Basic flight planning and autopilot operation in the Cirrus Vision Jet in Microsoft Flight Simulator

Поділитися
Вставка
  • Опубліковано 30 вер 2024
  • A quick flight showing basic use of the flight management computer to program a flight, and then fly it using the autopilot in the Cirrus Vision Jet in Microsoft Flight Simulator. Along the way we talk about GPS navigation, VOR navigation, FLC (flight level change), VS (vertical speed mode), auto throttle, and finally do an ILS approach - capturing the glideslope in AP (approach) mode, and then taking over during finals for a manual landing.
    #msfs #flightsimulator #visionjet #garmin #g3000 #flying #aviation #navigation #tutorial #learning #howto #guide #beginner

КОМЕНТАРІ • 155

  • @brissiAU
    @brissiAU 10 місяців тому +11

    I was lucky enough to be a passenger in a vision jet, the pilot was quite impressed when I was asking questions, he actually asked if I have my ppl, I chuckled and said only in msfs 2020. Great vid.

  • @flutebasket4294
    @flutebasket4294 Рік тому +6

    Everything you need to know, right here

  • @stannardjoshuaable
    @stannardjoshuaable Рік тому +2

    You misinterpreted the FLC. IT will NOT automatically pick the best climb rate. You have to press FLC. then select (using the up-Dn wheel next to the FLC button) the speed you want to hold when you ascend. Or... press the auto throttle and FMS mode... it will then use the speed bugs you selected before take off...
    I enjoy watching your content

    • @jonbeckett
      @jonbeckett  Рік тому +1

      I may not have described it well - apologies if that was the case. It's a difficult thing to describe to people - that FLC will hold a target speed and convert excess or lack of thrust into climb or descent :)

  • @dagwood7794
    @dagwood7794 Рік тому +3

    I typed in "MSFS Vision Jet Autopilot" in the UA-cam search bar and yours was the first video listed. After watching your excellent and informative tutorial, no need to watch any others! You have a new subscriber to your excellent channel. Looking forward to more useful content. Best of the Holidays to you and your family...🎄

  • @pthine1
    @pthine1 Рік тому +1

    instead of ctrl shift home and end just assign a couple of buttons?

  • @GumperVanLier
    @GumperVanLier Рік тому +2

    Another excellent video and near perfect landing.

  • @mansmilling479
    @mansmilling479 4 місяці тому +1

    Why can't I turn on GPS? It only allows you to select NAV1, NAV2 and FMS

  • @FlyingVince72
    @FlyingVince72 Рік тому +1

    Hello Jonathan. I'm fighting with the configuration of my Honeycomb Bravo Throttle Quadrant. Don't know if you have one so if yes can you provide the detail of your configuration (in another video or maybe on a Discord channel or other) ? Thanks in advanbce.

    • @jonbeckett
      @jonbeckett  Рік тому +1

      Hi - sorry - I don't have a honeycomb, but I know some people that do. If you join the VirtualFlight.Online Discord server (visit bit.ly/virtualflightonlinediscord) there is a support forum - they will be more than happy to chip in there.

  • @blutowitz
    @blutowitz Рік тому +1

    The cursor you are using is small, white and difficult to follow. Try enlarging it and/or changing the color to emphasize where you're moving it.

    • @jonbeckett
      @jonbeckett  Рік тому

      I've since changed my monitor, which should help (lower resolution at this end)

  • @Blairvoyach
    @Blairvoyach Рік тому +3

    Wow, you are certainly pushing out the content and nearing the 10,000 subscriber mark! Well deserved too. Love the Vision jet, my current favourite. Any chance you can do an in depth tutorial on using Vnav and procedures too?

  • @JonahCBR
    @JonahCBR 9 місяців тому +1

    I can't see to be able to change the OBS course. Have you had any luck with this plane in MSFS?

    • @jonbeckett
      @jonbeckett  9 місяців тому

      From memory, I have used the keyboard - CTRL+ALT+HOME and END ?

