You should dyno with the flap on the exhaust half half open. Watching previous videos from ruby at the drag strip that flap is pushed down from air resistance past the 1/8 mile.
Call me crazy, but if you turned those flaps 90 degrees, problem solved. Hell make em open up opposite of each other and when they both open it'll look like Ruby is giving the two-finger "V" for victory! Hell yeah!
Yea when the tractor flaps are closed it can create too much back pressure even being just half way closed and you can lose hp, blew up a motor amongst other things who knows that could have played a factor in that charge pipe getting cherry red hot and not just from having a broken or too small of a waste gate if he turns them around where the wind and exhaust holds them open it might pick up a little bit and he might loose that back pressure issue on the dyno
Cost wise the flights weren't bad. $600 cdn area. Hotels are cheap here too. We were in Orlando for 2 nights, currently at west palm beach for barrett Jackson then off the Bradenton tomorrow. We rented a car for $21 a day and fuel is cheap here too. All in for 2 people* if you budget properly $1500 would be doable!
I’ve never seen anybody just try so hard to push every single motor to the ragged edge. You break everything, and that’s why this channel is the best one on UA-cam. Awesome content guys.👍🏻
When people ask you why you’re deaf in old age. “Because I enjoyed myself when I was younger”. 😂 hearing protection is also not the most practical thing in the world seeing as they are listening on purpose to hear any strange noises and shift points and everything else. You can’t tune a car with hearing protection and they are all involved in the tuning process here. You can’t r ally drive a car to its fullest potential with hearing protection either.
Wow! Ruby is on fire. Before each dyno pull it would be nice to see a on-screen graphic indicating what settings is being tested (turbo PSI, timing, AFR etc). Live telemetray with each dyno run would be alright too. Love the vids and thanks for your work!
hogie48 Well me too, but when it goes back to 2 or 3 a week we're gonna be pissed because they've spoiled us with these daily uploads for the past couple weeks.
I like watching the car on the dyno but my favorite part is when Jeremy chimes in. That dude is so smart when it comes to tuning and I like to hear him talk about it
The flapper on the wastegate is so cool since you can see the second the gate cracks open, then a second later you hear the wastegate growl. Cool little shit like that I love. I always wanted to put tractor flaps on my old cars exhaust but never got around to doing it.
Seeing the second flap fly when the turbo kicks in is hilarious! Edit: So I think "Full Spool!" needs to be painted on the second flap. Like if you agree!!!!!!!!!
Out of all the cool stuff in the shop, the cars, the tools, the turbos!! Everything, I'm the most jealous of the hot dog cooker for sure!! That thing is just amazing!!
It had a happy little life, cruisin' along in a truck, perhaps using some of it's modest torque and hp at times...and then, a nice peaceful little retirement in the boneyard, until some crazy Floridians came along with their war chants. Now, it's bound for battle and someday, Valhalla!
I remember 1st subscribing to this channel I would never of thought you would be building and turning you're own cars on this channel 200% effort and deserved Cleetus HELL YEAH BROTHER!!!!
honestly i kind of view ruby as cleetus's practice car in a sense, it is just there for him (and all others) to have fun in, and practice welding, tuning, building the engine, and god knows what else
in the year or so Ive been watching Cleetus (since Leroy arrived) he has gone from "I dont know how but Ill try", to building his own 1000hp engines and turbo kits. Hes not even afraid of DOHC timing chains. Keep it up, and HELL YEAH BROTHER
Imagine: Leroy proofed in the windtunnel that He needs 600hp alone to fight the missing aerodynamic. Ruby could beat leroy with maybe 1200hp. And the automatic transmission will give cleetus a hard time in Leroy 👌👌😃
Cleetus: Goes mudding for first time. Also Cleetus: Proceeds to misuse the term "bog deep" religiously until it becomes a top selling t-shirt. Welcome to America boys and girls.🇺🇲
@@jorgem1250 working on other stuff. It is not a good drag car, so they aren't working on it very much. They are focusing a lot on Ruby and Neighbor because right now those are the attention getters. Also the Dale truck probably doesn't need any work, they don't need to add much more to it
Lesson learned, check those junkyard blocks, install all new bearings, freshen them up. Have some fun. The deep pan was a good idea, both, for windage and the fact the car leaves hard. For anyone running a dry sump oil system, check those pumps for the proper clearance before bolting them on. Guys have pulled their hair out hunting down low-pressure problems, assuming that the new dry sump pump was a quality piece. Tightening up the clearances [machining end clearances ]brings the pressure up. Keep up the great job guys. I may be one of your oldest fans.
