Longshot is a great powder, I find 30 grains in any combo of hull and wad with anything from 1oz slugs to 1 &1/4 shot to as much buckshot as it will hold works great.
Wade, every time I watch one of your buckshot loading vid's I learn something. I have some of those Rio's. Now I know what to do with them! Great series. 👍👍
Kind of a side note on those Rio shells... I've had nothing but great results with their shotshells. I got a hold of a bunch of their 2-3/4 steel shot loads and hunted with them all season and they shot great... They also load up really well.
Same thing here my reloading room is in the attic and it gets hot so what do when using the fan is use the manual mode I put the cover on then push dispense keeping it on slow and it does pretty good with some over charge not bad I do like my hornady and it works great so far with my powders I have enjoy 👍
Thanks again bud, just got some long shot & ordered clear hulls & a whole mess of lead from ballistic products... really appreciate what you do bud, bless ya & stay safe 👊!
I run the Intelli dropper and I like it. It has a feature to calibrate the powder delivery. Then an auto mode as well as manual. And of course, Bluetooth software so you can save load data.
Hi Wade, Excellent video on the MG42 and Longshot powder!!! I really enjoy your videos!!! I find the videos to be informative and interesting and very useful. Wade yourvmy favorite shotgun channel!!! Have a blessed!!!
29 grains I swear my bottle said 34 and 37 gr I almost tore off my trigger finger I’m going to lighten the load to 29 see if works to little powder I was getting unburnt powder so maybe 29 is better glad I watched your video
Exelente este señor.a pesar d estar en venezuela y no contar con las herramientas y el material adecuado.gracias a el e mejorado muchisimo mis tiros con escopeta en la caza mayor..saludos desde venezuela.seguidor numero 1
I got 500 once fired Gun club hulls and a few started rusting after I loaded them. I'm going to let them sit a while so I can sort out the rusty ones. I have since changed to new, Cheddite, clear, primed hulls. The first light range powder scale I got was really susceptible to the slightest wind, even from the whole house central A/C turning on.
Off your suggestion i picked up some longshot to make some mag defense loads with and will start with your 29 grains of LS and go from there. Im shooting a Turkish 12gauge magnum escort 3in.
50k views and less than 800 likes 👍🏼????? What’s wrong with yall? I know I ain’t the only guy watching this for the 20th time to soak up the knowledge he’s sharing. Smash that 👍🏼 and give these folks some credit for all that they do. Thanks again Wade !!!
I had a ton of over charges running on normal or fast speed for the Hornady lock and load utilizing Longshot powder. Once I slowed it down to slow mode and stop Receiving over charges prior to that it was every three or four I’d get an overcharge on normal.
You can hold the mode button and tell it when to start slowing down to trickle the final charge in 0.2 grain increments. Some powders meter very quickly, and I have to tell it to trickle anywhere from 0.6 grains to 1.0 grains of powder.
LOL! You bet! The squirrels need some thinning out for sure! The reloading components are improving at a rapid rate now. It's amazing what you can accomplish with a shotgun now!!
I use it in 44 magnum and love it. I am just getting into ahotshell reloading (got everything, but haven't had a chance to test fire my first shotgun, let alone make shells), so it looks like the LS I already have will serve me well for my shotgun.
Wade can you do a 12ga shotshell reloading for beginners the wads and hull is what I'm struggling with the most and what I'm nit comfortable with yet imma check your channel out for more information
thanks again for info wade!!!!! looks like Lee buckshot mold is my only choice for now . other option still not up in production for now. wade if any other info on molds come up would be appreciated.!!
I hate that chrono I've had same one for years...always erratic results have to have the sun and shade just right ect...wanting to justify buying a new one it's been grazed with 40, 270, 7mag...damn thing wont die. I got tig wire welding rods holding the shades up lol damm thing wont die but still works just enough...
