Wow, I’m so glad I found this very in-depth tutorial on design space & Cricut. I’ve been using my cricut maker 3 for about 9 months and I still didn’t know a large percent of what you went over in this tutorial. I think you did an excellent job going over everything and giving examples for each thing as well. Thank you so much, I really enjoyed learning all your tips & tricks as well. ❤
Kayla you out did yourself. I rarely leave comments or give a thumbs up. I couldn't just watch this without leaving a comment. You have set the bar high.
Hello! I', still at the start of the video, but I think it was very kind of you to show people how to speed up videos, I've never seen anyone do that before! Great job!
This is an awesome video tutorial. Everything I need to learn or to refresh my memory is covered. This will be my go to video for all my Cricut needs. Thank you so much, you are awesome!
Love your videos! I’m trying to cut out patterns for stained glass but every time it comes out like a sticker but I want all separate pieces. What setting do I use for that? Print and cut? Thank you❤
I love all your videos! How did I barely find you??? Anyway I wondered if you have ever done huge wall calendars on the circuit. I’d love a tutorial on how to do it. I’m wanting to make one about 46”x22
Such an informative video! I’m saving this to reference when I’m unsure. I’ve had my maker since 17 but they’ve done so many upgrades in the last year and I haven’t been on it as much so this was invaluable. Thank you so much truly appreciate it.
Super helpful for a beginner like me. I was unclear on downloading the picture of the dress from Target and how to add to the collections. It didn't work for me.
Brilliant tutorial. I've been using Cricut for a couple of years but I still learned quite alot so thanks heaps, really helpful. Hugs x ♥ PS do you know if there's a way to curve the score line for card making please?
Thank you so much for the tutorial! It is so helpful! 🤩😊 My “contour” button is greyed out when I try to edit out the gaps after using the “offset” for making stickers. Do you know why that might be happening? I tried to follow exactly what you did and my button just isn’t working 😭
Hi!! Of course! :) Is it set to a print then cut? If the image you're trying to contour is set to that, then the contour button will be greyed all. I would try changing that to a basic cut image and see if that helps!
I have a question, I’m trying to make a poster of alphabets, but whenever I change the size font of one to match the other, they both end up being different sizes :/ is there a way I can highlight all the letters at the same time to make them all the same size?
Thank you for this! I learned some things I didn’t know like saving a pdf of a print then cut - I gather this means we can print anytime & then go to the project to make it & it will still cut in the same places (providing our settings got saved properly)??
Now that I've got a bunch of designs oriented correctly for Design Space's auto reversal, I'm trying to use a mat size of 30.5 by 30.5 cm. The only options for my Maker 3 in Design Space are 29.7 by 42.0, 30.5 by 48.26 and 30.5 by 61 cm. I haven't really got room to use the 30.5 by 61 cm the way my workspace is right now and I have several 12" square (30.5 by 30.5 mats) but can't any vinyl on them. I also didn't weld all my repeated logos before cutting so it respaced my last cuts over 2 pages. I had it laid out exactly the way I needed and now I'm out a logo. This is the absolute worst piece of layout software I've ever used. It is so arbitrary and just takes over making decisions I would never make.
If you use a design from Cricut Design Space that has a name in it, is there an easy way to take that name out and put the name you want in?? I can’t figure it out.
I have a question, when I opened my program it upgrade by itself, I had no use in a while, the new version is not comparable to the operating system I have , sadly I can't use my Cricut any more, my computer doesn't take an upgrade , and I can't afford to buy a new one . Is is a way to reinstall the older version of design space? It was working fine before the upgrade . Please help!!!
Wow, I’m so glad I found this very in-depth tutorial on design space & Cricut. I’ve been using my cricut maker 3 for about 9 months and I still didn’t know a large percent of what you went over in this tutorial. I think you did an excellent job going over everything and giving examples for each thing as well. Thank you so much, I really enjoyed learning all your tips & tricks as well. ❤
Kayla this is one very awesome tutorial! You really did great very informative. Thank you for doing this. Love it!❣
Thanks Kayla for the great tutorial.
The tip at the beginning about slowing down the video was really helpful. I love your channel 😊l
Thank you you so much!! 💗
Thanks Kayla! EXCELLENT tutorial!!
So glad it was helpful!!! ❤❤
For some of us who are older with slow reflexes and eyes, can you make the arrow/pointer LARGER ! Thanks for this well-done but fast-moving tutorial.
Kayla you out did yourself. I rarely leave comments or give a thumbs up. I couldn't just watch this without leaving a comment. You have set the bar high.
This was a great video. Very detailing, I really enjoyed it! Thanks for sharing.
Fantastic video!! You covered everything! Thank you Kayla!
Hello and thank you for the great tutorial. Where can I find the link for the color dropper in your computers tool bar? Thank you
Hello! I', still at the start of the video, but I think it was very kind of you to show people how to speed up videos, I've never seen anyone do that before! Great job!
YOU'RE THE BEST. Thank you for sharing your tips and tricks! Super helpful as a beginner
Been using my cricut mostly by trial and error...now I know where to go for my many questions! Thank so much!
Kayla, thank you for the video. Why doesn't my design space have emboss/deboss in the edit menu bar?
is it okay if I download the design space software in 2 pc ? or does it allow 1 pc to be installed in?