Loved to see the decibel meter ! I work with many deaf mother truckers and they are always going on about hearing protection and they they regret not wearing it .. now you just need to wear it haha 😂👍🏽 the eardrum will likely rupture at 150db and that one pull hit 124 😂🤦🏽♂️
150 is is over 5x as loud as 124. Decibels are on a logarithmic scale. Also, as someone who works in audio, this isn't 124dB. Sitting infront of the PA stacks at a rock concert is 125dB. I have no idea where it's reading the signal from, but 124dB at those frequencies would easily leave you with ringing ears for a full day.
@@unlisted9494 1000hp open exhaust? That 123db seems about right. James is always plugging atleast one ear. I imagine coop does too. Cleetus probably gets less sitting in the car so it's not nearly as bad.
@@unlisted9494 The sensor the decibel meter reads from is probably somewhere on the car like the rest of the dyno sensors, hell, knowing these guys they probably put it in one of the pipes. Guess I'll have to wait until Cleetus and Cars tomorrow to hear for myself. I'll report back if Ruby does indeed give me ringing ears.
I unsubscribed after following him for like two years just because of that Ferrari build. And I’m glad I did now that I see he bought a WRECKED mustang. So annoying lol
...my thoughts EXACTLY. The absolute BEST straight man...compliments the others’ shenanigans perfectly. If you’ve watched alot, many of Cooper’s comments or replies sneak by all or fly right on over everyone’s heads; Cooper IS the hidden comedic gem; an all around FARGIN HAY-LARIOUS dude!!! You’re right on, Meng!!!
By far Cletus is becoming my favorite car you tuber. Love the channel. Every time I get a notification. I know my evening is gonna be good. The longer the episode better. I plan my dinner and evening around your videos. Fullsend brotha.
That was awesome. Must be great having Tuning Dad/mentor to help you out from time to time. I reckon (not that I know much about this kind of thing) that should you have any more oil issues, the next stop would be dry sumps.
Id try some dynamat (or whatever amazon discount version) on the panels for the dyno equipment. Adding the mass and damping should keep the case from rattling around and resonating. Not the egg-crate foam though, thats for stopping higher frequency reflections, and wont stop the panels from rattling anywhere near as well.
I don't even understand what's happenin - which makes me like it even more. Vice Grip Garage needs some turbo action!
I’m surprised no one has seen this comment yet 😂😂
@@diesel7903it was back when his channel was like 50 subs
😂😂😂😂😂
14:03
Coop- ayy there's a guy over there
🤣🤣😂😂😂
I swear cooper be saying some funny stuff.
It's a crazy flash back to re-watch this video and see how far the boys have come. I hope the next 3 years are just as good to yall.
Cooper: make sure you touch every square inch of every one (taquitos) lmao
Matty 100%X35 dude I was rolling. That’s literally me. I love cooper
Matty 100%X35 wipes bootle neck and opening before drinking own drink which has just been opened. Kidding I love coopies
Ryan Joyner same! He reminds me of my little brother
15:00 McFarland Fabrication shirt "Tig'n These Streets" 🤣
I died
Legend says that taquitos are still rolling in hot dog machine.