Your videos are so packed with good information , that I sometimes pick up upon important snippets the second or third time watching . You mentioned in passing that Longshot , while not very compressible , takes up less volume than the typical Buckshot powder charges of the other usual suspect Buckshot powders . As I am finally getting ready to start loading Buckshot , my focus will be on 12ga 2.75 and 20ga , making efficient use of the hull capacity will be important . In broad rule of thumb , how would you rank the ( amount of hull space required ) for the usual Buckshot powders ? Say Longshot , 800-X, Blue Dot, etc ? I have those on hand now , for that matter Red Dot, Green Dot, Clays, and Universal to try for slower Reduced Recoil loads . I picked up on the MG-42 performing well with lesser constriction , and conventional non Buckshot specific chokes . Even hinted some degree of similarities to performance of Flite Control . I know y'alls primary focus is big game and preditors with specialized full size guns . But the *Other* common usage of Buckshot is Defensive/ Duty . And in those contexts the 20in bbl is the norm , often with fixed cylinder bore non- choke . ( Yeah , that's a poor choice , but it's a vicous circle where most users have them because that's what most mfgs make, in turn because that what most purchasers buy .) Would MG-42 be worthwhile approach for use in cylinder bore ? Any other likely wads to try ? Have you ever done any development for cylinder bore to get them up to " medium range " capabilities for hunting ? I have a couple guns that were chopped to 18-ish inches before they came to me , and several of my associates have the factory 18-20 inch fixed cylinder bbls .
Longshot is 1 of my fav powders simply because it doesn't take up as much space as other mag/slow-burning powders. 800x, and the Blue powders take up about the same amount of space with Steel powder coming in 1st as the powder that takes up the most space in your round. The MG42 is 1 of the most versatile wads that I have ever used! It would be highly effective as a home-defense load option.
Hey man I can’t find any info online for long shot reloading data I’m trying to load some 6petal twister slugs Weights are around 496-500 grains And 12 pellet #1 buckshot Weight at 496 grains
Good day Mr. Bubba, I have a simple question for you about the reloading of some 00 buck loads. Now I'm fairly new to reloading and because of all the shortage in just about everything these days and trying to find a gun range that allows shotguns without driving 2 to 3 hrs has been a challenge for me to test some of these loads. Anyways I got into a discussion with a guy about wads, I thought that whatever the wad stated like 7/8, 1 1/8, or 1 3/8 you could use whatever lead shot you wanted example if you wanted to use #8 you could, if #4 you could and even 00 buck, you could as long as it wasn't any of them one of the harder metals and as long as you didn't go over that weight. This guy was telling me that that's not correct, that let's say 7/8, 1 1/8, or whatever it may say is for the smaller shot like #6, #8, etc. and those wads can't be used for buckshot. That the wads will say that they are for the buckshot loads, now me being new searched and searched trying to verify what he said and I can't a single thing to back up my case nor can I find anything to back his case. I would appreciate it if you could take the time to clear this up for me, and thanks for the great videos you put out, very informative.
Hey Joel! It's always about your 'Lead payload weight' As long as you're using lead shot or projectiles all you need to know is the weight of the payload. It doesn't matter on what size the shot is: #12 skeet shot or #0000 buckshot, doesn't matter as long as the weight is the same! Wade
I was told by hodgdon i cant use longshot for buckshot. Hodgdon told me it was only used for heavy birdshot. So how many grains for a new 2 3/4 fiocchi hull with 9 and 10 pellet 00 buck from hornady
Bubba Rountree Outdoors thanks I'm going to get a benelli ethos for getting good grades and I was going to purchase a kicks choke but I wanted to make sure I didn't blow the choke out of the gun with plated shot
That's awesome! Congratulations on the grades buddy! Benelli is 1 of the best... The Nickel/Copper plating on buckshot is extremely thin! As long you just shoot lead shot... Kicks chokes are guaranteed for like!
Been watching your videos for a while. I don't load shotshells only handguns and rifles. I'm wanting to get into loading shells for only one load in particular. #4 buck or T for coyotes. I can't find a factory load that gives me a reliable 50 yard pattern. 5 or 6 in a 12" circle just don't seem that good. What's your take?
I have long shot powder original buffer cci mag primers mg 42 wads and sp12 wads once fired rem hulls 2 3/4 and 3inch I’m wanting to load 000 buck any info on powder charge and will I have to cut petals off thanks
Hey Wade, big fan of the videos. Just started reading the comments, I usually just watch the show and don't pay attention to the comments so forgive me if you have already answered this. Im here in South Eastern NC where we also run dogs for deer. My preferred load has been commercial Winchester 3in #1 buck with 24 pellets, how come your loads only hold 18 #1s? thanks in advance
My #1 buck load is a custom load. The factory #1 doesn't have a full-length wad and they stack 8 rows of 4. My custom loads have 6 rows of 3 pellets! The factory #1 will only get out at 1000 fps and I can get over 1200 fps with my lighter pay-load! Wade
Thanks Wade, I get it now. Im gonna work some up for this season, all my loads will be #1's or #4's. I'm going to load some like factory with the gas seal and fiber wad and then some more with the MG-42 that i just ordered. Thanks for the info.
