Pretty cool, I have been thinking about building my own light board. Did you consider using Blacklight LED strips instead of simple white light LED strips? From what I understand, the BLacklight will make the Neon markers “pop” more?
Sir can you guide about real time animation on lightboard....many people are using this technique for effective teaching process....kindly make detail video on this
Yes. As more light would be trapped inside. Normally around 0.8 cm to 1.5 cm thickness is perfect. Anything below or above the range might not give the optimum results.
Dear Sir I am having the following doubts 1.I am using crystal clear glass of 8mm thickness...Is the thickness and quality of glass good enough for light board? 2.My LED strip is 10mm and my glass is only 8mm is it ok or do I need to buy a 10mm glass? 3.Do we need to stick the LED strip on all the corners of the glass (4 side) or can we put it on any one side of the glass? Please note that my LED strip is 24 watt/meter Please confirm Many thanks for your continuous support!!!
1. Yes sir even I have an 8 mm thick glass . 2. Even my led strip is of the same dimensions. No issues. 3. Preferably bottom side if you are planning to stick it to only one side. Most welcome sir.
Good Morning. I have used both. Black/whiteboard is no doubt better as we are used to it but Lightboard is something which keeps the audience glued to the lectures because of its high Interactive nature.
Ok sir thank you.may i contact you for any doubts hereafter? .sir, your guidance is adorable as you show us the way in this field. Thank you once again@@sridharciyer
Yes we can. Just make sure you flip your video horizontally by 180 degrees or else your writing would be inverted as you are writing behind the glassboard.
Thanks a lot.. Even i get some glare at times. You can try keeping a dark cloth covering the camera and extra sources of light, so that unnecessary glares can be removed.
Dear Sir For example when you write on the glass board, glass will reflect letters in the reverse manner. How these letters are shown in the proper way. Any arrangement we need to make or require some set up in the computer
Sir you actually need to flip the video horizontally by 180 degrees using any video editor. If you want to take the session Live then u can invert the video source by 180 degrees. It will do the same.
@@sridharciyer Iam not that great in technical Sir. When you say video source, since am going to use Webcam, I mean you refer that, and is it possible to reverse the webcam
@@sridharciyer Thanks Mr. Shridar. As am planning to take live classes for CMA, CA students, through webcam only, this doubt has arisen. I just request you to bring another video detailing the above technical points. You can also leave few words as to the reflector pen that need to be used in glass board Just a request
@@sankarhariharan1895 sure sir I will try to make a video on the same. I have shared the link for the neon pens you need to write on a glassboard/lightboard. You can check the video description.
Thanks a lot Sir. It should work with ordinary markers too but they might not be that bright. I have used neon Markers. You can check them here : amzn.to/2PBtSD3
@@ScienceCapsule2020 Great sir. I am still using those markers only. They are still lasting. Just a tip. Clean the glass surface after you are done . Else if you keep the ink on the glass over night then it will be a little difficult to remove those stains
No No. You need to flip your video horizontally by 180 degrees. And if you are using it on any live application like zoom, meet, teams, then you need to mirror the source.
In the market, the best neon markers available are Expo Neon ones but they are costly. So I used the following. It gives me pretty good result. You can also check the other things I use. Materials Used : Markers Used: amzn.to/2PBtSD3 Duster/Microfiber Cloth used : amzn.to/30ENNrh G Clamps Used : amzn.to/30EAV4g Mic Used : amzn.to/2DxcD3q
Sir, if the LED strip is sandwiched between the wooden frame and the glass then it will serve the purpose. Just make sure all the light should go inside the glass.
I made a full frame and glass sits inside the frame...Led is stuck on the edge of the frame instead of the edge of the glass... That was my mistake...Ill have to rework may be... Thank You
@@gurudutcotipalli9366 ohh in that case it won't work sir as the light should go diret inside the glass. You need to get the frame out. Stick the Led on the inner side of the frame and then put the glass or you can directly stick the Led strip to the glass and then surround it with the frame. Either will do
In my opinion, I first tried with plexiglass but the light was not that prominent so I switched to regular glass. It gave me much better result. And yeah 10 mm glass gives much better result but 6 mm will aso give good results. Don't go beyond 10 mm as the frame will become too heavy to carry if you want portability.
I want to make one of these, but wondered if instead of using tape to hold the LED in place... could I use a rubber u-channel to hold them in place or do you think it might not allow the LED to stay cool?
I would say try with a small patch. In my case I didn't feel any heating issue. So you can try on a small area. Keep it On for 10-15 minutes and then take a call. I don't think it will have any issues, rather I liked the idea 😃.
@@sridharciyer Thanks for the reply. I will try what you said. I was ordering my u-channel from ebay. Was going to leave a link in the event you were interested but my message gets removed because links aren't allowed.
@@sridharciyer I forgot to ask... is the glass you used "low iron"? That's what I really want but a 12.7mm thick piece of low iron that's 36 inches x 48 inches cost around $1097 USD!!!
