Canon ix6820 with PrintFab RIP software for Screen Printing

Поділитися
Вставка
  • Опубліковано 8 вер 2024
  • In this video I wil demostrate how to setup the Canon IX6820 with the PrintFab Rip software on a windows machine. This same setup will work for other printers as well.

КОМЕНТАРІ • 21

  • @caroldonovan8802
    @caroldonovan8802 2 місяці тому

    Great help, went way way too fast, but very helpful. Thank you.

  • @d.e.m.p.s.e.y
    @d.e.m.p.s.e.y Місяць тому

    I have an epson 1430, the special settings screenprinting isn't showing up in the other section, but I want all cartidges to print black. Is there a way to get that menu to show up?

  • @kimmiesrhythms
    @kimmiesrhythms 5 років тому +1

    Thank you so much for developing this software. Do you have a tutorial for the Mac setup? I haven’t looked through your videos yet. You have a new sub btw. Thanks again!

    • @bryanray107
      @bryanray107 Рік тому

      yes, we've done few tutorials for a mac. They may be for another printer but the settings should be similar.

  • @hetrebleu5708
    @hetrebleu5708 3 роки тому +1

    hi, thanks for you video, can we use PrintFab software with canon pro 4100 printer

  • @saga083
    @saga083 3 роки тому

    Hello, is it possible to use only the large black or pigmented cartridge? or even use the 2 black together, is there such a setting?

  • @mikeviet4790
    @mikeviet4790 3 роки тому

    Thanks Ryan its a good video. I tried all the settings as you mentioned for ix6820 on windows pc but I am not able to get darker black. I increased the dpi to 9600 and set media to Transparent but there is no difference. However I noticed one thing that in the print preview window the media shows as plain paper even when I selected the media as Transparent.
    Is there any other place where I have to change it?

  • @LuzYSonidoParaiso
    @LuzYSonidoParaiso 2 роки тому

    We’re can I find that test print you showed in this video?

  • @IOxOI_art
    @IOxOI_art 4 роки тому

    Thank you for the video. How do you use the black pigment cartridge on this printer? I can only activate CMY and K in the all black settings..

    • @bryanray107
      @bryanray107 4 роки тому +1

      Good question. I've noticed this before and decided to do a test. I filled a PGBK cartridge with magenta ink to see when it prints from that cartridge vs the BK cartridge and couldn't isolate it with either the Canon drivers or Printfab. Setting up multiple black images in Illustrator I couldn't get an object to print with the PGBK cartridge as the image should of printed in magenta ink, but only printed black. There is no way to isolate the PGBK (XL black cartridge) on the ix6820 in PrintFab. You can control the smaller BK cartridge with the multi-black feature turned on then enable or disable that cartridge. The "single black" option also only pulls from the smaller BK cartridge. I'm not sure why this is, I'll ask the developers and post the reply when I hear back. - Bryan

    • @IOxOI_art
      @IOxOI_art 4 роки тому

      ​@@bryanray107 Thank you very much for the quick and thorough answer :)
      Lets us know the answer from the developers.

  • @chasman20
    @chasman20 4 роки тому

    I followed the instructions but I cannot get the black to print dark enough. I have black in all the cartridges. What are the settings to get the black to print very dark.

    • @bryanray107
      @bryanray107 4 роки тому

      Under the main tab , for paper choose transparency or Photo Platinum pro (darker). Resolution choose 2400 or 9600 dpi. Under options tab (pc)or special settings screen printing (mac) >halftone screen mode choose "multi black" . Under screen ink saturation leave it at 200%. You can always adjust this higher or lower to increase or decrease ink coverage. That should be it. If it's not dark at this point increase the screen ink saturation % or your ink may be for photo printing and translucent in that case try our canon formulation ink. It's super black. www.filmdirectonline.com/copy-of-fd-dye-black-ink-choose-size/

  • @hillxerxes7044
    @hillxerxes7044 3 роки тому

    can it support IX6780?

  • @thiniceking12
    @thiniceking12 4 роки тому

    I’m interested in this rip software. Does it work just as good as Accurip?
    I do manual color seps on PS and wish i sad some type of rip to get cleaner halftones.

    • @bryanray107
      @bryanray107 Рік тому

      yes, and there is no yearly fee.

  • @GeneKreuzJr
    @GeneKreuzJr Рік тому

    I am having trouble with the Mac version of PrintFab that I bought last month. It works great except that I cannot seem to get my custom settings to stay. It's a real pain having to set all of the options for every page that I have to print. Can you help me? Thanks!

    • @bryanray107
      @bryanray107 Рік тому

      If you recently updated to Ventura you may want to see if Apple has an update as there was an issue with Ventura not saving presets. It's an OS issue.

    • @GeneKreuzJr
      @GeneKreuzJr Рік тому

      @@bryanray107 I'll so that, thanks!!!

    • @GeneKreuzJr
      @GeneKreuzJr Рік тому

      BTW I'm am on 13.1.

  • @eduardoesttuardescotocruz5248
    @eduardoesttuardescotocruz5248 4 роки тому

    PrintFab RIP for canon ipf770