It's not how many pellets you launch , it's how many hit the target that matters . So a lighter payload that patterns tighter could actually be more effective downrange .
Visitor's fee is $35 ea. You can visit 2 times a season. We usually start taking visitors around the 3rd week in Sept. You can contact me direct here: Wade@BubbaRountree.com
I'm working on a 16 ga buckshot video now Mark! It's been tough to find 16 ga components! I've been working on some combos with what I have. Hopefully I can get her posted sooner than later. Wade
@@BubbaRountreeOutdoors Awesome !!! I found your site and have been watching all the loading and your Dog hunts vidioes I can find ! Love the sound of the hounds ringing in the woods !!! 🦌
How high can you load sr4756 .can you go past 39 grains for a 1 1/4 ounce slug .I want to push a Diablo style slug as fast as I can without going over 11500 psi .I'm using a fiocchi 3 inch hull and a wad that fits that slug perfectly
i've never used the 4756 in a slug load. Head over to the Buck and Slug reloaders page on FB and ask those guys: facebook.com/groups/buckandslugreloaders
@@BubbaRountreeOutdoors thank you for want you do and the heads up.I was given 3 1lb cans .And don't want it to go to waste .It's a good ,hard to get powder now Was going to load some 38 specials in hbwc for target . .Just finding load data is harder now especially since it was discontinued .
Longshot is a great powder, I find 30 grains in any combo of hull and wad with anything from 1oz slugs to 1 &1/4 shot to as much buckshot as it will hold works great.
I love this channel. I screwed around with loading buckshot and slugs years ago but you take it far . Love it.
Wade, every time I watch one of your buckshot loading vid's I learn something. I have some of those Rio's. Now I know what to do with them! Great series. 👍👍
Thank you for the information and wishing you and all a blessed year under the completely compromised condition's this country is facing
Thanks pal!
Kind of a side note on those Rio shells... I've had nothing but great results with their shotshells. I got a hold of a bunch of their 2-3/4 steel shot loads and hunted with them all season and they shot great... They also load up really well.
You get great results with the improved modified choke. Thanks for sharing!
As always, you do a great job. Brother, I appreciate your work!
Thanks Leon! Hope y'all are well bro! Talk back soon...
Same thing here my reloading room is in the attic and it gets hot so what do when using the fan is use the manual mode I put the cover on then push dispense keeping it on slow and it does pretty good with some over charge not bad I do like my hornady and it works great so far with my powders I have enjoy 👍
Julio is right! You put the hood over the scale and problem solved!
Thank you Wade and Rachel
Thanks John! The guy's work schedules are terrible this time of year! If it weren't for my girls, I would be in trouble...
Love the popcorn maker. Essential to reloading.
Thanks again bud, just got some long shot & ordered clear hulls & a whole mess of lead from ballistic products... really appreciate what you do bud, bless ya & stay safe 👊!
I run the Intelli dropper and I like it. It has a feature to calibrate the powder delivery. Then an auto mode as well as manual. And of course, Bluetooth software so you can save load data.
I really enjoy watching your videos Wade I have learned a lot from your instructions I for one appreciate your time
my pleasure Ronald!
Hi Wade, Excellent video on the MG42 and Longshot powder!!! I really enjoy your videos!!! I find the videos to be informative and interesting and very useful. Wade yourvmy favorite shotgun channel!!! Have a blessed!!!
Thanks brother! It's my pleasure.
29 grains I swear my bottle said 34 and 37 gr I almost tore off my trigger finger I’m going to lighten the load to 29 see if works to little powder I was getting unburnt powder so maybe 29 is better glad I watched your video
Exelente este señor.a pesar d estar en venezuela y no contar con las herramientas y el material adecuado.gracias a el e mejorado muchisimo mis tiros con escopeta en la caza mayor..saludos desde venezuela.seguidor numero 1
Es un placer Jean Mark! ¡Gracias por pasar por mi canal! Wade
I got 500 once fired Gun club hulls and a few started rusting after I loaded them.