They died in the terrible latching accident and went to heaven :'(
with a golden synthetic oil fingerprint glaze on the shell
Cooper cracks me up. Too many times he remarks about things I focus on. Like how hard Cleetus was massaging the taquitos🤣
"yup. make sure you touch every square inch of every one of them." I was thinking it too
LMAO Coop is def. aware
Coop is triggered
I laughed so hard
Gotta love Cooper, he at least tries to be the voice of reason, lol.
5:00 lmao coop make sure you touch every square inch of them
Had me laughing so hard
Yup, found the germaphobe of the bunch! Lol
1000 horsepower with a Powerglide vs. Leroy slamming gears.
Cant wait.
Just hope he doesn't money shift Leroy..
Leroy he get the dub
There only one clettus he a hell of a driver
@@bsells465
Ruby is more aero. Will make a way smoother pass with the glide. It should be a close race.
He will be rusty on leroy and ruby will win one atleast 👌
Poor Cooper.
He just wants one untouched taquito lol.
You forgot to ring the bell whenever a vehicle reach the 1000 hp mark. FeelsBadMan
“Make sure you touch every square inch of every one” 😂😂😂 my thoughts exactly
Iiiit's fiiiine. :D
Mountain Herb - hahahaha!! I see what ya did there
Cooper being sassy AF.
@@davidmedina5643 The soft-spoken Cooper is highly underrated for smartassery. He is my SA hero.
Nobody:
James: We got nitrous 🤪 “makes spraying noises”
You can use nitrous for just make your turbo spool up faster. Adam LZ uses it on his s15 drift car for fast spool only.
You really think you're going to go true installing a nitro kit only for spooll, no man let that freedom kick in for the whole run
You should dyno with the flap on the exhaust half half open. Watching previous videos from ruby at the drag strip that flap is pushed down from air resistance past the 1/8 mile.
Good point! It can't be helping the high rpm restriction!
It wouldn't make much of a difference if at all on dyno but I definitely see how it could be a concern at high speed.
The way I see it, even if the tractor flaps are -150hp it's worth it
Call me crazy, but if you turned those flaps 90 degrees, problem solved. Hell make em open up opposite of each other and when they both open it'll look like Ruby is giving the two-finger "V" for victory! Hell yeah!
Yea when the tractor flaps are closed it can create too much back pressure even being just half way closed and you can lose hp, blew up a motor amongst other things who knows that could have played a factor in that charge pipe getting cherry red hot and not just from having a broken or too small of a waste gate if he turns them around where the wind and exhaust holds them open it might pick up a little bit and he might loose that back pressure issue on the dyno
Cleetus: *we'll add a couple degrees of timing to get it up on the 2 step a little faster*
James: *Or there's always nitrous*
That'd be a good t-shirt..."There's always nitrous"
Now that's how you film the results of a dyno pull ! Nice and Clear & can see the shape of the curve in addition to peak numbers. Great job
@14:02 I broke my computer screen trying to high five James. Dammit Cleetus!
Then how did you write that comment
@@mobsnitchanonymous213 they probably broke a part of the screen
Mobile phone work great for making comments
To bad not a single person cares about your fake ass comment grow up
Except for the guy that cared enough to reply 😂
Flew into Florida from Saskatchewan Canada! Pumped for tomorrow! 🇨🇦
Hell I wish I could come in from Alberta but I got finals and its kind of expensive! How much did it cost ya?
You come from where all the big Deer live
Dedicated fans!
Cost wise the flights weren't bad. $600 cdn area. Hotels are cheap here too. We were in Orlando for 2 nights, currently at west palm beach for barrett Jackson then off the Bradenton tomorrow. We rented a car for $21 a day and fuel is cheap here too. All in for 2 people* if you budget properly $1500 would be doable!
@@darinmiller8687 yeah we got some big units up here!
I love how James is always committed for the high five. he would go home like that if Garrett left him hanging.
Second time Cleetus left him hanging this WEEK! It's an abusive relationship.