Sir , images glass pe nahi dikhegi. Aapko software k through unko aise place karna hoga desktop screen pe ki aisa lage ki images glass k upar show ho rahi hai.
Hi. You can make use of OBS studio software or if you are planning to take live lectures on zoom you can easily invert your source video by 180 degrees and then use it for a live session. You can check this video of mine where I have discussed about the same. ua-cam.com/video/fLnEFfh5s_s/v-deo.html
@@ratnadeepdas4102 yes. Just make sure it's completely clear. Not the opaque ones. I got it from a local market. I simply asked the shopkeeper to provide me a clear glass of the given dimensions.
I have made a glass board using a polycarbon sheet , (3mm thickness) but still I Iam not satisfied, I want to superimpose images on screen by projector, images are not clear, thickness of of glass is important or not? How much area u have used black cloth
Yes The thickness is important. My 1st lightboard I made was of same thickness. Even I wasn't satisfied with that one so I built this one. This one is made of clear glass of 10 mm thickness as mentioned in the video. You can superimpose images using software called OBS studio. Many Tutorials are available online how to add images to Lightboard. You can try that. The black cloth I used is a normal single bed sheet cloth which I hav pinned up to my wall.
@@irfanparray5795 You can use any neon markers. There are many brands available. You can go for the expo neon markers or the one I have mentioned in the video description section, they are a little cheaper and does the job well.
@@subratachakraborty8726 yes it's possible . Kindly use OBS studio software and then you can use it to conduct live lectures using your light board. You can check this video of mine where I have precisely discussed about it only. ua-cam.com/video/fLnEFfh5s_s/v-deo.html
@@sridharciyer sir i would like to teaching in light board sir can u help me sir i am in final year of engineering I from universal college of engineering sir really that was amazing i make it sir please help me
Yes Kajal. What help do you want exactly? As I have mentioned all the steps in detail here. I have shared the various materials required too. Kindly let me know if you want to know abt anything in specific.
Hello I have 2 issues on my lightboard 1.all neon colours is seen as green colour when written...Orange /blue when used looks like green 2.Letters when written on the middle of the glass is not that clear... Please advise
1. It actually depends on the glass used. Even I also get a slight tint of green. So I use bright colours such as neon pink and neon green. It also depends on what colour LED you have used. 2. That's something new, as I haven't faced any such issue. I guess the insides of the glass are not getting illuminated properly. Try covering up the back of the LED strips using black tape or any black chart paper to avoid light escaping the glassboard. That should solve the issue. If your glassboard is lit up properly it should actually solve both your issues. Regards
Sir, I have done light board set up by following your video but I am not getting as clear as your light board, can you please help me because I spent lot of money but I can't able to use
Sir the main thing is, the lighting should be proper. Make sure that the led strip is properly covered so that no light leaves out of your lightboard. Secondly when you are recording your videos, try to set focus on your light board and your face should be visible.
Hello. For a lightboard or glassboard, neon markers are best suited. They are a little costlier but effective and long lasting. I have these. amzn.to/2PBtSD3
अस्सलामु अलैकुम वा रहमतुल्लाह भाई. ओर भाई क्या हाल? भाई, हम व्हाइट बोर्ड पर लिखा हुआ डस्टर से मिटा देते हैं। लेकिन मेरा सवाल यह है कि हम लाइट बोर्ड पर लिखे अक्षरों को क्या मिटा सकते हैं? थोड़ा सा कहते तो काम आता.
Ji. Light board par bhi hum marker se hi likhte hai. Toh use bhi duster se ya fir kisi bhi kapde ki madad se mita sakte Hai. Thoda sa geela kapda hua toh aur behtar.
सर, अगर हम 6 inches x 4 inches साईजमे light बोर्ड बना लेते है तो कितना खर्चा आ सकता है ? and if I use daily 2 hours, then how mcuh tentative marker expenses I have to consider?
Sir , in that case, glass ka hi coating costing change hoga. Par ha as glass heavy ho jayega toh iron stand thoda aur better quality ka lena padega else weight nahi utha payega. If possible you can contact a carpenter and ek permanent frame hi lagwa sakte ho aap with a wheeler, depends on the budget. According to your usage markers can last for 4-5 months . 1 time cost approx 1000-1200 hai.
@@sridharciyer Thank You Sir. Surely I need fixed wooden frame. Actually I have a strong wooden table to which I will like to attach frame. I am confuse about markers. Tell me about white color markers (if possible share link) having greater life
Yes. A permanent wooden frame and table would be a brilliant idea. I use these markers. Expo Neon Dry Erase markers. During the lockdown these markers were very costly, around 2000 rupees. Now they are available for around 650-700. Best time to purchase them. I am not sure about the white colour, preferred colours would be the flourescent neon colours. They will look brighter. As glass has its natural greenish tint, even white marker would appear greenish. Kindly find the link. amzn.to/3lzHXkg
I used neon markers for writing on the glassboard. They are available on all leading ecommerce stores. You can check the video description for a link to the same.