I learned so much. Newbie now have a lot of stuff to try out. Thank you so much.
Amazing! Design space is not very user friendly in my opinion. I learned a lot today. 💛
09:31 You can quick zoom in and out holding the ctrl key and using your mouse wheel. Windows.
Good tip!! ❤
This is an awesome video tutorial. Everything I need to learn or to refresh my memory is covered. This will be my go to video for all my Cricut needs. Thank you so much, you are awesome!
Love your videos! I’m trying to cut out patterns for stained glass but every time it comes out like a sticker but I want all separate pieces. What setting do I use for that? Print and cut? Thank you❤
So many fantastic tips, I love this ☺☺☺
I love all your videos! How did I barely find you??? Anyway I wondered if you have ever done huge wall calendars on the circuit. I’d love a tutorial on how to do it. I’m wanting to make one about 46”x22
Such an informative video! I’m saving this to reference when I’m unsure. I’ve had my maker since 17 but they’ve done so many upgrades in the last year and I haven’t been on it as much so this was invaluable. Thank you so much truly appreciate it.
Very nice tutorial video ! 😊
Super helpful for a beginner like me. I was unclear on downloading the picture of the dress from Target and how to add to the collections. It didn't work for me.
I found this video very helpful. I am fairly new to Cricut. I have a Joy. What videos do you suggest I watch?
Thank you for the information! Wow I learned quite a few things I didn’t know about. 😊
You’re welcome! Thank you for watching! 💗
the best one iv seen yet to the point but all the information is there.great work
Brilliant tutorial. I've been using Cricut for a couple of years but I still learned quite alot so thanks heaps, really helpful. Hugs x ♥ PS do you know if there's a way to curve the score line for card making please?
Confused - If I used "advanced" to ungroup to lines and then move them around - Can I somehow go back to grouping it all together?
Thanks!
This is extremely helpful. Thank you so much.
Thank you so much for the tutorial! It is so helpful! 🤩😊
My “contour” button is greyed out when I try to edit out the gaps after using the “offset” for making stickers. Do you know why that might be happening? I tried to follow exactly what you did and my button just isn’t working 😭
Hi!! Of course! :) Is it set to a print then cut? If the image you're trying to contour is set to that, then the contour button will be greyed all. I would try changing that to a basic cut image and see if that helps!
@@KaylasCricutCreations thank you so much for the reply ! 😊🙏🏻 I just got back to it and it worked !
Thank you!!! It was very informative.
I have a question, I’m trying to make a poster of alphabets, but whenever I change the size font of one to match the other, they both end up being different sizes :/ is there a way I can highlight all the letters at the same time to make them all the same size?
Thank you for this! I learned some things I didn’t know like saving a pdf of a print then cut - I gather this means we can print anytime & then go to the project to make it & it will still cut in the same places (providing our settings got saved properly)??
Hi!! Yes, you can print it out and at a later time you can have the Cricut cut it which is really convenient! :)
@@KaylasCricutCreations Thank you! 🙂
Very helpful. Thanks for sharing.
Great Tutorial, thank you
How come I'm getting fuzzy edges on my downloads loaded svgs..
Really informative. Thanks
Meu sonho é ter a cricut maker, então fico estudando o design space. Pena que não tem
legenda em português .
Now that I've got a bunch of designs oriented correctly for Design Space's auto reversal, I'm trying to use a mat size of 30.5 by 30.5 cm. The only options for my Maker 3 in Design Space are 29.7 by 42.0, 30.5 by 48.26 and 30.5 by 61 cm. I haven't really got room to use the 30.5 by 61 cm the way my workspace is right now and I have several 12" square (30.5 by 30.5 mats) but can't any vinyl on them. I also didn't weld all my repeated logos before cutting so it respaced my last cuts over 2 pages. I had it laid out exactly the way I needed and now I'm out a logo. This is the absolute worst piece of layout software I've ever used. It is so arbitrary and just takes over making decisions I would never make.
Thank you so very much. I appreciate your time and great details of things I know was a issue for me ❤ yeah Circuit 😇
Awww! Thank you for the sweet comment and for watching my video! ❤
If you use a design from Cricut Design Space that has a name in it, is there an easy way to take that name out and put the name you want in?? I can’t figure it out.
I have tried to log in on chrome and explore and it wants me to download the app. How can I access the web version ?
My ruler is now in 2" increments and I can't figure out how to get it back to normal
About to by a cricut machine but I have a hp lab top. How do I know if I have a usb-c port? They all look the same lol
They’re all Bluetooth. They don’t connect through a port.
🙏🙏🙏 thank you so much!
Thank you so much ❤
This vidio is a little to fast for beginners your going to fast but thanks for the video 😅😅😅😅
Perfect
I have a question, when I opened my program it upgrade by itself, I had no use in a while, the new version is not comparable to the operating system I have , sadly I can't use my Cricut any more, my computer doesn't take an upgrade , and I can't afford to buy a new one . Is is a way to reinstall the older version of design space? It was working fine before the upgrade . Please help!!!
Thaaaaaaaaaaaaaanks
You kinda talk to fast for teaching this for beginners I’m not trying to be rude just saying the truth ❤
She literally showed u how to slow the video down in the first minute of the video…. Not being rude just saying the truth
Yes, I slow her video down all the time. She shows you how to slow it down at the beginning of the video..