I’ve never seen anybody just try so hard to push every single motor to the ragged edge. You break everything, and that’s why this channel is the best one on UA-cam. Awesome content guys.👍🏻
I just left my girlfriends house to watch this in my car so I had complete silence 😂
I'm in my garage so I can get away from my wife
Adrian Swan same lol
Lol I waited till everyone went to sleep and have my Bose Bluetooth headphones on
Bluetooth Skullcandy pb&j on Italian bread fig bars peanut butter cookies and a big ol mug of high test milk then off to bed
ZSTRODE. I lasted 5 mins in bed just to come watch this
I love that you can see the dale truck in the reflection of the dyno graph
Please use hearing protection, I know you guys like doing things your way but future-you will appreciate it!
100% this
Hearing aids are amazing now keep moving along
Agreed
Amen to that. I never cared thinking I was too "cool". The tinnitus is have to live with is insane. I miss silence. T_T
When people ask you why you’re deaf in old age. “Because I enjoyed myself when I was younger”. 😂 hearing protection is also not the most practical thing in the world seeing as they are listening on purpose to hear any strange noises and shift points and everything else. You can’t tune a car with hearing protection and they are all involved in the tuning process here. You can’t r ally drive a car to its fullest potential with hearing protection either.
Shout out to Coop for not letting James highfive be left hanging
Yessir!
That cooper seems like a real stand up dude.
Gota do it for dail
Stoked to see Ruby Shred tomorrow at Cleetus and Cars, should be a blast, gunna go full send with the Z in the burnout box
Just sliding in with the comment taylor 😂 i see you... Cant wait to see the z shredding
15:57 "We'll proly give it a degree, and then just maybe like a pound or two of boost.....SHE GON' BOGG!!" 😂😂
Small shot of Nitrous for about a 2 seconds will take care of that turbo lag. Lol
Better check under the dash for a mini bottle :)
But don't bring Nitrous anywhere near James! It won't be a small shot for only 2 seconds hahahaha.
I'd bet on a PID driven solenoid rather than a timer circuit under PWM; CONSTANT DATAAAAAAAAAAAA (and continual gentle reducing of error bars)
Or rolling launch control, anti-lag works too.
Nitrous runs out ;)
With the Closed captions on every pull it says "Music" an "Applause" Hell yea eagle brothers
the harmonics of a big pull like that are music to my ears anyway
On my way to Cleetus and cars from Houston, about to head out in 30 minutes
How are you on your way but about to head out?
YESSSSS!
Safe travels.. 👍 🇬🇧
Daniel Martinez it’s been 35 minutes did you leave yet 🤔🤔🤔😂😂
Robie S197 about to head out of My house but I’m on my way to my car haha
5:11, our hotdog roller needs a boost a pump😂😂😂
Wow! Ruby is on fire.
Before each dyno pull it would be nice to see a on-screen graphic indicating what settings is being tested (turbo PSI, timing, AFR etc). Live telemetray with each dyno run would be alright too.
Love the vids and thanks for your work!
We need BOG DEEP tee-shirts. Either with the Tracker with the snorkel on it or with Ruby on it. I will definitely buy that tee shirt for sure!!
im waiting on a bog deep shirt
I'm sure it's coming the moment they cross the pond?
Jesus christ this upluad schedule is on point!
Steve Rambo We're getting spoiled
@@bobfalfa76 Don't say that! I would love to see 5 a week every week lol.
hogie48 Well me too, but when it goes back to 2 or 3 a week we're gonna be pissed because they've spoiled us with these daily uploads for the past couple weeks.
I like watching the car on the dyno but my favorite part is when Jeremy chimes in. That dude is so smart when it comes to tuning and I like to hear him talk about it
The flapper on the wastegate is so cool since you can see the second the gate cracks open, then a second later you hear the wastegate growl. Cool little shit like that I love. I always wanted to put tractor flaps on my old cars exhaust but never got around to doing it.