Sir you need to decide the size of the lightboard. 1. Either a table top or a full size one 2. Then you would need LED strip 3. A frame to support the glass 4. Clear Glass 5. Neon Markers 6. Some light to illuminate your face.
In the market, the best neon markers available are Expo Neon ones but they are costly. So I used the following. It gives me pretty good result. You can also check the other things I use. Materials Used : Markers Used: amzn.to/2PBtSD3 Duster/Microfiber Cloth used : amzn.to/30ENNrh G Clamps Used : amzn.to/30EAV4g Mic Used : amzn.to/2DxcD3q
@@Kidscartoonclub11 highlighters are not that bright with glassboards. Have tried it. Didn't get the desired brightness. They are too dull on the glassboard as they don't absorb the light properly.
Sir I usually record my videos on my mobile phone only. Very rarely I use my DSLR. If you are planning to use your mobile phone only then you can use Open Camera app and adjust the exposure settings. Keep the value low and lock the exposure. Focus on the lightboard. Some trial and error will be needed. You will eventually get the hang of it. Do let me know if u need any further assistance. Thanks
@@transedu-learninauniqueway992 yes you can use a microfibre cloth or a slightly wet cloth to wipe them off. But don't keep the ink on the glassboard overnight or for a long time. Then it might take some efforts to wipe them off.
Hi, I use these markers amzn.to/2PBtSD3 . These are decent enough markers and long lasting too. If you want even better ones, you can check the expo neon markers too. www.amazon.in/dp/B0033AGVVG/ref=cm_sw_r_cp_apa_fabc_MH6C4YDZV94FVZ8G3A6Z?_encoding=UTF8&psc=1
Hii, I have kept my mobile phone on a tripod at 2-3 feet distance from the screen. I have used a black cloth behind me to reflect off the extra lights and once the recording is complete, you can use any video editor to flip the video horizontally by 180 degrees.
@@manjulak866 you can click on the screen from either the droidcam app or the windows droidcam client. You can either select autofocus or manual. Try to keep the background as dark as possible
You can use them together. There's an app called droidcam using which you can connect your mobile phone with your laptop as a webcam. Then you can use any live video conferencing app like zoom, gmeet etc to conduct live lectures.
Actually sir I dont make lightboards to sell. I made this table top lightboard for my classes. I can give you the direct links of the items you would need to make your own lightboard at a very cheap price. Kindly mail me at c.sridhar89@gmail.com. will send you the details there. Thanks
Post Video zyada kuch editing ki zarurat nahi padti lightboard videos me. Bas jo video banta hai aapka usko 180 degree horizontal flip karna hota hai . Kisi bhi video editing app jaise ki camtasia, Adobe premiere Pro, powerdirector etc me ho jayega.
@@DAVianPRASHANTSIR maine camtasia studio use kia hai par actually woh paid software hai isliye maine vdo banaya nahi. Kuch achha free software dhundke main uspe ek vdo bana dunga.
Aap mera yeh latest video dekh sakte hai. Isme Maine bataya hai kaise bina editing k free software use karke aap light board pe videos bana sakte hai. ua-cam.com/video/fLnEFfh5s_s/v-deo.html
Uske liye OBS studio software use karna padta hai. Jisme pehle se prepared ek ppt play karna padta hai jiske slideshow ko aap wireless mouse se control kar sakte ho
Excellent work. Trust me i landed here by accident but it was worth it. Engineering it its best 👍💯
Thank you so much bro. ☺️☺️
Very well janab...a cheapest and useful light board.. you Cleared about the stand excellently...love from Pakistan
Thanks a lot sir ☺️
Pretty cool, I have been thinking about building my own light board. Did you consider using Blacklight LED strips instead of simple white light LED strips? From what I understand, the BLacklight will make the Neon markers “pop” more?
Thanks. Yeah I used the white led strips. Would definitely want to try the blacklight led strip. Need to research a bit though.
I was searching for a good teaching setup from many days... ur video is interesting
Thank you so much ☺️
Sir can you guide about real time animation on lightboard....many people are using this technique for effective teaching process....kindly make detail video on this
Sure. I will make a detailed video on the same. Thanks
Wonderful stuff brother can I use wooden frame to fix glass. any disadvantages???
Thank you so much brother. Yes absolutely. A wooden frame is a much better option. It will keep the lightboard sturdy as well.
@@sridharciyer thank you Brother 🥰
@@khareemshaik3453 Most welcome bro
Bhai supr video.... and thanx for ur patience...becoz sabhi logoko reply diye.. tq... i lyk ur video
Thank you so much bro ☺️
Is it so that the thicker the glass or plexiglass the better the lightboard will be?