  • @ysteineker7001
    @ysteineker7001 Рік тому +2

    Excellent explained and flight.
    It is a good practice to hit the TOGA button on the throttle knob, prior to takeoff. This will set the command cues for best initial climb rate and wings level. (At 5 degree during takeoff run). It is a shortcut for HDG set when lined up - just hit the button.
    Note that selected, but not active modes are shown in white on the annunciator panel. Ref approach - the GS is white until Jonathan flies into the GS. This is a vital check as this aircraft often fail to capture ILS.
    I am a noob with G3000 programming. I have problem with activating SID - STAR Approach and Arrival. I always mess up, and not able to modify (delete waypoints). I watched tutorials for other aircraft, but it does not help. Any new tutorial for programming (using Simbrief) in this aircraft would be much appreciated!

    • @jonbeckett
      @jonbeckett  Рік тому

      I'll take a look at Simbrief soon - it's one of the things I've not recorded a video about for ages.

  • @tel7625
    @tel7625 Рік тому +1

    Great video thanks.
    By the way when I switch nav modes it doesn’t say gps, it says FMS. Is that the same thing and changed in the newest update?

  • @dmnflights
    @dmnflights Рік тому +1

    Is there really no way to adjust the radial course for VOR other than assigning a hotkey? How is it done in the realy aircraft?

    • @jonbeckett
      @jonbeckett  Рік тому

      It's not finished in the G3000 yet. You'll notice in the PFD there is a disabled option. It's in there.

  • @07GoldWinger
    @07GoldWinger Рік тому +2

    You’ve done it again Jonathan! I appreciate how you respond to subscriber requests. Thank you for this. I was looking forward to it.

  • @davenottingham3254
    @davenottingham3254 Рік тому +2

    This video has made me buy the jet behind my wife’s back so I’m going to be in trouble in the next few days/hours. I hope you’re proud! Thank you so much though because I love it. I never knew about the little nav map so have just spent the last few hours messing with that. I’ve not watched the full video and learnt so much. Will be coming back to watch more of this and your other content soon. Easy decision to sub. Thank you again!

  • @bbecks04
    @bbecks04 Рік тому +1

    Is there a course knob if you want to fly green needles? Can’t figure it out for the life of me

    • @jonbeckett
      @jonbeckett  Рік тому

      Nope - I actually talk about it in the video. Hold CTRL +SHIFT down and use HOME and END on the keyboard to rotate the course. I found it in the keybindings.

  • @glyndavid2
    @glyndavid2 Рік тому +2

    Can't you load a pre made flight plan?

    • @Part_121
      @Part_121 Рік тому +1

      Sure, but that doesn't really teach you anything about the plane.

    • @jonbeckett
      @jonbeckett  Рік тому

      Yes, you can. Where's the fun in that though? :)

  • @starroger
    @starroger 6 місяців тому +1

    Great Video. Regarding descending and reducing speed at the same time, most pilots hate that. When working ATC, I had to decide which I needed from the pilot first--the speed or the altitude. It was either reduce speed then descend to assigned altitude or descend first to the assigned altitude then reduce to the assigned speed. Something to consider when simming with high performance aircraft (SF-50 is a medium performance aircraft, still something to think about when transitioning from the enroute to the approach mode of flight). What do you as a pilot need first?

    • @jonbeckett
      @jonbeckett  6 місяців тому +1

      Yep - I often take part in ATC controlled group flights in the simulator with a group called "MyAir" and will voluntarily hold my descent at 10,000ft to decerate to 250 knots - and plan ahead, knowing I'm going to do that. They tend to instruct "own navigation" at least until the STAR - often setting a marshalling point ahead of the star with an expected altitude and speed just to get everybody sequenced easily :)

    • @starroger
      @starroger 6 місяців тому

      @@jonbeckett Yes. "Own navigation" works fine in low density air traffic environments. In the real world, when traffic demand is high in the terminal airspace, controllers will impose altitude and speed restrictions early and often in order to predictably organize the arrival flow and landing sequence. ;o)

  • @pdep
    @pdep 6 місяців тому +1

    My active flt plan far rt-hand column shows FPA/SPD while yours in the video shows DTK/DIS which I would prefer. How do I change this, please?