14:53 that’s the best welding I have ever seen holy cow
It falls off because of the t4 flange ... switch to t6 and watch graph change :) 👍
18 more hp I'd say so
GT45 flange?
How does a flange change the graph and add hp? Im not into cars like that so idk😬
@@chriselias2841 More air=more power. The smaller Exhaust flange is a bottleneck when you are talking 1000hp.
@@eriklarson9137 thanks for explaining my guy🤘
Hits dyno with junkyard engine and bigger turbo
James : am i a joke to you ?
Haha
Alpha Wërks No it’s still using the same old goodies in the old motor.
Alpha Wërks it’s the same 200k block and crank. Texas speed rods and pistons tho
True it is built and i know; but the motor is originally a junkyard one ; thats what i pointed for lol
@Alpha Wërks If it has a block from a junkyard, then its still a junkyard engine
Seeing the second flap fly when the turbo kicks in is hilarious!
Edit: So I think "Full Spool!" needs to be painted on the second flap. Like if you agree!!!!!!!!!
Laser etched or flow jet
It will burn the paint off first run
paint "full spool" on both sides of the flapper so you can see it from the passenger seat
Hah hah perfect!🤣
Cleetus and Jeremy linking up was best possible scenario. Grade A entertainment every time. Keep em coming brother! 👌🤟🇺🇸🇺🇸🇺🇸
You didn't ring the 1000+ hp freedom bell!!
McFarland Fabrication
TIG in the streets, MIG in the sheets
Lmao!
lol
This should be a their next t-shirt ! Lol
BOGGIN' DEEP
Firstname Lastname is allowed only thing we need is freedom and we have plenty of it
@@RestrictedHades bad boys 2, come on now, haven't u seen it!
“...advance timing table in the Holley and then Duggoo bu BAh BAh BAh...”
-Tech Talk from McFarland Fabrication.
Cooper: “make sure you touch every square inch of every single one”
"Make sure you touch every square inch of em"💀💀💀🤣🤣🤣🤣🤣
12:39- That two tractor flap acion is killing me !🤣🤣
The full pull shirt version 2 should be a picture of Ruby with the engine half out on an engine hoist.
“Just a safe tune”
And that is why no one will remember your name**🤾🏽♂️
You can tell James is married. He cares about how the fridge looks
Brady Brooks 😂
Out of all the cool stuff in the shop, the cars, the tools, the turbos!! Everything, I'm the most jealous of the hot dog cooker for sure!! That thing is just amazing!!
I love the way you guys work together and how Jeremy coaches cleetus with the tunes
Watching this in New Zealand on Saturday morning while in bed drinking coffee
My man
If it is Saturday morning there look up the scores from last nights NBA games here in the US so I can call a bookie.
@@berrytharp1334 can't give away all my betting secrets. But for a small fee I will give you them 😂
Why has 4wd Action not uploaded yet?
bryce newsome lol same here in Australia...but you are 2hrs ahead
Screw the car! I wanna know where you can buy bulk 7-11 Taquitos from!
Ruby's engine looks like an elephant holding a turbine with her trunk.
((Marketing Oppurtunity))
Texas Speed: This engine is good for 700 horsepower. Cletus: 1200 horsepower you say.
Get Jeremy to tune the car with the new Turbo. What was the psi boost on the 1019.5hp pull?
In for boost numbers
Version 2 of the full pull shirt needs to have James pulling a toolbox to a dumpster on fire
or james spraying nitrous on the dumpster fire
@@josephphillippe8823 LOL
@@josephphillippe8823 awesome
I bet this engine block didn't expect to make that much hp when it was created 😂😂😂
For damn sure, but she loves it
It had a happy little life, cruisin' along in a truck, perhaps using some of it's modest torque and hp at times...and then, a nice peaceful little retirement in the boneyard, until some crazy Floridians came along with their war chants. Now, it's bound for battle and someday, Valhalla!
But it dreamed big!