Yes. As more light would be trapped inside. Normally around 0.8 cm to 1.5 cm thickness is perfect.
Anything below or above the range might not give the optimum results.
@@sridharciyer Great! Thank you for your quick reply, I appreciate it.
You are most welcome ☺️
Great sir, first of all thanks to you for such amazing videos which help us a lot .
Thank you so much for such kind words ☺️
Dear Sir
I am having the following doubts
1.I am using crystal clear glass of 8mm thickness...Is the thickness and quality of glass good enough for light board?
2.My LED strip is 10mm and my glass is only 8mm is it ok or do I need to buy a 10mm glass?
3.Do we need to stick the LED strip on all the corners of the glass (4 side) or can we put it on any one side of the glass?
Please note that my LED strip is 24 watt/meter
Please confirm
Many thanks for your continuous support!!!
1. Yes sir even I have an 8 mm thick glass .
2. Even my led strip is of the same dimensions. No issues.
3. Preferably bottom side if you are planning to stick it to only one side.
Most welcome sir.
Sir, good morning.which would be better? Using black /white board or light board for effective teaching?
Good Morning. I have used both. Black/whiteboard is no doubt better as we are used to it but Lightboard is something which keeps the audience glued to the lectures because of its high Interactive nature.
Ok sir thank you.may i contact you for any doubts hereafter? .sir, your guidance is adorable as you show us the way in this field. Thank you once again@@sridharciyer
@@madhavasolutions2431 Thanks a lot . Yes you can definitely ask me if you face any doubts
Sir, can we conduct live class through zoom on this glass board
Yes we can. Just make sure you flip your video horizontally by 180 degrees or else your writing would be inverted as you are writing behind the glassboard.
Hai ...great video ...I've tried with a 5 mm glass and iam getting glare ...how can this be removed
Thanks a lot.. Even i get some glare at times. You can try keeping a dark cloth covering the camera and extra sources of light, so that unnecessary glares can be removed.
Can it works on live class take with mobile? If yes then which camera will works fr this?
Hello sir....
zeeshan from okara, pakistan. I want to ask about the markers you used in the video.
Hello Sir,
I use these markers. Expo Neon Dry Erase markers. Flourescent Neon Markers for glassboards.
Kindly find the link. amzn.to/3lzHXkg
Great 👍🏻
Thanks ☺️
Dear Sir
For example when you write on the glass board, glass will reflect letters in the reverse manner. How these letters are shown in the proper way.
Any arrangement we need to make or require some set up in the computer
Sir you actually need to flip the video horizontally by 180 degrees using any video editor.
If you want to take the session Live then u can invert the video source by 180 degrees. It will do the same.
@@sridharciyer Iam not that great in technical Sir. When you say video source, since am going to use Webcam, I mean you refer that, and is it possible to reverse the webcam
No sir you can't use a webcam with the lightboard. You can use your mobile phone camera
@@sridharciyer Thanks Mr. Shridar.
As am planning to take live classes for CMA, CA students, through webcam only, this doubt has arisen.
I just request you to bring another video detailing the above technical points. You can also leave few words as to the reflector pen that need to be used in glass board
Just a request
@@sankarhariharan1895 sure sir I will try to make a video on the same.
I have shared the link for the neon pens you need to write on a glassboard/lightboard. You can check the video description.
Very nicely explained sir.... may I know which marker is used? Can ordinary marker serves the purpose?
Thanks a lot Sir. It should work with ordinary markers too but they might not be that bright. I have used neon Markers. You can check them here :
amzn.to/2PBtSD3
@@sridharciyer thanks a lot... I booked from your link sir....
@@ScienceCapsule2020 Great sir. I am still using those markers only. They are still lasting. Just a tip. Clean the glass surface after you are done . Else if you keep the ink on the glass over night then it will be a little difficult to remove those stains
@@sridharciyer sir can I ask queries if any while setting glass board?. All d very best for better growth of your channel
@@ScienceCapsule2020 yes sir definitely. Feel free to ask if you are having any doubts. Thanks a lot ☺️
Great idea"
Thanks a lot ☺️
Sorry to bother, should you write backwards on the glass?
No No. You need to flip your video horizontally by 180 degrees. And if you are using it on any live application like zoom, meet, teams, then you need to mirror the source.
@@sridharciyer thanks man, 🙏
Most welcome 😃
Loved your content and also consistency to come up with quality content viodeos.....😇😇
Thank You so much Amit ☺️
Excellent
Thank you so much Mrudul ☺️☺️
May I know do you use a special kind of markers to write on the glass?
In the market, the best neon markers available are Expo Neon ones but they are costly.
So I used the following. It gives me pretty good result. You can also check the other things I use.
Materials Used :
Markers Used: amzn.to/2PBtSD3
Duster/Microfiber Cloth used : amzn.to/30ENNrh
G Clamps Used : amzn.to/30EAV4g
Mic Used : amzn.to/2DxcD3q
I have a glass in a wooden frame....
