FlipPac Build - Part 3

I talk about the mistakes made in part 2 of the Flippac build and show this weeks progress. The beds/storage cabinets are built and the interiors walls are sheathed.
Like, subscribe and flow along with the build.
Amazon Associate Links for products used in this build
(As an Amazon Associate I earn from qualifying purchases.)
Duplex Cable, 14/2 AWG amzn.to/3OCaEfm
50 Amp Plug amzn.to/49dulCO
Wire Connectors Nuts Kit amzn.to/491gkYF
Fiberglass Cloth Tape amzn.to/3STsM6Z
Bubble Paddle Tool amzn.to/3w9WrAe
Chopped Fiberglass Strands amzn.to/3STMekh
Fumed Silica White Powder amzn.to/3wmLgE4

[@frank_III]

The reason the side walls sag outward is due to no end wall that would hold them vertically true. Run a clamp across the end, pull the side walls inward until tru vertical then attach the end wall. Cut a door out after the endwall is full framed and attached to the roof.

[@Wreck-itRick]

I supported it from the bottom with a 2x6 brace. Easy and solid now. 💪