Jeep Commander Turbo Actuator, Chrysler 300c Turbo Boost Actuator, OM642 3 litre Diesel Merc Engine

[@_wimza_7983]

What part number for actuator should be on a Chrysler 300c crd 3.0 2007?

[@rbrood267]

I just solder the down two but it didn’t help. Should I solder all the other once as well?

[@Peter-wo4uo]

Check with a multimeter if there are connections on every wire.

[@rab2826]

Is the G number the important number on these when purchasing ??

[@matthewroxy3528]

Hi when I switch my engine on and drive I have full boost when I switch off and come back to the car switch on again I have no boost thank the car has gone into lip mold I switch off switch it back on and then I will have full boost what kind of problem be Chrysler 300c Crd 30L

[@shifty2755]

Great informative video. Thanks a lot

[@andret9653]

got e280 cdi “kangarooing”, fault code 2510 which is turbo actuator, stripped it, solder and gears are fine but i noticed that actuator had been rebuilt before, can it be wrong one then?

[@_wimza_7983]

Hi there, i have similar issue where when i floor the car (chrysler 300c crd) the car kangaroo's. Symptoms very similar to misfire on petrol engine but is a diesil. I checked turbo actuator and the gears are spot on, all connections are sturdy so can rule this out. Any other idea where i could be looking?

[@darrenbootland2316]

Might be worth looking at turbo inlet leaks. The pipe from the airbox to the turbo gets brittle over time and cracks.

[@jordij7974]

Did you need to recalibrate the actuator once you replaced yours? Or just a straight swap over part?

[@johnfeeney4636]

Just as straight swap as long as its the same model

[@granada012000]

Is the code P0046 ?

[@danwilliamson9773]

could be a realy useful video, but no volume at all cant hear a word hes saying.

[@kackalovesqhs]

Did you have it on mute? Cause there is plenty of volumn