Can we put the led strip on the wooden frame
Instead of on the edge of the glass
Please guide
Sir, if the LED strip is sandwiched between the wooden frame and the glass then it will serve the purpose. Just make sure all the light should go inside the glass.
I made a full frame and glass sits inside the frame...Led is stuck on the edge of the frame instead of the edge of the glass...
That was my mistake...Ill have to rework may be...
Thank You
@@gurudutcotipalli9366 ohh in that case it won't work sir as the light should go diret inside the glass. You need to get the frame out. Stick the Led on the inner side of the frame and then put the glass or you can directly stick the Led strip to the glass and then surround it with the frame. Either will do
Can we stick the LED on the top side of the glass ONLY ONE SIDE instead of all the sides...
May be a higher power LED
Please advise if it works sir
@@gurudutcotipalli9366 yeah that should be fine as you would be having the wooden frame so light won't leave out of it.
Can we use ordinary glass amd marker?
It should work but they might not be that bright. I have used neon Markers. You can check them here :
amzn.to/2PBtSD3
Does the glass reflect light better because it's glass or because it's thicker (10mm vs 6mm) or both?
In my opinion, I first tried with plexiglass but the light was not that prominent so I switched to regular glass. It gave me much better result.
And yeah 10 mm glass gives much better result but 6 mm will aso give good results. Don't go beyond 10 mm as the frame will become too heavy to carry if you want portability.
I want to make one of these, but wondered if instead of using tape to hold the LED in place... could I use a rubber u-channel to hold them in place or do you think it might not allow the LED to stay cool?
I would say try with a small patch. In my case I didn't feel any heating issue. So you can try on a small area. Keep it On for 10-15 minutes and then take a call. I don't think it will have any issues, rather I liked the idea 😃.
@@sridharciyer Thanks for the reply. I will try what you said. I was ordering my u-channel from ebay. Was going to leave a link in the event you were interested but my message gets removed because links aren't allowed.
@@BeastMortThe ohh you can send the links on my email id. c.sridhar89@gmail.com
@@sridharciyer Email sent. Good luck :)
@@sridharciyer I forgot to ask... is the glass you used "low iron"? That's what I really want but a 12.7mm thick piece of low iron that's 36 inches x 48 inches cost around $1097 USD!!!
Dear sir, image mirror par dikhegi. So that i could point on the images features
Sir , images glass pe nahi dikhegi. Aapko software k through unko aise place karna hoga desktop screen pe ki aisa lage ki images glass k upar show ho rahi hai.
Aap yeh wala video dekhke ek bar idea le sakte hai.
ua-cam.com/video/fLnEFfh5s_s/v-deo.html
Sir please tell me how to fix my mobile camera fr live class?
Because I see the mirror image in the live class if I write on glass board.
Hi. You can make use of OBS studio software or if you are planning to take live lectures on zoom you can easily invert your source video by 180 degrees and then use it for a live session. You can check this video of mine where I have discussed about the same.
ua-cam.com/video/fLnEFfh5s_s/v-deo.html
Thank you sir for helping me
Most welcome ☺️
Dear sir
I need guidance to set up the board....but confused about choosing the glass
Hii. You can opt for normal window glass. It will work fine. Minimum thickness must be 6 to 8 mm for better visibility.
@@sridharciyer window glass mean which we use showcase r8 ?
@@ratnadeepdas4102 yes. Just make sure it's completely clear. Not the opaque ones. I got it from a local market. I simply asked the shopkeeper to provide me a clear glass of the given dimensions.
@@sridharciyer thank you very much sir...
@@ratnadeepdas4102 most welcome sir
Sir if you are behind the glass your words must be in reverse order right ?
Yes true. We need to simply flip the video horizontally by 180 degrees during the editing process. It does the trick.
@@sridharciyer btw sir loving your TCS video series Thank you so much sir
@@sarastemkar7835 Glad to know that. You are most welcome ☺️
What kind of markers used bro??
I used expo neon glassboard markers.
Excellent work
Thank you so much mam ☺️
I have made a glass board using a polycarbon sheet , (3mm thickness) but still I Iam not satisfied, I want to superimpose images on screen by projector, images are not clear, thickness of of glass is important or not? How much area u have used black cloth
Yes The thickness is important. My 1st lightboard I made was of same thickness. Even I wasn't satisfied with that one so I built this one. This one is made of clear glass of 10 mm thickness as mentioned in the video.
You can superimpose images using software called OBS studio. Many Tutorials are available online how to add images to Lightboard. You can try that.
The black cloth I used is a normal single bed sheet cloth which I hav pinned up to my wall.
Sir..what is the size of the lightboard ? Length and width ?
Hello Sir. Mine is a Tabletop setup. It is 3 feet in width and 2 feet in height.
@@sridharciyer thank you sir..for quick reply
@@knowledgekattamarathi7177 most welcome sir
Glass u used ....is it simple plane window glass.