    • @jonbeckett
      @jonbeckett  6 місяців тому +1

      I'll have to have a look next time I have the simulator loaded - I seem to remember you can configure the data via the FMS.

    • @pdep
      @pdep 6 місяців тому

      @@jonbeckett Please pop a comment ehere when you find it. Thanks.

  • @williamfrench9910
    @williamfrench9910 Рік тому +2

    Thanks for a very helpful and informative video! The Vision Jet is one of my favorites in the sim, and your instruction has given me confidence to use all the bells and whistles!

  • @unlimitedbagels
    @unlimitedbagels Рік тому +1

    I was trying ILS with this aircraft today. Must be going wrong somewhere because I couldn’t seem to get GPS to turn off. The frequency was already in the comms area and it seems you press the button to switch active ones? But didn’t seem to do anything. Pressing the nav button was just keeping gps on.

    • @jonbeckett
      @jonbeckett  Рік тому +1

      You need to change the nav source on the primary panel - from GPS to VOR. The NAV mode of the autopilot will operate for both VOR and GPS navigation.

    • @unlimitedbagels
      @unlimitedbagels Рік тому

      @@jonbeckett Thanks for the reply. I tried again with that and the HJet and looked over various things, and was successful.

  • @manic_miner
    @manic_miner Рік тому +2

    Your videos are so helpful and I love the way you explain everything. Thank you so much!

  • @marcw.5492
    @marcw.5492 Рік тому +1

    Weird issue - the lower screens are all black ?? Just downloaded from Marketplace MSFS. Cant light them up / turn on ?
    regards

    • @jonbeckett
      @jonbeckett  Рік тому

      Not seen that issue myself. Strange?!

    • @marcw.5492
      @marcw.5492 Рік тому

      Follow up - cuz I like this version of the Vision Jet much more than Xplane, others may have had similar issue.
      I emailed the developers... had to delete the G3000 Working Title stuff in my community folder. They recommended deleted all Working Title folders:
      ""Just checked and all of these files can go. They were all incorporated into the AAU series updates that you would have installed by now. They wont be needed anywhere.
      Nick Sdoucos
      FlightFX, LLC""
      It did fix the BLACK Screen Issues for all Touch Screen Controls (TCS?) screens and did not have any lingering issues that I can tell. HOWEVER ! I see a difference in your MFD Fl PLan screens and mine ?
      I note that my MFD does not show distances to next waypoint in my Fl PLan, which I have grown fond of. In fact under Fl PLAN Options I have mostly greyed out, and dont even see edit Data Fields as an option. gahhh ! I need to know the time, but building watches is more fun ... right ?

  • @stephenalberts6873
    @stephenalberts6873 Рік тому +1

    What key input did you use to change the green VOR CDI to a specific radial, as there's no CRS knob or way to select a specific radial, as you've mentioned in the video?

    • @jonbeckett
      @jonbeckett  Рік тому +1

      CTRL+SHIFT+HOME and CTRL+SHIFT+END :)

    • @stephenalberts6873
      @stephenalberts6873 Рік тому +1

      Whilst fiddling with the GTC screen and knobs, with a touch screen and knobster, it appears that the VOR course can now be set using the large touchscreen knob while in PFD mode.

  • @golfsierrahotel4806
    @golfsierrahotel4806 Рік тому +1

    Enjoyed that, thanks, just purchased this Vision Jet and struggling with ILS approach, possibly due to using the World map within MSFS to create a flight plan. I tried a few flights and even used simbrief to import a flight plan but when nearing the airport Im not acquiring the GS for some reason and watching your video would appear to agree with my settings?