I'm going to let them sit a while so I can sort out the rusty ones.
I have since changed to new, Cheddite, clear, primed hulls.
The first light range powder scale I got was really susceptible to the slightest wind, even from the whole house central A/C turning on.
yeah! brass is no longer real brass anymore! It's more chrome plated steel.
Off your suggestion i picked up some longshot to make some mag defense loads with and will start with your 29 grains of LS and go from there. Im shooting a Turkish 12gauge magnum escort 3in.
awesome! in a self defense load, I would start with 26 grains and work up of you have to... Wade
50k views and less than 800 likes 👍🏼????? What’s wrong with yall? I know I ain’t the only guy watching this for the 20th time to soak up the knowledge he’s sharing. Smash that 👍🏼 and give these folks some credit for all that they do. Thanks again Wade !!!
😉 Thanks brother!!
I had a ton of over charges running on normal or fast speed for the Hornady lock and load utilizing Longshot powder. Once I slowed it down to slow mode and stop Receiving over charges prior to that it was every three or four I’d get an overcharge on normal.
You can hold the mode button and tell it when to start slowing down to trickle the final charge in 0.2 grain increments.
Some powders meter very quickly, and I have to tell it to trickle anywhere from 0.6 grains to 1.0 grains of powder.
I always got good patterns with #00 with the improved modified choke it's my choke of choice with buckshot
More awesome loads. Looks like you could squirrel hunt with those at 60 meters easy enough.
LOL! You bet! The squirrels need some thinning out for sure! The reloading components are improving at a rapid rate now. It's amazing what you can accomplish with a shotgun now!!
I sure have learned a lot from you ! Good stuff !
I put my hornady power dispenser on slow and put a 1/4 inch piece of wood under the front to slope it a bit very few over charges that way
Personally I really like Longshot. I use it for 12g, 20g and 9mm. It just seems to be across the board a hot powder.
The fan blowing will cause bad readings from the scale. Also not letting it warm up can cause a issue.
Yep... we figured that the fan was a problem! Thanks buddy!
I assume #47 buffer is the type of buffer not the weight? If so, how do you know how much buffer to put in?
Longshot is my go 2 40cal powder super velocity with low pressure well low for 40sw
I got some for my 12 but will use it in my nine as well. 4.7 with 147 xtp hp should put me at 1,005.
I use it in 44 magnum and love it. I am just getting into ahotshell reloading (got everything, but haven't had a chance to test fire my first shotgun, let alone make shells), so it looks like the LS I already have will serve me well for my shotgun.
Wade can you do a 12ga shotshell reloading for beginners the wads and hull is what I'm struggling with the most and what I'm nit comfortable with yet imma check your channel out for more information
Have you ever tested Winchester 572 powder?
thanks again for info wade!!!!! looks like Lee buckshot mold is my only choice for now . other option still not up in production for now. wade if any other info on molds come up would be appreciated.!!
You bet Larry! It's a mind blower what a reloader can accomplish now-a-days!
I hate that chrono I've had same one for years...always erratic results have to have the sun and shade just right ect...wanting to justify buying a new one it's been grazed with 40, 270, 7mag...damn thing wont die. I got tig wire welding rods holding the shades up lol damm thing wont die but still works just enough...
Your videos are so packed with good information , that I sometimes pick up upon important snippets the second or third time watching .
You mentioned in passing that Longshot , while not very compressible , takes up less volume than the typical Buckshot powder charges of the other usual suspect Buckshot powders . As I am finally getting ready to start loading Buckshot , my focus will be on 12ga 2.75 and 20ga , making efficient use of the hull capacity will be important .
In broad rule of thumb , how would you rank the ( amount of hull space required ) for the usual Buckshot powders ? Say Longshot , 800-X, Blue Dot, etc ? I have those on hand now , for that matter Red Dot, Green Dot, Clays, and Universal to try for slower Reduced Recoil loads .
I picked up on the MG-42 performing well with lesser constriction , and conventional non Buckshot specific chokes . Even hinted some degree of similarities to performance of Flite Control .
I know y'alls primary focus is big game and preditors with specialized full size guns . But the *Other* common usage of Buckshot is Defensive/ Duty . And in those contexts the 20in bbl is the norm , often with fixed cylinder bore non- choke . ( Yeah , that's a poor choice , but it's a vicous circle where most users have them because that's what most mfgs make, in turn because that what most purchasers buy .)