Yes its a plain window glass only. I didn't go for the low iron one as it was a little on the expensive side.
@@sridharciyer ....which markers I have to use while writing on it.
@@irfanparray5795 You can use any neon markers. There are many brands available. You can go for the expo neon markers or the one I have mentioned in the video description section, they are a little cheaper and does the job well.
@@sridharciyer thanku very much sir.....love u.....I am overwhelmed by ur content and generosity.
Thanku very much
@@irfanparray5795 Really glad to hear that sir. Thanks a lot ☺️☺️
what type of glass do you use? could use window glass?
Yeah a plain window glass should work. Just make sure it is clear.
@@sridharciyer thank you much.
Most welcome
Sir , one question
All the writing looks the other way around
You simply need to flip the video horizontally by 180 degrees in any video editing software.
Actually I want this writing in live zoom meeting
It is possible ??
@@subratachakraborty8726 yes it's possible . Kindly use OBS studio software and then you can use it to conduct live lectures using your light board.
You can check this video of mine where I have precisely discussed about it only.
ua-cam.com/video/fLnEFfh5s_s/v-deo.html
Thank you so much 🙏
@@subratachakraborty8726 You are most welcome.
Really sir this is amazing
Thank you so much ☺️
@@sridharciyer sir i would like to teaching in light board sir can u help me sir i am in final year of engineering I from universal college of engineering sir really that was amazing i make it sir please help me
Yes Kajal. What help do you want exactly? As I have mentioned all the steps in detail here.
I have shared the various materials required too. Kindly let me know if you want to know abt anything in specific.
what are u using to write on the lightboard?
Its a neon marker. Easily available in stationary stores or you can get them online too.
Thank you 👍😊
Most welcome. You can check the video description if you want the Amazon links.
Is it normal off the shelf 10mm glass
Yes it's a normal glass only. Still I would suggest. If you have markers with you, kindly test it on the glass before purchasing.
It is really amazing 👍👍
Thank you so much ☺️
I have black glass..can i use it as a lightboard??...will it work properly as compare to white glass??
You can try with white LED strips and white neon markers. Not sure though but you can try and let me know if it works.
@@sridharciyer thank you for your response sir...i will definitely inform you if it worked or not...thank you for your suggestions..
Most welcome sir.
Thanks buddy
You are most welcome ☺️
Brilliant stuff👍👍👍
Thank you so much mam☺️☺️
Hello
I have 2 issues on my lightboard
1.all neon colours is seen as green colour when written...Orange /blue when used looks like green
2.Letters when written on the middle of the glass is not that clear...
Please advise
1. It actually depends on the glass used. Even I also get a slight tint of green. So I use bright colours such as neon pink and neon green. It also depends on what colour LED you have used.
2. That's something new, as I haven't faced any such issue. I guess the insides of the glass are not getting illuminated properly. Try covering up the back of the LED strips using black tape or any black chart paper to avoid light escaping the glassboard. That should solve the issue.
If your glassboard is lit up properly it should actually solve both your issues.
Regards
Appreciate your quick response...Thank You Sir and Keep doing great work!!!
👍👍👍
@@gurudutcotipalli9366 Thank you so much ☺️
Send led light link sir... what is the thickness of ledlight strip
Sir you can buy the LED strip light from the following link
amzn.to/3bFOR1J
Thickness of my led strip was 10 mm and it was 5 metre long
Sir, I have done light board set up by following your video but I am not getting as clear as your light board, can you please help me because I spent lot of money but I can't able to use
Sir the main thing is, the lighting should be proper. Make sure that the led strip is properly covered so that no light leaves out of your lightboard. Secondly when you are recording your videos, try to set focus on your light board and your face should be visible.
thank you!
You are most welcome. ☺️
Which company glass you got sir ji 🙏
I got it from a local glass vendor. Just mentioned the dimensions. He got it ready for me.
Hey Sri , Very good content man 👍👍
Thank you so much bro 🤗
Hi sir!
What about the markers?
Hello. For a lightboard or glassboard, neon markers are best suited. They are a little costlier but effective and long lasting.
I have these.
amzn.to/2PBtSD3
@@sridharciyer thanks a lot Sir!
@@MohamedSajath07 you are most welcome
अस्सलामु अलैकुम वा रहमतुल्लाह भाई. ओर भाई क्या हाल?
भाई, हम व्हाइट बोर्ड पर लिखा हुआ डस्टर से मिटा देते हैं। लेकिन मेरा सवाल यह है कि हम लाइट बोर्ड पर लिखे अक्षरों को क्या मिटा सकते हैं?
थोड़ा सा कहते तो काम आता.
Ji. Light board par bhi hum marker se hi likhte hai. Toh use bhi duster se ya fir kisi bhi kapde ki madad se mita sakte Hai. Thoda sa geela kapda hua toh aur behtar.