    • @jonbeckett
      @jonbeckett  Рік тому +1

      That's a bit odd. If in doubt, turn the autopilot off and just land it by hand :)

    • @golfsierrahotel4806
      @golfsierrahotel4806 Рік тому

      @@jonbeckett Thanks, yes, I can do that and have done so but I would like to resolve the issue. Happy New Year.

  • @David-xk4xx
    @David-xk4xx Рік тому +2

    Ive just bought the Vision Jet having started to move from steam gauges to glass so this video was perfect for me. I found this concise, thorough and very easy to follow. Thank you for your work

  • @smjj08
    @smjj08 Рік тому +1

    Appreciate your videos, just purchased the jet. Question: how do you move around (your views) and how did you map this?

    • @jonbeckett
      @jonbeckett  Рік тому +1

      I use the cursor keys, and the mouse. I re-mapped the keyboard to move forwards and backwards with up/down instead of up and down :)

    • @smjj08
      @smjj08 Рік тому

      @@jonbeckett Thanks, I will try that.

  • @gabsmoscow
    @gabsmoscow 4 місяці тому

    Good video but a tutorial should explain what you're doing...you're pushing buttons without saying a word...

  • @viniciusmm857
    @viniciusmm857 17 днів тому

    Best tutorial. Clear and objectiv! Congrats from Brazil

  • @luarvikluarvik4276
    @luarvikluarvik4276 5 місяців тому +1

    Thank you!

  • @nicknicholson1268
    @nicknicholson1268 Рік тому +1

    Thanks for your excellent tutorial. A few questions please: On short final how do you get rid of YD? By disconnecting the FD? After AP disconnect, why is the light still on for Manual mode on AP? I botched badly a landing yesterday after a 2 hours flight, went for a go around 2 times and stick and throttle would go absolutely crazy; very frustrating. Killed the aircraft:) Your subscriber, Nick from Sydney Australia. Cheers!

    • @nicknicholson1268
      @nicknicholson1268 Рік тому +1

      I rectify: Why is the light still on for Manual mode on AT (Auto Throttle) down on the pedestal? Sorry.

    • @jonbeckett
      @jonbeckett  Рік тому

      That sounds a bit odd! Are you sure you disengaged the autopilot? Without being there and seeing it, it's difficult to say what happened.

    • @nicknicholson1268
      @nicknicholson1268 Рік тому

      @@jonbeckett I am sure I disengaged it. Anyway, today I have done exactly the same flight in the TBM 930, landing on the same runway, and it was very nice. I will do later this week another flight in the Cirrus Vision Jet, and I will play with connect/disconnect AP and AT several times. I will let you know. It was very odd, indeed. Thanks to your answer, and also to the TBM, I feel much better now:) Much appreciated!

  • @fadi8396
    @fadi8396 Рік тому +1

    On approach Vision Jet aircraft still do not the use correct course via AP, what is the problem.

    • @jonbeckett
      @jonbeckett  Рік тому +1

      You must have missed something in the aircraft. Did you switch to VOR/LOC on the CDI, away from GPS when you got to approach (presuming you're talking about ILS) ?

    • @fadi8396
      @fadi8396 Рік тому

      @@jonbeckett Yes, I am talking about ILS and NDB, knowing that I make the flight plan from the main menu.

  • @pdep
    @pdep 6 місяців тому +1

    Well up to your usual excellent standard. Thank you - much appreciated.

  • @kirillaravanis493
    @kirillaravanis493 7 місяців тому +1

    Very informative, really nice to understand on how to navigate on vor and gps

  • @kokoeteantigha389
    @kokoeteantigha389 Рік тому +1

    I have saved this licketty split for later use, and at my leisure to follow the tips one after the other. Thanks Jon because but for your intervention this would've been another aircraft bought and immediately mothballed away in my hanger. With your videos, I intend to revisit all of them (eg the Boeing 247, the Honda Jet and the Bae) and to enhance my proficiency with even the ones im flying more frequently. Once again, much thanks.