Would MG-42 be worthwhile approach for use in cylinder bore ? Any other likely wads to try ?
Have you ever done any development for cylinder bore to get them up to " medium range " capabilities for hunting ? I have a couple guns that were chopped to 18-ish inches before they came to me , and several of my associates have the factory 18-20 inch fixed cylinder bbls .
Longshot is 1 of my fav powders simply because it doesn't take up as much space as other mag/slow-burning powders. 800x, and the Blue powders take up about the same amount of space with Steel powder coming in 1st as the powder that takes up the most space in your round. The MG42 is 1 of the most versatile wads that I have ever used! It would be highly effective as a home-defense load option.
Your recipes pattern great! But how much penetration are you getting at those distances?
We are getting complete penetration at 100 yards and beyond.
@@BubbaRountreeOutdoors Complete meaning???? Through paper or 2" thick wood?
All the way thru the animal or pellets stopped by the hide on the opposite side. @@raywhitlock3617
Keep your cell phones and others electronics away from your digital scales .Also air moving around will cause errors
Hey man
I can’t find any info online for long shot reloading data
I’m trying to load some 6petal twister slugs
Weights are around 496-500 grains
And 12 pellet #1 buckshot
Weight at 496 grains
I'm looking for 1 powder for both 410 and 12ga with 00, 000, and slugs. What 1 powder(s) will do both?
Great patterns! 👍👍 I never used Longshot and I know it is a bit faster than Steel, would you load some steel shot for waterfowl using Longshot?
Thx
Old post, but I use LS under 1 ounce of steel BBs in Remington STS hulls, works great. I haven't seen Alliant Steel for sale in over 2 years.
Good day Mr. Bubba, I have a simple question for you about the reloading of some 00 buck loads. Now I'm fairly new to reloading and because of all the shortage in just about everything these days and trying to find a gun range that allows shotguns without driving 2 to 3 hrs has been a challenge for me to test some of these loads. Anyways I got into a discussion with a guy about wads, I thought that whatever the wad stated like 7/8, 1 1/8, or 1 3/8 you could use whatever lead shot you wanted example if you wanted to use #8 you could, if #4 you could and even 00 buck, you could as long as it wasn't any of them one of the harder metals and as long as you didn't go over that weight. This guy was telling me that that's not correct, that let's say 7/8, 1 1/8, or whatever it may say is for the smaller shot like #6, #8, etc. and those wads can't be used for buckshot. That the wads will say that they are for the buckshot loads, now me being new searched and searched trying to verify what he said and I can't a single thing to back up my case nor can I find anything to back his case. I would appreciate it
if you could take the time to clear this up for me, and thanks for the great videos you put out, very informative.
Hey Joel! It's always about your 'Lead payload weight' As long as you're using lead shot or projectiles all you need to know is the weight of the payload. It doesn't matter on what size the shot is: #12 skeet shot or #0000 buckshot, doesn't matter as long as the weight is the same! Wade
@@BubbaRountreeOutdoors thanks for clearing that up for me and taking the time to respond out of a busy day. THANK YOU Wade
I was told by hodgdon i cant use longshot for buckshot. Hodgdon told me it was only used for heavy birdshot. So how many grains for a new 2 3/4 fiocchi hull with 9 and 10 pellet 00 buck from hornady
ua-cam.com/video/4ezCOIj73wE/v-deo.htmlsi=3qL3bOI2i17wT-rx
Do you recommend shooting copper plated buckshot through those kicks chokes or do they have to tight of a constriction
Plated shot patterns great thru the Kicks chokes! I shoot plated shot during deer season often! Wade
Bubba Rountree Outdoors thanks I'm going to get a benelli ethos for getting good grades and I was going to purchase a kicks choke but I wanted to make sure I didn't blow the choke out of the gun with plated shot
That's awesome! Congratulations on the grades buddy! Benelli is 1 of the best... The Nickel/Copper plating on buckshot is extremely thin! As long you just shoot lead shot... Kicks chokes are guaranteed for like!
Been watching your videos for a while. I don't load shotshells only handguns and rifles. I'm wanting to get into loading shells for only one load in particular. #4 buck or T for coyotes. I can't find a factory load that gives me a reliable 50 yard pattern. 5 or 6 in a 12" circle just don't seem that good. What's your take?
