtual machine to Sonoma 14.1.1. I was amazed that it worked and upgraded without any problems
does xcode work?@@AndreDuBoisadb
@@AndreDuBoisadbi tried to upgrade but when it come to start the VM it’s blocked after the session connection
One question though, May i know if we can remove Hyper v completely from windows 11
The reason I am posting this is because I want to use VM and somehow it does not let me use nested virtualization
I have done almost every thing including reset of my Windows 11 machine however still Hyper v does not remove completely and been detected on windows 11
the link for the recovery dossent work
Not working bro. It is not even able to assign the 8GB of ram. It stacked.
When starting the v-machine, it failed to start.
it work but the aspect ratio ?
i cannot enable audio
outstanding work
Thank you so much 😀
But how to enable sound in this virtual machine?
recovery file don´t work...
Everything I've read says you can't adjust the screen resolution. Has anyone found a way?
bonjour, j'ai un RT-GV wake failure au démarage apres avoir boot sur le disque de récupération quelqu'un pourrait m'aider ?
you cant share something like this via google drive. you need to provide the source for building this
How to set the resolution to 1920x1080?
AMD CPU not supported!
how do i open hypervisor
Very nice my man
Отлично видео. Спасибо
amd working?
not for me
how to make fullscreen
I get all the way to the point that the VM is Installing Monterey - and then it just sits and says "About 2 hrs and 19minutes remaining" and sits and sits some more... tried a few repowers, a few reboots, a few recoffees, nadda.
Thank you for your good video.
It works fine for me until I click Reinstall macOS Monetery, I get this error:
The Recovery Server Could Not Be Contacted Error!
Any idea about this?
Se a maquina estiver sem internet da esse erro, confere a internet,
Webcam and Audio Not Working
Not Working, after configure and start VM I receive errore Halting on critical error
This will not work on AMD Ryzen Processors
it didn't work for me because an error came up saying:
MacOS failed to start
Synthetic SCSI Controller (Instance ID A4E0A840-1A0E-43AA-8863-E41DF757FC2A):
Failed to Power on with Error 'The process cannot access the file because it is being used by another process'.
go to start menu
search for computer management
Go to disk management
Check if there the VHDX - virtual harddrives - are still attached to your computer, sometimes it can be in offline mode
detach the VHDX files by right click on it and select detach
@@henli02 Thank you!
Recovery-File no more available on google drive
Bonjour, pour vous est-ce mieux avec VMware Workstation Pro ou hyper-v. Merci
J'ai l'impression qu'avec Hyper-V c'est plus simple
not working bro
Then probably u made a mistake coz mine worked right out of the box.
HOW TF DO I DELETE THE MAC OS FILE ON MY COMPUTER ITS IMPOSSIBLE FOR ME TO DELETE IT
Hi, thank you, but getting this kind of error, please help to get it resolved
just go with the flow don't expect that all hyper-v hardware configuration to be without an error the only thing you should edit is your hardware graphic card it will go in to recovery in the end if you want a better EFI just recreate opencore after first install.
is it possible to install macos 14 on hyper v ?
Does not work for me. Got a "panic""early on after booting the MacOS
Looks like this does not work on a Hyper-V host with Windows Server as OS. On my Windows 10 workstation I did in fact work. Thx!
it stucked on boot karnel
Installation requires a DHCP server on your network. Without DHCP the bootloader freezes on the first screen
How can I do it
Not working bro. It is not even able to assign the 8GB of ram. I have 16GB of Ram on my PC but still.
@R33L0 I tried that n many other ways watch multiple tutorials..I was able to get to desktop of Mac OS but it was dam slow. Even though my hardware specs are great
don't work for me ;-;
Working...!
Merci
its not full screen
thanks
solo a me non funziona?
Guys is this work on amd 32
As other said, no
Funcionou perfeitamente
Hi Sir. Thanks for your video. But I am stuck in #[EB|LOG:EXITBS:START] Could you give me some advice what is wrong? I appreciate your help in advance.
same issue and where to download macos image file?
Just Google it and there are tons of millions of resources on internet. pay more attention to download the ones that are bootable or installable.
The Google Drive Link is down :(