    • @jonbeckett
      @jonbeckett  Рік тому

      Glad to have helped and hope you enjoy your flying

  • @pthine1
    @pthine1 Рік тому +1

    by the way you're videos are excellent

  • @moschidreamer
    @moschidreamer Рік тому +1

    18:26 Oh no! "It has no button to do it..." (kidding) I wanted to know exactly this where I can change the NAV couse in the Cockpit. In VR I do not have any Keyboard :/

    • @jonbeckett
      @jonbeckett  Рік тому

      Heh - CTRL+SHIFT+HOME and END :)

    • @moschidreamer
      @moschidreamer Рік тому +1

      @@jonbeckett Do the real pilots have a keyboard too?

    • @jonbeckett
      @jonbeckett  Рік тому

      @@moschidreamer of course not :) But they also don't have to fish around with a mouse to roll knobs.

  • @captm1297
    @captm1297 Рік тому +1

    (This may be a little hard to explain but I'll try my best) I have nav mode on and autopilot on. So when I come into a approach when I pass the waypoint before the approach transition instead of it taking me to the approach transition it takes me to the last fix on final approach. So my question is, how do I get the nav mode to take me to the transition fix? (I'm on ILS)

    • @jonbeckett
      @jonbeckett  Рік тому

      When you get near the ILS, go to heading mode and direct yourself towards it (if the flight plan hasn't already done that). Then switch the CDI to VOR mode - which will make the HSI show the localizer and glideslope markers.
      I'll do a video about it.

    • @captm1297
      @captm1297 Рік тому

      @@jonbeckett thank you this has made my approach so much easier.

    • @jonbeckett
      @jonbeckett  Рік тому

      @@captm1297 The point about all of this is the automated systems are there to help - not to do it for you :)

  • @irk72ag
    @irk72ag 7 місяців тому

    In reality, this aircraft has an auto-landing function. Is the auto-landing function implemented in this aircraft model in the game?

  • @SoulLinker964
    @SoulLinker964 8 місяців тому

    The VS Mode isnt working for me after a full shutdown and restart of the systems. Anyone else experiencing this issue?

  • @nigelsmith721
    @nigelsmith721 Рік тому +1

    First class.
    Great video - crystal clear tuition. Thanks.

  • @seanpinnell4806
    @seanpinnell4806 Рік тому +1

    Jonathan, looks like the Vision Jet just got an update. SimBrief integration and some other features I haven't explored thoroughly yet. Might be time for another video? :)

  • @richritter
    @richritter Рік тому +1

    Great video! I love this plane and you've helped tremendously. Later today I will try doing an ILS landing into L.A. from Las Vegas! Thanks mate!

  • @DCSHacks
    @DCSHacks 10 місяців тому +1

    Love it! This was just what I needed!

  • @mikecoffee100
    @mikecoffee100 Рік тому +1

    Spot on video as usual but I just can not purchase this aeroplane no matter how little it costs atm. And All The Best for The Holidays .

  • @roadcyclist1
    @roadcyclist1 Рік тому +1

    You were trying to put ice protection to full screen. You needed to rotate the pane nob back to your map then hit full. Alternatively, you could just hit map button then hit full.

  • @DerrenNesbitt-ji7li
    @DerrenNesbitt-ji7li Рік тому +1

    Great but where is GPS ? I can only get FSM

  • @jayteeaitch
    @jayteeaitch Рік тому +1

    I learn soooh much from you - thanks - you are aware no doubt of the big updates due on this aircraft and the super changes
    to the Honda jet - FlightFX discord today

    • @jonbeckett
      @jonbeckett  Рік тому

      Yep - I'll be re-visiting it soon :)

  • @Sekuru_Dread
    @Sekuru_Dread Рік тому +1

    Thanks for a great Video, Just wanted to ask if Auto Throttle can be engaged prior to Take-Off to engage TOGA on the PFD?