@@andytaylor1588 your comment made my f*ckin day haha
LOL, there's probably this tiny voice deep in the oil sump where no one can hear, screaming... *"Help Meeeeeeeee!!!"* 😱
Ol’ Coop, with the low-key ball-busting makes me laugh like an idiot...
Nice pull!!!!!
I remember 1st subscribing to this channel I would never of thought you would be building and turning you're own cars on this channel 200% effort and deserved Cleetus HELL YEAH BROTHER!!!!
honestly i kind of view ruby as cleetus's practice car in a sense, it is just there for him (and all others) to have fun in, and practice welding, tuning, building the engine, and god knows what else
you're so lucky to have such an awesome little family there with you.
love this stuff.
keep it coming mate
Never clicked so fast this has made my Friday complete
i second that right in time for bartleskeet:30
Every time he post I’m there watchin 💯
👍😁👏👏👏🍻🍻🍻
facts! put paper in the machine AND SEND IT!
aaron morgan boostedboiz next on the list🤙
Better watch out, Jeremy is going to have you sign a no compete clause.
Lets build a junkyard car, aaaaannnnd it makes a 1000 hp.
"Junkyard"
Just LS things lmao
in the year or so Ive been watching Cleetus (since Leroy arrived) he has gone from "I dont know how but Ill try", to building his own 1000hp engines and turbo kits. Hes not even afraid of DOHC timing chains. Keep it up, and HELL YEAH BROTHER
James : feeling cute idk might open an entire bottle of nitrous in everything later.
LMAO That sounds about right!
IDK....
wear some ear protection .... your nice sign even be telling ya to
Imagine: Leroy proofed in the windtunnel that He needs 600hp alone to fight the missing aerodynamic. Ruby could beat leroy with maybe 1200hp. And the automatic transmission will give cleetus a hard time in Leroy 👌👌😃
Massive congratulations on Ruby's new 1000hp+ heart, she sounds amazing.
Dropping the like when watching the intro. You just know it’s going to be good when Cleetus posts a video
Cleetus: Goes mudding for first time.
Also Cleetus: Proceeds to misuse the term "bog deep" religiously until it becomes a top selling t-shirt.
Welcome to America boys and girls.🇺🇲
My girlfriend likes it that way lol
Sounds like a group of dumbfucks honestly
DUDE, you guys have a sound Dyno??! "She made 123 to the earz" LOL
rbeaton16 yeahhhhh r/wooosh
rbeaton16 WOOOOOOOOOOOOOSH
@@rbeaton16 wooooooooooooosh
Buys a junkyard motor a semi decent corvette...makes it into a beautiful masterpiece!
Buys 3 junkyard motors blows 2 * 🤣😂
Honestly kinda missing the videos on the Dale Truck
Why they stop making them ?
@@jorgem1250 not sure
@@jorgem1250 working on other stuff. It is not a good drag car, so they aren't working on it very much. They are focusing a lot on Ruby and Neighbor because right now those are the attention getters. Also the Dale truck probably doesn't need any work, they don't need to add much more to it
True, just wondering if the have anything planned for it soon
You say this now, but just wait till Mullet is ready! ;)
Lesson learned, check those junkyard blocks, install all new bearings, freshen them up. Have some fun. The deep pan was a good idea, both, for windage and the fact the car leaves hard. For anyone running a dry sump oil system, check those pumps for the proper clearance before bolting them on. Guys have pulled their hair out hunting down low-pressure problems, assuming that the new dry sump pump was a quality piece. Tightening up the clearances [machining end clearances ]brings the pressure up. Keep up the great job guys. I may be one of your oldest fans.
Respect for this channel coming all the way from Africa!!
Gianluca Salvoldi what ?
@@estevanvaldez437 u don't understand English?