@@sridharciyer धन्यवाद भाई🥀🥀🥀🥀
Most welcome
सर, अगर हम 6 inches x 4 inches साईजमे light बोर्ड बना लेते है तो कितना खर्चा आ सकता है ? and if I use daily 2 hours, then how mcuh tentative marker expenses I have to consider?
Sir , in that case, glass ka hi coating costing change hoga.
Par ha as glass heavy ho jayega toh iron stand thoda aur better quality ka lena padega else weight nahi utha payega.
If possible you can contact a carpenter and ek permanent frame hi lagwa sakte ho aap with a wheeler, depends on the budget.
According to your usage markers can last for 4-5 months . 1 time cost approx 1000-1200 hai.
@@sridharciyer Thank You Sir. Surely I need fixed wooden frame. Actually I have a strong wooden table to which I will like to attach frame.
I am confuse about markers. Tell me about white color markers (if possible share link) having greater life
Yes. A permanent wooden frame and table would be a brilliant idea. I use these markers. Expo Neon Dry Erase markers. During the lockdown these markers were very costly, around 2000 rupees. Now they are available for around 650-700. Best time to purchase them.
I am not sure about the white colour, preferred colours would be the flourescent neon colours. They will look brighter.
As glass has its natural greenish tint, even white marker would appear greenish.
Kindly find the link. amzn.to/3lzHXkg
Plz show how you placed mobile camera
I used a tripod in front of the glass and adjusted it so that my entire glassboard is visible.
Amazing sir 👍
Thank yo so much Tejaswini
What kind of marker shall we use
You need neon markers for writing on the glassboard. You can check the description section for the marker I use.
Super sir
Thanks a lot mam☺️
Gracias compa!
muy bienvenido amigo ☺️
What kind markers did u use?
I used neon markers for writing on the glassboard. They are available on all leading ecommerce stores.
You can check the video description for a link to the same.
Which marker did u use in this vdo
The one mentioned in the description
amzn.to/2PBtSD3
What kind of marker we have to use ?
Neon markers are best suited. Dry erase neon markers. You can check the link in the video description.
@@sridharciyer Thank you sir 😀
gr8.sir.
Thank you so much ☺️
Sir i want to make a light board.. Ples guide me
Sir you need to decide the size of the lightboard.
1. Either a table top or a full size one
2. Then you would need LED strip
3. A frame to support the glass
4. Clear Glass
5. Neon Markers
6. Some light to illuminate your face.
Sir glass ke bare me aur kuchh bataye please.. Example jese konsa type ka glass aur kanha use hota he
Sir clear glass chahiye. Transparent. Glass pe hi poora lightboard based hai. Usi pe led lights lagte hai.
what is marker name you use
In the market, the best neon markers available are Expo Neon ones but they are costly.
So I used the following. It gives me pretty good result. You can also check the other things I use.
Materials Used :
Markers Used: amzn.to/2PBtSD3
Duster/Microfiber Cloth used : amzn.to/30ENNrh
G Clamps Used : amzn.to/30EAV4g
Mic Used : amzn.to/2DxcD3q
we can use highlighter
@@Kidscartoonclub11 highlighters are not that bright with glassboards. Have tried it. Didn't get the desired brightness. They are too dull on the glassboard as they don't absorb the light properly.
@@sridharciyer thxxx dear
@@Kidscartoonclub11 most welcome ☺️☺️
Great video 🤘
Thank you so much ☺️
THANKS FOR THE USEFUL INFORMATIONS,
KINDLY EXPLAIN THE CAMERA DETAILS LIKE CAMERA BRAND AND SETTINGS SIR.
THANK YOU...
Sir I usually record my videos on my mobile phone only. Very rarely I use my DSLR.
If you are planning to use your mobile phone only then you can use Open Camera app and adjust the exposure settings.
Keep the value low and lock the exposure. Focus on the lightboard. Some trial and error will be needed. You will eventually get the hang of it.
Do let me know if u need any further assistance. Thanks
Which marker you are using sir?
Sir I am using neon markers as the normal highlighter pens are not that bright.
@@sridharciyer where to buy it?also tell me about price.
I used this. www.amazon.in/dp/B07W6WH5NH?ref=ppx_pop_mob_ap_share .
It's available for 450 rupees
@@sridharciyer offline neo marker nhi mil skta kya??
Maine kuch shops me enquiry ki thi. They said ki costly padega as shortage hai.
Can I know the name of the marker??
I used these : amzn.to/2PBtSD3
Thank you for the information
@@transedu-learninauniqueway992 most welcome ☺️
Are these markers ease to wipe off
@@transedu-learninauniqueway992 yes you can use a microfibre cloth or a slightly wet cloth to wipe them off. But don't keep the ink on the glassboard overnight or for a long time. Then it might take some efforts to wipe them off.
Sir,may I know your teaching subject?