    • @jonbeckett
      @jonbeckett  Рік тому

      Good question - I'm afraid I have no idea (and don't have the sim running at the moment to check).

  • @eddyg1794
    @eddyg1794 Рік тому +1

    Informative and entertaining! Thx for this.

  • @garethbritton3551
    @garethbritton3551 Рік тому +1

    Great Video! Just what I needed to help me understand how to use the SF50 avionics properly.

  • @adiedri38
    @adiedri38 6 місяців тому

    Great video, any idea why FMS shows and not GPS? Thanks

  • @wholearmor1790
    @wholearmor1790 Місяць тому

    I wish I can be your student in your discord, cus I need your help

  • @tonylanders1196
    @tonylanders1196 3 місяці тому

    Great vid thks. Just got the vision and yrying to learn about it

  • @ironmanballer4868
    @ironmanballer4868 Рік тому +1

    Love the video very informative. One thing I’m trying to figure out is what the adf and the other one are used for I fly the Cessna 414 a lot I know the aircraft like the back my head but never able to figure out what that system is used for.

    • @jonbeckett
      @jonbeckett  Рік тому +1

      ADF = Automatic Direction Finder. ADF beacons were a fore-runner of VOR beacons - there are not many of them around any more. If you look on a map and find an "NDB" (non directional beacon), you will be able to tune the ADF radio receiver into it, and get the direction to it. They are called "non directional" because there is no way of establishing where you are in relation to a specific radial (which VORs can do through the HSI and CDI instruments in the cockpit).

  • @fmaples1
    @fmaples1 Рік тому +1

    Thanks for a great video. You've just made the easiest tutorial on the Vision jet's nav system I've come across. Because of this you have a new subscriber. Looking forward to more.

  • @Vondoodle
    @Vondoodle Рік тому +1

    Thanks for the video

  • @unlimitedbagels
    @unlimitedbagels Рік тому +1

    Great guide thank you! This aircraft is perfect for taking in sights and I think I’ll use it for community flying events.

    • @jonbeckett
      @jonbeckett  Рік тому +1

      It is good for sight-seeing :)

  • @District.24
    @District.24 Рік тому

    Hello. I don’t understand how to use the throttle in cruising and descending and landing. If I want to descend, what % thrust should I set the throttle too? If I’m trying to land, what should the % thrust be then?

    • @jonbeckett
      @jonbeckett  Рік тому

      There is no specific setting. Set your throttle based on the attitude, and speed required :)

  • @lcann251
    @lcann251 9 місяців тому

    @jonbeckett I really appreciate this video. But I seem to be missing something when I try and do this. I don't ever have GPS available on my Nav Source. I can toggle between FMS, LOC1, LOC2 and back to FMS again, and thus, my plane will not fly the flight plan. It's frustrating to say the least. Not sure what to do to resolve that

  • @luisvazquez7212
    @luisvazquez7212 Рік тому +1

    Hi Jonathan
    I'm trying to reproduce what you do in the video, but for some reason after landing and engage autopilot the plane suddenly changes course and starts to fall after 10 or 20 seconds. Flaps are at 0, hdg addresed to the route and nav, fd and autopilot are engagged and activated. Of course flight plan is loaded as you explain in your video. Any suggestion about what am I doing incorrectly or missing? Thanks in advance !!!

    • @jonbeckett
      @jonbeckett  Рік тому

      Difficult one to diagnose without seeing it. You might want to post in the support channel at VirtualFlight.Online's discord server - you'll get lots of people help you then :)

    • @luisvazquez7212
      @luisvazquez7212 Рік тому

      @@jonbeckett Thanks a lot Jonathan for your quick response, I will get a try

  • @jazzyjeff001
    @jazzyjeff001 Рік тому +1

    Thank you Look forward to when you do a IFR flight planning.