Ok I got this loader, primed 2 /34 hulls, longshot powder, MG 42 wads, Hornady 00 shot.I Don't know how much powder to use . Can you help please.
2.75" with 10 pellets of Hornady #00, 26 to 27 grains.
How you getting 14 #0 buck in the MG42 in a 3in Cheddite? I can only fit 12?
Can you use the Long Shot powder on reg. Laod's using #6,8 or 9 shot ?
I want a mg 42...but that tax stamp to get one is ridiculously high
I see what you did there :)
Mg42 refers to the wad not hitlers buzz saw. LoL
I have long shot powder original buffer cci mag primers mg 42 wads and sp12 wads once fired rem hulls 2 3/4 and 3inch I’m wanting to load 000 buck any info on powder charge and will I have to cut petals off thanks
So I got mg-42 wads, longshot powder, pre primed hulls from ballistic products. How many grains of powder and do I need anything else?
Hey Steve... I use 27 to 28.5 of Longshot.
I also like to use the Ballistic Products buffer. I use both the Original and the #47.
Thank you sir!
Wade, what length barrel would you recommend on a Stoeger 3000 for turkey hunting?
I think that a 26" would be a great all-around barrel length.
@@BubbaRountreeOutdoors Thanks Wade.
Hey Wade, big fan of the videos. Just started reading the comments, I usually just watch the show and don't pay attention to the comments so forgive me if you have already answered this. Im here in South Eastern NC where we also run dogs for deer. My preferred load has been commercial Winchester 3in #1 buck with 24 pellets, how come your loads only hold 18 #1s? thanks in advance
My #1 buck load is a custom load. The factory #1 doesn't have a full-length wad and they stack 8 rows of 4. My custom loads have 6 rows of 3 pellets! The factory #1 will only get out at 1000 fps and I can get over 1200 fps with my lighter pay-load! Wade
Thanks Wade, I get it now. Im gonna work some up for this season, all my loads will be #1's or #4's. I'm going to load some like factory with the gas seal and fiber wad and then some more with the MG-42 that i just ordered. Thanks for the info.
It's not how many pellets you launch , it's how many hit the target that matters . So a lighter payload that patterns tighter could actually be more effective downrange .
Nice video
Hey I live in sc and love to dog hunt but don't go to a club where are y'all located and how much for me and my dad
Visitor's fee is $35 ea. You can visit 2 times a season. We usually start taking visitors around the 3rd week in Sept. You can contact me direct here: Wade@BubbaRountree.com
How is Capt. Buster please? Stay safe!!!!
Fishing all the time! Now we only have 8 weeks before deer season opens! We are trying to get ready for that...
Use it in all my pistol loads. Don't reload for shotgun. My neck of the woods 12 gauge is readily available.........
I'm from Oklahoma I don't think I've ever seen thos hulls
I know everybody asks you to try everything, but do you ever test 16 ga. Buckshot ???
I'm working on a 16 ga buckshot video now Mark! It's been tough to find 16 ga components! I've been working on some combos with what I have. Hopefully I can get her posted sooner than later. Wade
@@BubbaRountreeOutdoors Awesome !!! I found your site and have been watching all the loading and your Dog hunts vidioes I can find ! Love the sound of the hounds ringing in the woods !!! 🦌
How high can you load sr4756 .can you go past 39 grains for a 1 1/4 ounce slug .I want to push a Diablo style slug as fast as I can without going over 11500 psi .I'm using a fiocchi 3 inch hull and a wad that fits that slug perfectly
i've never used the 4756 in a slug load. Head over to the Buck and Slug reloaders page on FB and ask those guys: facebook.com/groups/buckandslugreloaders
@@BubbaRountreeOutdoors thank you for want you do and the heads up.I was given 3 1lb cans .And don't want it to go to waste .It's a good ,hard to get powder now Was going to load some 38 specials in hbwc for target . .Just finding load data is harder now especially since it was discontinued .
How low can I go with reduced loads on powder... New toshotgun ...loads Thx. I do load rifle and pistol.....Tom
Hey Tom... I have loaded 26 grains of LS in these loads as well as the 2 3/4" loads with awesome results!
Can you run a win209 w/ the nitros in this load?
Yes u can Wes...
I'm old and weak that why I want reduced loads Thx.
No I need lube onslugs.