Mam I teach cryptography and system security, Digital Forensics , Theory of Computation or Automata Theory.
Sir which marker u use
Hi, I use these markers amzn.to/2PBtSD3 . These are decent enough markers and long lasting too.
If you want even better ones, you can check the expo neon markers too.
www.amazon.in/dp/B0033AGVVG/ref=cm_sw_r_cp_apa_fabc_MH6C4YDZV94FVZ8G3A6Z?_encoding=UTF8&psc=1
Thank sir,,from odisha
@@subhashreesingh3769 Most welcome Sir. ☺️
Prettieeee Cooooooool 👍🙂
Thank You so much☺️
How you recording
Hii, I have kept my mobile phone on a tripod at 2-3 feet distance from the screen.
I have used a black cloth behind me to reflect off the extra lights and once the recording is complete, you can use any video editor to flip the video horizontally by 180 degrees.
@@sridharciyer But in live class are you using droid cam in the phone to connect phone camera with obs
@@manjulak866 yes. I use droidcam and connect it to obs.and flip the video source by 180 degrees horizontally
@@sridharciyer yeah, 👍 but when i tried the droid cam the focus is not working as i wish
@@manjulak866 you can click on the screen from either the droidcam app or the windows droidcam client. You can either select autofocus or manual. Try to keep the background as dark as possible
Sir,,, मिटालने मे परेशानी आ रही है.
क्या करें अब??
Mirror साफ करने बाला spray ले लू??
कोनसा बाला लेना है spray?? Market मे to बहुत सारे है.
Jisse specs saaf karte hai woh spray hua toh bhi chalega. Cotton ka kapda use kariye else scratches aa sakte hai glass pe
Sir can you help me actually I want to make a light board
Yes sir. Have you gone through the video, do you need any help?
Yes sir I watch your videos
Kindly let me know how may I help you.
starting vedio adding you 1 vedio how to add and any softwer is here sir
Could you please elaborate?
महाश्य, ये जी क्लैंप, ओर गिलास होल्डिंग स्टैंड कहा से मिल जाएगा
G Clamps kisi bhi hardware store se mil jayega else Amazon se bhi manga sakte hai. Description box me link dia hai maine.
Aur frame ya stand jo hai woh maine local ek workshop se banwaya tha. Jaha steel ya aluminum ka kaam hota ho woh bana ke de denge 300-400 Rupees me.
👍👍👍
Thank you so much☺️
@
For live online classes using lightboard and your android phone
You can use them together. There's an app called droidcam using which you can connect your mobile phone with your laptop as a webcam. Then you can use any live video conferencing app like zoom, gmeet etc to conduct live lectures.
Steel stand ku kitna money huyatha
Kuch 500 tak hua tha with black paint done.
🤩🤩🤩🤩🤩
☺️☺️
👌👍👍👍
Thankuuu
अब किसी वीडियो मैं लाइट सेटअप भी अच्छे से दिख दिजीये
Zarur. Aage ek video me main light settings bhi dikha dunga . Thanks
Otherwise vvvv nice v
I would like to buy this. Pls give your contacts for the same
Actually sir I dont make lightboards to sell. I made this table top lightboard for my classes.
I can give you the direct links of the items you would need to make your own lightboard at a very cheap price.
Kindly mail me at c.sridhar89@gmail.com. will send you the details there.
Thanks
ओर आपने पोस्ट वीडियो एडीटिंव के बारे मे बोला था, वो कव बात रहे ह
Post Video zyada kuch editing ki zarurat nahi padti lightboard videos me. Bas jo video banta hai aapka usko 180 degree horizontal flip karna hota hai .
Kisi bhi video editing app jaise ki camtasia, Adobe premiere Pro, powerdirector etc me ho jayega.
@@sridharciyer पर आपने किसी सॉफ्टवेयर का जिक्र किया था
@@sridharciyer तो इस पर भी एक वीडियो बना दिजीये
@@DAVianPRASHANTSIR maine camtasia studio use kia hai par actually woh paid software hai isliye maine vdo banaya nahi. Kuch achha free software dhundke main uspe ek vdo bana dunga.
Aap mera yeh latest video dekh sakte hai. Isme Maine bataya hai kaise bina editing k free software use karke aap light board pe videos bana sakte hai.
ua-cam.com/video/fLnEFfh5s_s/v-deo.html
ua-cam.com/video/9vcrllaEGek/v-deo.html
Yeh esa real time animation kese chalega sir??
Uske liye OBS studio software use karna padta hai.
Jisme pehle se prepared ek ppt play karna padta hai jiske slideshow ko aap wireless mouse se control kar sakte ho
@@sridharciyer thanks lekin sir is video me to yeh direct mobile phone se animation chala rhe hai
@@sridharciyer link pr click kijiye video dekhiye ek baar plzz,,, jb aap free ho
I will check it out sir and show you how to do it soon.
@@sridharciyer thnks sir