  • @nolimo2593
    @nolimo2593 Рік тому +1

    Thank you so much. I've started to fly a bit more seriously in MSFS and i honestly dont know half the things about flying.

    • @jonbeckett
      @jonbeckett  Рік тому

      You're welcome - I'm learning too - I'm just a page or two ahead of you in the book :)

    • @nolimo2593
      @nolimo2593 Рік тому

      @@jonbeckett Guess I'm just a very slow reader then😉

  • @PatJones82
    @PatJones82 Рік тому +1

    This was outstanding sir. Well done and thank you! :)

  • @jonknipe8997
    @jonknipe8997 Рік тому +1

    Great tutorial, cheers!

  • @RM-my9dn
    @RM-my9dn 5 місяців тому

    GREAT Vid! Thank you!

  • @Koka_Moka
    @Koka_Moka Рік тому

    I don‘t understand how to change the course. Could you tell me the keys again because I tried holding down shift and ctrl pressed end and home and it did not work. Great video thanks

    • @jonbeckett
      @jonbeckett  Рік тому

      Press the modifier keys down at the bottom left of the keyboard, then while holding them down, press home or end to rotate the course. I'm basing this on the default keyboard mappings in the simulator - if you've changed the mappings, that's why it's not working. You can find them in the keyboard profile configuration.

  • @flybeeson7950
    @flybeeson7950 Рік тому +1

    Thanks

  • @danceswithsheep3058
    @danceswithsheep3058 Рік тому +1

    Shink? Don’t shink? Are my ears in need of cleaning?

    • @stuarts1059
      @stuarts1059 Рік тому +1

      I heard 'Don't sing'. I'll put that down to my old ears.

    • @jonbeckett
      @jonbeckett  Рік тому

      Sink :)

  • @flybeeson7950
    @flybeeson7950 Рік тому

    I have been slowly building my knowledge of the auto pilot in this plane, and have watched several UA-cam videos by others. This is by far the best video on the subject that I have seen, packed with so much useful information and demonstrated so well by showing the plane’s position on the map view.
    As a sort of bonus it covered the auto throttle as well plus lots of additional tips on flying the Vision Jet. I have made extensive notes. Thanks very much Jonathan.

    • @jonbeckett
      @jonbeckett  Рік тому

      Glad you found the video useful - thanks for the nice comments

  • @ravelino123
    @ravelino123 Рік тому

    Great video, thanks. How did you (or someone that know, please reply) do to have a green/blue map? In my land is always black.

    • @jonbeckett
      @jonbeckett  Рік тому

      It's an option in the MFD

    • @ravelino123
      @ravelino123 Рік тому

      @@jonbeckett Thanks. I will check to find that option later.

    • @ravelino123
      @ravelino123 Рік тому +1

      @@jonbeckett I have found. Is the option Terrain = Absolute under Map Settings on MFD. Thanks again

  • @PatriotCody
    @PatriotCody Рік тому

    I was having the hardest time with autopilot in the vision it seems like when engaged it doesnt even go where its supposed to. Hopefully your tips help.

  • @AJ-yw5zy
    @AJ-yw5zy Рік тому

    Another cracking, very informative video, Jonathan.

  • @DDheliservice
    @DDheliservice Рік тому

    I'm so glad you made this tutorial of my favorite airplane. The way you explain everything is so pleasant to watch. Every time I learn new things from you that make the flight sim so enjoyable. Many thanks for this and I look forward to seeing what possibilities there are still with this aircraft such as ILS approach landings, etc. I am so glad I found your channel, the best there is!

    • @jonbeckett
      @jonbeckett  Рік тому

      Thanks for your comments and glad you find my little vids useful

  • @abutahirghazweeni5563
    @abutahirghazweeni5563 Рік тому

    Excellent performance Jonathan