@@estevanvaldez437 read it again
I accidentally wrote that
Loved to see the decibel meter ! I work with many deaf mother truckers and they are always going on about hearing protection and they they regret not wearing it .. now you just need to wear it haha 😂👍🏽 the eardrum will likely rupture at 150db and that one pull hit 124 😂🤦🏽♂️
150 is is over 5x as loud as 124. Decibels are on a logarithmic scale. Also, as someone who works in audio, this isn't 124dB. Sitting infront of the PA stacks at a rock concert is 125dB. I have no idea where it's reading the signal from, but 124dB at those frequencies would easily leave you with ringing ears for a full day.
@@unlisted9494 1000hp open exhaust? That 123db seems about right. James is always plugging atleast one ear. I imagine coop does too. Cleetus probably gets less sitting in the car so it's not nearly as bad.
@@unlisted9494 The sensor the decibel meter reads from is probably somewhere on the car like the rest of the dyno sensors, hell, knowing these guys they probably put it in one of the pipes. Guess I'll have to wait until Cleetus and Cars tomorrow to hear for myself. I'll report back if Ruby does indeed give me ringing ears.
Sorry TJ Hunt, you'll have to wait - there's a new Cleetus video!
Lmao
I unsubscribed after following him for like two years just because of that Ferrari build. And I’m glad I did now that I see he bought a WRECKED mustang. So annoying lol
Itsjusta6 can wait too “gayasfuk”
TJ hunt is what fake car guys watch. So you wouldn't be wrong to unsub
Cooper spaghetti is underatedly hilarious
...my thoughts EXACTLY. The absolute BEST straight man...compliments the others’ shenanigans perfectly. If you’ve watched alot, many of Cooper’s comments or replies sneak by all or fly right on over everyone’s heads; Cooper IS the hidden comedic gem; an all around FARGIN HAY-LARIOUS dude!!! You’re right on, Meng!!!
So awesome to see Jeremy part of his wisdom for you guys! This all shows how important a good tuner is. Gratz on the 1k+!
Congratulations Ruby welcome to the 1000 horsepower Club
Still waiting for the hood to go back on Ruby
Killing me with those welds😂🤣😂😪
I scrolled for this comment. I knew there was at least one 😅
"Make sure you touch every square inch of every one" ....... Cooper you crack me up!
A Mountain Dew green shirt with "FULLLLL PULLLLL" & Ruby & Leroy leaving the tree together!
Cleetus: we're just gonna make 1000 hp and call it..................
Does 2 more 1k pulls 😎😂
Dang that new turbo sounds like bald eagles chugging bartle skeet
Cooper said make sure to touch every inch of them lmfao sarcasm at its finest. Taquito struggle haha
By far Cletus is becoming my favorite car you tuber. Love the channel. Every time I get a notification. I know my evening is gonna be good. The longer the episode better. I plan my dinner and evening around your videos. Fullsend brotha.
I must say, I'm really diggin' the reflection of the Dale Truck in the dyno screen. May Dale be with you!
Dude loving all your recent daily uploads keep it coming!!!!
The daily uploads makes my UA-cam red sub worth it
Cleetus channel is Awesome! Always Great content
Cooper hands down has the best one-liners xD
That was awesome. Must be great having Tuning Dad/mentor to help you out from time to time. I reckon (not that I know much about this kind of thing) that should you have any more oil issues, the next stop would be dry sumps.
WOW...just moving the spark event 1/360th is good for 18 horsepower. Tuning is such a delicate flower..
Dang and I was about to get ready for work! Now I'm late and I'm not even mad.
James gonna be a fantastic grandpa
Best channel on UA-cam hands down.
Ruby vs kyles prelude has to happen
I was going to say the same thing Battle of the thousand horsepower cars and big turbo cars
Id try some dynamat (or whatever amazon discount version) on the panels for the dyno equipment. Adding the mass and damping should keep the case from rattling around and resonating. Not the egg-crate foam though, thats for stopping higher frequency reflections, and wont stop the panels from rattling anywhere near as well.
Cleetus “we’re gonna make 1000 and be done”
James “meehh,, 1100” 🤣🤣
124dB...
And the exhaust is not glowing... call that a success.